Building a plane is not a vehicle maintenance task — it's aircraft manufacturing, and it sits outside the scope of what most people can legally or practically do
If you arrived here from general auto maintenance, you're looking at something fundamentally different. Building a car from parts is a hobby thousands of people pursue in garages. Building a plane is a federal regulatory project that requires engineering certification, airworthiness documentation, and approval from the Federal Aviation Administration (FAA) before you can legally fly it.
The distinction matters because the consequences of a mistake are not a repair bill — they're a crash. The FAA treats homebuilt aircraft seriously, and so should you.
Key Takeaways
- The FAA allows amateur-built aircraft under Part 103 (ultralight) and Part 23 (experimental amateur-built), but both require specific documentation and inspection before flight.
- An ultralight under Part 103 can weigh no more than 254 pounds empty and costs $5,000 to $25,000 in materials, but you cannot carry a passenger or fly over populated areas.
- An experimental amateur-built aircraft under Part 23 costs $15,000 to $100,000+ and requires you to log at least 40 hours of construction before the FAA will inspect it.
- You must obtain a Special Airworthiness Permit from the FAA and pass a final inspection before the plane is legal to fly.
- Most builders use a kit from an established manufacturer (Vans, Zenith, Kitfox) rather than designing from scratch, because kits come with engineering data the FAA already accepts.
The two legal paths: ultralight versus experimental amateur-built
The FAA recognizes two categories of homebuilt aircraft. Part 103 ultralight is the simpler route: a single-seat aircraft weighing no more than 254 pounds (empty weight, no fuel or pilot). You do not need a pilot's license to fly it, and you do not need FAA approval before you build. You do need to register it with the FAA and obtain a registration number, which costs $5 and takes a few weeks by mail.
The catch is severe: you cannot carry a passenger, you cannot fly over a congested area or open-air assembly of people, and you cannot fly for compensation. You also cannot fly at night or in instrument conditions. An ultralight is a fair-weather, solo machine.
Part 23 experimental amateur-built is the path if you want to carry a passenger, fly longer distances, or build something more capable. You need a pilot's license (at least a sport pilot certificate), and you must get FAA approval before you fly. The process starts with a Special Airworthiness Permit, which requires you to document your design, prove you've built at least 51 percent of the aircraft yourself, and pass an FAA inspection.
Part 23 aircraft can be heavier and more complex, but the regulatory burden is much higher. You'll spend months on paperwork and inspections before the first flight.
Kits versus scratch-built: why most builders use kits
You can design and build an aircraft entirely from scratch, but almost nobody does. The reason is engineering data. The FAA requires you to prove your design is safe, and that means providing calculations, stress analysis, and performance data. If you use a kit from an established manufacturer like Vans Aircraft, Zenith Aircraft, or Kitfox, the manufacturer has already done that work and submitted it to the FAA. Your job is to build it correctly.
A kit includes all the parts you need (fuselage, wings, engine mount, control surfaces), detailed assembly instructions, and engineering documentation the FAA recognizes. Kits range from $15,000 to $100,000 depending on the aircraft type and whether you buy an engine separately. A scratch-built design requires you to do the engineering yourself or hire an engineer, which adds months and tens of thousands of dollars.
Popular kit manufacturers include Vans Aircraft (RV series, ranging from two-seat to four-seat), Zenith Aircraft (high-wing designs, often with bush-flying capability), and Kitfox (light sport aircraft). Each has a community of builders who share experience and troubleshooting information online.
The build process and timeline
A typical kit build takes 1,000 to 2,500 hours of work, spread over one to three years depending on how much time you spend in the shop. You'll need a workspace (a garage or small hangar), basic hand tools, and some specialized equipment like a rivet gun or welding setup depending on the aircraft type.
The FAA requires you to document your work. For Part 23 experimental amateur-built, you must log at least 40 hours of construction time and be able to prove you did the work yourself. Keep receipts, take photos of major assembly steps, and maintain a build log. When you're ready for inspection, the FAA will review this documentation and may ask you to disassemble parts to verify the quality of your work.
