Door replacement costs range from $300 to $1,500 per door depending on the vehicle, the door type, and whether you use a salvage part or new OEM part
A single door replacement typically costs between $300 and $1,500 in labor and parts combined. The wide range exists because door prices vary dramatically by vehicle make and model — a door for a Honda Civic runs far less than one for a luxury sedan or truck. Labor usually accounts for $150 to $300 of that total, though some shops charge more in high-cost areas. The part itself is where the biggest variation happens: a used door from a salvage yard might cost $200 to $400, while a new door from the manufacturer can run $800 to $1,200 or more.
Your actual bill depends on three concrete choices: which door you're replacing (front doors cost more than rear), whether you buy new or used, and which shop does the work. A rear door on a common sedan using a salvage part might total $400 to $600. A front door on a truck using a new OEM part could easily exceed $1,200. Getting quotes from at least two shops before committing is the only way to know what your specific vehicle will cost.
Key Takeaways
- Labor for door replacement typically runs $150 to $300, but the part cost varies wildly based on whether you choose a new OEM door or a used salvage door.
- Front doors cost more to replace than rear doors because they contain more hardware like window regulators and power locks.
- A new OEM door from the manufacturer costs significantly more than a used door from a salvage yard, but comes with a warranty and may provide fit.
- Getting written quotes from multiple shops prevents surprises, since pricing varies by location and shop labor rates.
- Some insurance policies cover door damage under collision or comprehensive coverage, which may reduce or eliminate your out-of-pocket cost.
Why front doors cost more than rear doors
Front doors contain more mechanical components than rear doors, which drives up both the part cost and labor time. A front door typically includes a power window regulator, power lock actuator, door latch mechanism, and sometimes a side mirror. A rear door usually has only a manual or power window regulator and a basic latch. When a shop replaces a front door, they must transfer or reinstall these components, adding 30 minutes to an hour of labor beyond the basic door swap.
The part itself reflects this difference. A new front door for a mid-size sedan costs $800 to $1,200, while a new rear door for the same vehicle runs $600 to $900. Used doors follow the same pattern. This is why a front door replacement on a common vehicle often lands near the higher end of the $300 to $1,500 range, while a rear door replacement stays closer to the middle.
New OEM doors versus salvage doors
A new OEM (Original Equipment Manufacturer) door comes directly from the car maker or an authorized parts distributor. It arrives unpainted, unassembled, and with all original hardware. You pay the full manufacturer price, which for many vehicles runs $800 to $1,500 for a front door. The advantage is a warranty — typically 12 months or longer — and the certainty that every component will fit and function correctly. If something goes wrong after installation, the shop or manufacturer covers the repair.
A salvage door comes from a wrecked vehicle at a junkyard or salvage supplier. The price is usually 40 to 60 percent less than new — often $300 to $600 for a front door. The catch is that you buy it as-is: if the window regulator is broken or the latch is damaged, that's your problem. Salvage doors also arrive painted, so the color may not match perfectly if the original car was repainted or if the paint has faded. Most salvage doors come with no warranty, though some yards offer a 30-day return period if the door is defective on arrival.
For many people, a salvage door makes sense if the vehicle is older, has high mileage, or if you're on a tight budget. For newer cars or if you plan to keep the vehicle long-term, a new OEM door reduces the risk of hidden damage and gives you recourse if something fails.
Labor costs and what the shop actually does
Door replacement labor typically runs $150 to $300 per door, though shops in major cities or high-end dealerships may charge $300 to $400. The work itself is straightforward: the technician removes bolts that attach the door to the hinges, disconnects the wiring harness for power windows and locks, and lifts the old door off. Then they reverse the process with the new door, test all functions, and adjust the door alignment so it closes smoothly without rubbing.
If you're replacing a door with a salvage part, the shop may spend extra time transferring components from your old door to the salvage door — for example, moving your door handle, lock cylinder, or interior trim panel if the salvage door doesn't have them. This can add $50 to $150 to the labor bill. Some shops include this in their quoted labor rate; others charge it separately. Always ask whether component transfer is included in the quote.
Paint and body work are separate from door replacement. If the new door needs to be painted to match your car, expect an additional $200 to $500 depending on the paint type and shop rates. A salvage door that's already painted may need only a blend or clear coat, which costs less. A new OEM door always needs painting unless you order it pre-painted from the dealer, which adds to the part cost.
