The Bobcat MT100 is a compact tracked machine designed for landscaping, construction, and property maintenance work
The Bobcat MT100 is a mini track loader—a small, rubber-tracked vehicle that moves materials and performs grading work on sites where a full-size machine would be too large or would damage the ground. It weighs about 4,200 pounds, fits through a standard gate, and can climb slopes that would stop a wheeled loader. The tracks spread its weight across soft ground, which means it can work on lawns, in gardens, and on muddy sites without leaving deep ruts or tearing up the surface.
This machine is not a piece of equipment most homeowners own. It is a rental tool for specific jobs: moving mulch or gravel around a landscape project, grading a sloped yard before seeding, clearing debris after a storm, or preparing ground for a patio or deck. Contractors and landscapers use them regularly. If you are thinking about renting one for a weekend project, understanding what it actually does and what it costs to operate will help you decide whether it is the right tool or whether a simpler approach makes more sense.
Key Takeaways
- The MT100 is a tracked loader that weighs about 4,200 pounds and is designed to move materials and grade ground without damaging lawns or soft soil.
- Rental costs vary by region and rental duration, but expect to pay a daily rate plus delivery fees if the rental company does not have a location near you.
- Operating the MT100 requires basic training on controls and safety, and most rental companies provide a brief walkthrough before you take the machine.
- The machine uses a small bucket or attachment to move loose materials like mulch, gravel, or topsoil, and can push or spread material across a work area.
- Fuel consumption and maintenance during a short rental are minimal concerns, but you are responsible for returning the machine clean and undamaged.
What the MT100's bucket and tracks actually do
The MT100 has a small front bucket, usually 6 to 8 cubic feet in capacity, and rubber tracks instead of wheels. The bucket lifts and lowers hydraulically, and the tracks are powered independently so you can steer by running one track faster than the other—this is called skid steering. The result is a machine that can turn in place, climb steep slopes, and work in tight spaces where a regular loader cannot fit.
The tracks are the key difference from a wheeled loader. Because the weight is spread across a wider area, the ground pressure is lower. On a lawn or soft ground, this means less compaction and fewer visible ruts. On muddy or wet sites, the tracks grip better than wheels would. The trade-off is that tracks are slower than wheels and require more fuel to move the same distance, but for short work distances on a single property, this does not matter much.
The bucket is small enough to fit through a standard gate opening, which is why contractors use the MT100 for backyard work. You can load mulch, gravel, topsoil, or debris into the bucket and move it to where you need it. You can also use the bucket to grade a slope, push material into piles, or clear fallen branches and small rocks from a work area. Some rental companies offer attachment options—a grapple for grabbing branches, a spreader for distributing mulch evenly, or a snow blade for winter work.
Rental costs and what they include
Rental rates for the MT100 vary by location and rental company. A daily rate typically ranges from $75 to $150, depending on your region and the rental company's pricing model. Weekly rates are usually cheaper per day—often 3 to 4 times the daily rate for a full week. Delivery fees, if the rental company does not have a location near you, can add $100 to $300 or more to the total cost.
Most rental agreements include basic fuel and routine maintenance during the rental period. You are responsible for returning the machine with a full tank of fuel, or you will be charged a refueling fee. You are also responsible for any damage beyond normal wear—if you crack a track, bend the bucket, or damage the hydraulic lines, the rental company will charge you for repairs. Before you rent, ask what the damage waiver covers and whether it is worth the extra cost for your project.
Delivery is often the hidden cost. If the rental company has a location within a few miles of your property, they may deliver for free or for a small fee. If you are farther out, delivery can cost as much as a day's rental. Some people choose to pick up and return the machine themselves to save money, but you will need a trailer rated for at least 5,000 pounds and a vehicle with enough towing capacity.
How to operate the MT100 safely and what training looks like
The MT100 is not complicated to operate, but it is not a lawn mower either. Most rental companies require you to watch a brief safety video and sign a waiver before you take the machine. The walkthrough usually covers how to start the engine, how to use the joystick controls for the bucket, how to steer using the track controls, and how to shut down safely. This takes 15 to 30 minutes.
