Bobcat Track Loaders Are Compact Machines Built for Rough Terrain
A Bobcat track loader is a small, wheeled or tracked vehicle designed to move materials and dig in tight spaces where larger equipment cannot fit. Instead of wheels, track loaders use continuous rubber or steel tracks — like a tank — that spread the machine's weight across soft ground, mud, or snow without sinking or getting stuck. The front bucket lifts and dumps loads of dirt, gravel, mulch, or debris.
Bobcat is the brand name most people use for this type of machine, much like how some people call all tissues "Kleenex." The company makes several models, but other manufacturers like Caterpillar, John Deere, and Kubota build similar machines. Track loaders are common on construction sites, landscaping jobs, farms, and anywhere the ground is uneven or wet.
Unlike a full-size excavator or bulldozer, a track loader is small enough to fit through a residential gate or into a basement renovation. A typical Bobcat track loader weighs between 4,000 and 10,000 pounds and costs between $25,000 and $60,000 new, though used models are often available for less. Rental is usually $150 to $300 per day, depending on the model and location.
Key Takeaways
- Track loaders use continuous rubber or steel tracks instead of wheels, letting them work on soft, wet, or uneven ground without sinking.
- The front bucket can dig, scoop, and dump materials, and some models accept attachments like augers, grapples, or snow blowers.
- Track loaders are smaller and lighter than excavators, making them useful for tight spaces like residential yards and basement work.
- Renting a track loader typically costs $150 to $300 per day, while buying new ranges from $25,000 to $60,000 depending on size and features.
How the Tracks and Bucket Work Together
The tracks are the machine's main advantage. Each side has a continuous rubber or steel belt that loops around wheels and sprockets, spreading the loader's weight over a larger area than wheels would. This lower ground pressure means the machine can work on mud, sand, or snow without sinking, and it causes less damage to finished lawns or landscaping than wheeled equipment.
The bucket at the front is controlled by hydraulic arms. The operator sits in a cab or on an open seat and uses joysticks or levers to raise, lower, and tilt the bucket. A single machine can scoop material from the ground, lift it several feet high, swing the bucket sideways, and dump the load into a truck or pile. Some buckets have teeth for digging hard ground; others are smooth for handling mulch or sand.
The engine powers both the tracks and the hydraulic system. Most track loaders use diesel engines ranging from 25 to 100 horsepower. Larger models can lift heavier loads and dig deeper, but they also cost more to rent or buy and require more fuel.
Track Loaders Versus Wheeled Loaders and Skid Steers
A wheeled loader looks similar but has four large tires instead of tracks. Wheeled loaders are faster on solid ground and easier on paved surfaces, but they sink into mud and soft soil. They are better for moving materials short distances on job sites with hard-packed ground.
A skid steer is a smaller, four-wheeled machine with a bucket and is the most common loader on small construction sites. Skid steers are cheaper to rent ($75 to $150 per day) and fit into tighter spaces, but they cannot work on soft ground as well as track loaders and they can tear up grass or landscaping more easily.
Track loaders sit between skid steers and full-size excavators in terms of size, cost, and capability. Choose a track loader if you need to dig or move materials on wet, soft, or uneven ground and you have a space at least 6 to 8 feet wide to work in. Choose a skid steer if the ground is firm and the budget is tight. Choose a wheeled loader if you are moving materials mostly on paved or hard-packed surfaces.
Common Attachments and What They Do
The bucket is the standard attachment, but most track loaders accept other tools that bolt onto the hydraulic arms. A grapple is a claw that grabs and holds logs, branches, or scrap metal. An auger is a rotating drill bit that bores holes for fence posts or tree planting. A breaker is a pneumatic hammer that breaks concrete or rock. A snow blower or snow pusher turns the loader into a snow removal machine.
Attachments add $2,000 to $10,000 to the purchase price or $50 to $150 to the daily rental cost. Rental yards usually stock buckets, grapples, and augers; specialty attachments like breakers may need to be ordered in advance or may not be available in your area.