How to get an accurate quote
Call or visit at least two shops with your vehicle's year, make, model, and the specific door you need replaced (driver's front, passenger rear, etc.). A good quote includes the part cost, labor cost, and any additional charges like paint or component transfer. Ask whether the shop uses new OEM parts, salvage parts, or both, and what warranty comes with each option.
If you're getting a quote from a dealership, expect to pay more than an independent shop — dealerships typically charge higher labor rates and use only new OEM parts. Independent body shops and general repair shops often offer lower labor rates and may source salvage parts if you request it. Insurance companies sometimes have preferred shops that may offer discounts if you use them.
Get the quote in writing before authorizing work. A written quote protects you if the shop discovers additional damage during removal and tries to charge extra. If the shop finds rust, hidden damage, or complications, they should contact you before proceeding and provide a revised estimate.
Insurance coverage for door replacement
Whether your insurance covers door replacement depends on your policy and what caused the damage. Collision coverage pays for door damage from accidents, even if you're at fault, minus your deductible. Comprehensive coverage pays for door damage from theft, vandalism, weather, or hitting an animal, also minus your deductible. Liability coverage does not cover your own vehicle's damage.
If you have collision or comprehensive coverage and file a claim, your insurance company will typically send an adjuster to inspect the damage and approve a repair estimate. The insurer may have a preferred shop, or you may be able to choose your own. Once approved, you pay your deductible and the insurance covers the rest. If the repair cost is less than your deductible, you pay the full amount out of pocket.
For minor damage or if your deductible is high, it may cost less to pay out of pocket than to file a claim. Filing a claim can also increase your premium at renewal, so weigh the repair cost against the potential rate increase before deciding. Contact your insurance agent to understand your coverage and get a sense of whether a claim makes financial sense in your situation.
Timeframe for door replacement
A straightforward door replacement typically takes one to three hours of shop time. If you're using a salvage door that's already in stock, the shop may complete the work the same day or within 24 hours. If you're ordering a new OEM door, lead time depends on the vehicle and dealer — common models may arrive in a few days, while less common vehicles can take one to two weeks.
Paint and body work add time. If the door needs to be painted, add one to three days for the paint to cure properly before the car is ready to drive. Some shops can rush paint work, but quality suffers if you push too hard. If you're in a hurry, ask the shop whether they have a pre-painted door in stock or can source one from a local salvage yard.
Frequently Asked Questions
Can I replace just the outer door panel instead of the whole door?
In some cases, yes. If the damage is only to the outer skin and the frame, hinges, and internal components are intact, a body shop can sometimes replace just the outer panel. This costs $400 to $800 in labor and materials and takes longer than a full door swap. However, if the frame is bent or the hinges are damaged, the whole door must be replaced. A shop can tell you which option applies after inspecting the damage.
What if I buy a door myself and bring it to the shop?
Most shops will install a door you provide, though they may charge a slightly higher labor rate since they're not selling you the part. Bring a door that matches your vehicle's year, make, and model exactly — even a year off can cause fit problems. Get a written agreement on labor cost before dropping off the door, and confirm the shop will warranty their installation work even though you supplied the part.
Will a door from a different color car work if I repaint it?
Yes, as long as the door is from the same year and model. The underlying structure is identical. You'll need to have it painted to match your car, which costs $200 to $500. This is a common way to save money — a salvage door in a different color costs less than one in your color, and the paint cost is usually still less than buying a new OEM door.
Does door replacement affect my car's resale value?
A properly replaced door with quality paint work has no impact on resale value. Buyers care that the door functions smoothly and the paint matches. A poorly done replacement with mismatched paint or a door that doesn't close properly will lower value. Use a reputable shop and keep the receipt showing the work was done professionally.
What if the door frame or hinges are damaged?
If the frame or hinges are bent, the repair becomes more complex and expensive. A bent frame may require welding or frame straightening, which can cost $500 to $1,500 or more. Damaged hinges can sometimes be replaced separately for $200 to $400. Have a shop inspect the frame and hinges before committing to a door replacement — the total repair cost may be higher than a straightforward door swap.