After you finish the build, you submit your paperwork to the FAA, request a Special Airworthiness Permit, and schedule an inspection. The inspector will examine the airframe, engine, propeller, and systems. If everything passes, you receive the permit and can conduct a series of test flights (usually 25 to 50 hours) before the aircraft is considered fully airworthy.
Costs: materials, tools, and engine
A kit itself costs $15,000 to $50,000 for a two-seat aircraft. An engine (new or used) typically runs $8,000 to $30,000. Avionics (instruments, radios, GPS) add another $5,000 to $20,000 depending on how equipped you want to be. Miscellaneous hardware, fasteners, paint, and materials add $2,000 to $5,000.
Total cost for a completed experimental amateur-built aircraft is usually $30,000 to $100,000. An ultralight kit is cheaper — $5,000 to $25,000 — because the aircraft is simpler and lighter.
Beyond the build, you'll need hangar space (typically $100 to $400 per month), insurance (roughly $500 to $1,500 per year for a homebuilt), and fuel. Operating costs are lower than a certified aircraft, but not zero.
Insurance and liability
Homebuilt aircraft are insurable, but the policy is different from a standard general aviation policy. You'll need experimental aircraft liability insurance, which covers hull damage, liability, and medical payments. Insurers will ask about your pilot experience, the aircraft type, and how you plan to use it.
Premiums vary widely based on the aircraft and your history. A typical experimental amateur-built policy costs $500 to $1,500 per year. Ultralight insurance is cheaper or sometimes not required, depending on the insurer and your state.
Liability is serious. If your aircraft causes injury or property damage, you're responsible. Insurance protects you, but it also means the insurer will investigate any accident. Build carefully and fly conservatively.
Where to find kits, communities, and technical help
Major kit manufacturers have websites with detailed specifications, build manuals, and customer support. Vans Aircraft, Zenith Aircraft, and Kitfox all maintain active builder communities with forums and local chapters. These communities are invaluable — you can ask experienced builders about problems, get information on tool choices, and find local people who've built the same aircraft.
The Experimental Aircraft Association (EAA) is the main organization for homebuilt aviation. They host AirVenture (an annual fly-in in Oshkosh, Wisconsin) where thousands of homebuilt aircraft gather, and they publish technical resources and builder guides. Membership costs around $60 per year and includes access to their magazine and online resources.
Local EAA chapters meet monthly and often have workshop facilities. If you're serious about building, joining a chapter near you is one of the best investments you can make.
Frequently Asked Questions
Do I need a pilot's license to fly a homebuilt aircraft?
For Part 103 ultralight, no — you can fly without any license. For Part 23 experimental amateur-built, yes — you need at least a sport pilot certificate, which requires 20 to 60 hours of flight training and a written test. A sport pilot certificate is simpler than a private pilot certificate but still requires formal instruction.
How long does FAA inspection take?
After you submit your paperwork and request a Special Airworthiness Permit, the FAA typically responds within four to eight weeks. The actual inspection (when an FAA inspector visits your aircraft) usually takes a few hours to a full day. If the inspector finds issues, you'll need to fix them and request a re-inspection.
Can I sell a homebuilt aircraft I built?
Yes, but it must retain its experimental amateur-built designation and the new owner must be aware of the restrictions. You cannot convert it to a standard airworthiness certificate. The resale value is typically 50 to 70 percent of the build cost, depending on the aircraft type and condition.
What happens if I make a mistake during construction?
Minor mistakes can usually be corrected during the build. Major structural errors (incorrect rivet spacing, wrong material thickness, poor welds) will be caught during FAA inspection and must be fixed before you can fly. This is why documentation and following the kit manual exactly are critical — rework is expensive and time-consuming.
Is building a plane cheaper than buying a used certified aircraft?
Not always. A used certified aircraft (a Cessna 150 or Piper Cub) costs $15,000 to $40,000 and is ready to fly when ready. A homebuilt costs $30,000 to $100,000 and takes years to complete. However, a homebuilt is often faster, more efficient, and more fun to fly — the value is in capability and satisfaction, not cost savings.