The controls are intuitive once you understand them. A joystick on the right side of the operator's seat lifts and lowers the bucket. Two levers or pedals control the tracks—push one forward to move that track forward, pull it back to reverse it. To turn left, you slow or reverse the left track while keeping the right track moving forward. Steering takes practice, but most people get comfortable with it within the first 10 or 15 minutes of operation.
Safety comes down to three things: keeping bystanders away from the work area, watching for obstacles like rocks or roots that could tip the machine, and not overloading the bucket. The MT100 is stable on flat ground, but on slopes or uneven terrain, overloading can shift the center of gravity and cause a tip. The rental company will tell you the maximum bucket load—follow it. Wear eye protection and work gloves, and never reach under the bucket or into the work area while the engine is running.
When the MT100 makes sense versus other options
The MT100 is the right tool if you have a specific job that requires moving material across soft ground or grading a slope without damaging the surrounding area. Examples include spreading mulch around a large landscaping project, moving topsoil to level a yard before seeding, clearing debris after a storm, or preparing ground for a patio or deck installation. If the job is small enough to do with a wheelbarrow and shovel, renting a machine does not make financial sense.
If you need to move material on a paved driveway or concrete pad, a wheeled skid steer loader (like a Bobcat S570) is faster and cheaper to rent. If you are doing heavy demolition or moving large rocks and stumps, you might need a larger tracked loader. If you are spreading gravel or mulch over a large area and do not care about compaction, a dump truck and manual labor might be the most cost-effective approach. Think about the total cost—rental plus delivery plus your time—and compare it to hiring a landscaper to do the work.
Fuel consumption and maintenance during a rental period
The MT100 uses a small diesel or gasoline engine, depending on the model year. Fuel consumption is roughly 1 to 2 gallons per hour of operation, depending on how hard you are working the machine. For a weekend project, you will likely use 5 to 10 gallons of fuel total. The rental company includes fuel in the rental cost, but you are responsible for returning the machine with a full tank.
Maintenance during a short rental is minimal. Check the oil level before you start work each day—the rental company will show you how. Keep an eye on the hydraulic fluid level if you are using attachments, but for basic bucket work, this is not usually necessary. If you hear unusual noises, see fluid leaking, or notice the bucket moving slowly, stop and call the rental company. Do not try to fix anything yourself.
When you return the machine, the rental company will inspect it for damage and cleanliness. Wash off mud and debris before you return it—most rental companies charge a cleaning fee if the machine is excessively dirty. This is a standard practice and protects the next renter and the equipment.
Frequently Asked Questions
Can I rent an MT100 for just a few hours?
Most rental companies have a minimum rental period of one day, though some offer half-day rates at 60 to 70 percent of the full daily rate. Call ahead to ask about half-day availability, as it depends on the rental company's schedule and whether they have another reservation that day.
Do I need a special license to operate the MT100?
No. The MT100 is not a commercial vehicle and does not require a special license. You do need to be at least 18 years old and able to follow safety instructions. The rental company will verify your age and have you sign a liability waiver.
What happens if I get stuck or break down during the rental?
Call the rental company when ready. Most companies include roadside support in the rental agreement and will send a technician or recovery vehicle to help you. Do not try to tow the machine yourself or operate it if something feels wrong. Damage caused by operating a broken machine will be your responsibility.
Can the MT100 work on a steep slope?
Yes, the MT100 can climb slopes up to about 35 degrees, which is steeper than most wheeled loaders. However, do not operate it on slopes steeper than the manufacturer recommends, and always work perpendicular to the slope—never up and down. Steep slopes increase the risk of tipping, especially if the bucket is loaded.
What is the difference between the MT100 and a larger Bobcat track loader?
The MT100 is the smallest in Bobcat's track loader line. Larger models like the MT52 or MT55 weigh more, have bigger buckets, and can handle heavier work, but they do not fit through a standard gate and cause more ground compaction. Choose the MT100 for tight spaces and soft ground; choose a larger model if you need to move more material or work on harder surfaces.