Maintenance and Operating Costs
Track loaders require regular maintenance to stay reliable. The tracks themselves wear out and may need replacement every 1,500 to 3,000 hours of use, costing $3,000 to $8,000 per pair depending on the model. The hydraulic fluid, engine oil, and filters need changing every 250 to 500 hours. The engine air filter and fuel filter also need regular replacement.
If you own a track loader, budget for an annual inspection and maintenance visit, which typically costs $500 to $1,500. Repairs outside of routine maintenance — such as fixing a hydraulic leak or replacing a sprocket — can run $1,000 to $5,000 depending on the problem. For this reason, many contractors and homeowners rent rather than buy.
Fuel consumption varies by model and how hard the machine is working. A typical track loader burns 1 to 3 gallons of diesel per hour. Diesel costs vary by region, but budget $4 to $6 per gallon. A full day of work (8 hours) might use 8 to 24 gallons, adding $30 to $150 to the job cost.
When to Rent Versus Buy a Track Loader
Rent a track loader if you need it for a single project lasting a few days or weeks. Rental is the lower-cost option for one-time jobs like clearing a lot, digging a pond, or moving a large pile of mulch. Most rental yards deliver and pick up for a fee, usually $100 to $300 each way.
Buy a track loader if you use one regularly — for example, if you run a landscaping or excavation business, manage a large property, or do frequent construction work. Ownership makes sense if you will use the machine at least 200 to 300 hours per year. Buying also gives you the flexibility to keep the machine on-site and use it whenever you need it, without waiting for a rental yard to have one available.
Financing a new track loader typically requires a down payment of 10 to 20 percent and a loan term of 3 to 7 years. Used machines can be purchased outright or financed for less, but inspect the tracks, hydraulics, and engine carefully before buying. A pre-purchase inspection by a dealer or mechanic familiar with the brand costs $200 to $500 but can save you from buying a machine with hidden damage.
Safety and Operator Requirements
Operating a track loader does not require a special license in most states, but many employers and rental yards require the operator to have completed a training course. The Occupational Safety and Health Administration (OSHA) publishes guidelines for safe operation, and several organizations offer certification programs lasting one to three days.
Basic safety rules include keeping bystanders at least 25 feet away from the machine, never carrying passengers in the bucket, wearing a seatbelt if the machine has a cab, and never leaving the machine running unattended. Track loaders can tip over if operated on steep slopes or if the bucket is raised too high while the machine is moving. Always read the operator manual for your specific model before starting work.
Frequently Asked Questions
Can a track loader work on a paved driveway or parking lot?
Yes, but the tracks can leave marks or minor damage on asphalt, especially in hot weather when the asphalt is soft. If you need to work on pavement, ask the rental yard about rubber tracks, which are gentler than steel tracks. Lay plywood under the tracks if the surface is new or in excellent condition.
How deep can a track loader dig?
Most track loaders can dig 3 to 5 feet deep, depending on the model and bucket size. Larger models dig deeper. If you need to dig deeper than 6 feet, a full-size excavator is a better choice.
What is the difference between rubber and steel tracks?
Rubber tracks are quieter, cause less ground damage, and are better for paved surfaces. Steel tracks are more durable, work better in extreme cold, and grip better on ice. Rubber tracks cost more to replace but are standard on most rental machines.
Do I need a special license to operate a track loader on public roads?
Most states do not require a special license, but you may need a commercial driver's license if the machine weighs over a certain threshold (usually 26,000 pounds). Check with your state's Department of Motor Vehicles. Transporting a track loader on a trailer is common and usually does not require special permits unless the load exceeds width or length limits.
Can I rent a track loader for just a few hours?
Most rental yards have a four-hour minimum or charge a half-day rate. A few yards offer hourly rates, but this is uncommon. Call ahead to ask about short-term rental options in your area.