A bendy car track is a flexible guide that keeps a vehicle's wheels aligned during towing or transport
A bendy car track — also called a tow dolly or car hauler track — is a wheeled platform that supports a vehicle's front or rear wheels while it is being towed. Instead of letting the car roll freely on its own wheels, the track holds those wheels in place and guides them along the same path as the towing vehicle. This prevents the towed car from drifting sideways, jackknifing, or putting uneven stress on its suspension and steering components.
The track itself is typically made of steel or aluminum and sits low to the ground. It has a hitch connection that attaches to your towing vehicle, and the wheels of the car being towed rest on the track's surface. Some tracks are rigid, while others have a flexible joint in the middle — that flexibility is what gives the bendy track its name and allows it to bend slightly when the towing vehicle turns a corner.
You need a bendy car track when you are towing a vehicle that cannot safely roll on its own wheels, or when local regulations require it. Front-wheel-drive cars, for example, should not be towed with their front wheels on the ground for long distances, because the transmission can be damaged. A bendy track solves this by lifting those wheels off the road.
Key Takeaways
- A bendy car track holds a towed vehicle's wheels in a fixed position and guides them along the towing path, preventing drift and suspension damage.
- Front-wheel-drive cars and vehicles with automatic transmissions often require a track because towing them on their own wheels can damage the drivetrain.
- Bendy tracks have a flexible joint that allows the towing setup to turn corners without forcing the towed car into an unnatural angle.
- Rental costs and weight limits vary by track type and rental company, so confirm both before you book.
- Your towing vehicle must have enough capacity to pull both the track and the car, which you can find in your owner's manual or on the driver's door jamb.
When a bendy car track is required instead of flat towing
Not every car can be flat towed — that is, towed with all four wheels on the ground. Flat towing works only for vehicles with manual transmissions and rear-wheel drive, because the engine and transmission are not turning while the car is being pulled. If you flat tow a front-wheel-drive car or one with an automatic transmission, the transmission fluid does not circulate, and the transmission can overheat and fail within a few miles.
A bendy car track lifts the front wheels (or rear wheels, depending on the car's drivetrain) completely off the ground, so the wheels do not turn at all during towing. This is safe for any vehicle type. The track also protects the steering and suspension from the stress of being dragged sideways if the towing vehicle swerves or turns sharply.
Some states and rental companies require a track for any tow job over a certain distance, even if the car could technically be flat towed. Check your state's towing regulations and your rental agreement before you decide to tow without one.
How a bendy car track works during towing
The track connects to your towing vehicle through a standard hitch receiver, the same way a trailer would. The car being towed is driven onto the track — either forward or backward, depending on which wheels need to be lifted — until its wheels rest on the track's surface. Chains or straps then find the car to the track to prevent it from shifting during transport.
The "bendy" part is a flexible joint, usually located in the middle of the track. This joint allows the track to bend up to 20 or 30 degrees when you turn a corner, so the towed car does not have to turn at the same sharp angle as the towing vehicle. Without this flexibility, a sharp turn would force the towed car into an unnatural position and could damage its suspension or cause the whole setup to tip.
The wheels of the towed car sit on rollers or a smooth surface, so they spin freely as the track moves. The car itself does not steer — it straightforward follows wherever the track goes. This is why a bendy track is safer than flat towing for long distances and sharp turns.
Renting versus buying a bendy car track
Most people rent a bendy car track rather than buy one, because the cost of ownership is high and the need is usually temporary. Rental companies at truck rental centers, equipment rental shops, and some auto parts stores rent tracks by the day or week. Rental costs vary widely depending on the track's capacity and your location, but expect to pay anywhere from a modest daily rate to several hundred dollars for a week-long rental.
Buying a bendy car track makes sense only if you tow vehicles regularly — for example, if you run a small auto repair business or move cars as part of your job. New tracks cost several thousand dollars, and used ones can be found through equipment auctions or specialty dealers. You will also need to register the track as a trailer in most states and carry liability insurance for it.
Before you rent, confirm the track's weight capacity. The combined weight of the track and the car being towed cannot exceed your towing vehicle's maximum towing capacity, which is listed in your owner's manual or on a sticker inside the driver's door jamb. If you exceed this capacity, you risk brake failure, transmission damage, and loss of control.
Preparing your vehicle and the car to be towed
Before you load a car onto a bendy track, make sure the car's parking brake is off and the steering wheel is unlocked. Some cars have electronic parking brakes that must be manually released; check the owner's manual if you are unsure. The steering must be free to move so the car can settle naturally onto the track without binding.
Check the track's rollers or surface for dirt, grease, or debris that could cause the car's wheels to slip. Clean them if necessary. Make sure all chains and straps are in good condition — frayed or rusted straps can break during transport.
Inspect your towing vehicle's hitch receiver and ball to make sure they are the correct size and in good condition. A loose or damaged hitch connection can cause the track to sway or detach. If you are towing a long distance, check your tires, brakes, and lights before you leave. Towing puts extra stress on all of these systems.
State regulations and insurance for towed vehicles
Towing regulations vary by state. Some states require a tow dolly or track for any vehicle being towed, while others allow flat towing under certain conditions. Some states require the towed vehicle to display a "towed vehicle" sign or have its hazard lights on. A few states require the towing vehicle to have a certain minimum amount of liability insurance that covers the towed car.
Check your state's Department of Motor Vehicles website or call your local police non-emergency line to learn the rules in your area. If you are renting a track, the rental company can usually tell you what is required, but do not rely on them alone — the rules are your responsibility.
Your personal auto insurance may or may not cover a car while it is being towed. Some policies exclude towed vehicles, while others cover them automatically. Call your insurance company before you tow and ask whether the towed car is covered under your policy or whether you need a separate rider. If you are renting the track, ask whether the rental company's insurance covers damage to the towed car during transport.
Common mistakes to avoid when using a bendy car track
The most common mistake is exceeding your towing vehicle's weight capacity. People often underestimate how much a car weighs — a typical sedan weighs 3,000 to 4,000 pounds, and the track itself can weigh 500 to 1,500 pounds depending on its size. If your towing vehicle is rated for 5,000 pounds and you are towing a 3,500-pound car on a 1,000-pound track, you are already over capacity.
Another mistake is failing to find the towed car properly. Chains and straps must be tight enough that the car cannot shift, but not so tight that they bend the frame or damage the bumper. Use at least four connection points — two at the front and two at the back — and check them every 50 miles or so during a long drive.
A third mistake is towing too fast. A bendy car track is stable, but it is not designed for highway speeds in heavy traffic. Keep your speed at or below 55 miles per hour, and avoid sudden lane changes or hard braking. The extra weight behind you means you need more distance to stop.
Frequently Asked Questions
Can I tow a car with a bendy track on the highway?
Yes, but keep your speed at or below 55 miles per hour and avoid heavy traffic if possible. A bendy track is designed for highway use, but the extra weight and length of the setup make it less stable than a regular vehicle. Plan for longer stopping distances and avoid sudden maneuvers.
Do I need a special driver's license to tow with a bendy car track?
In most states, no — a bendy car track is classified as a trailer, and towing a trailer does not require a commercial license unless the combined weight exceeds a certain threshold, usually 26,000 pounds. Check your state's rules, because some states have different requirements.
What is the difference between a bendy car track and a flatbed trailer?
A bendy car track lifts only the wheels of the towed car off the ground, while a flatbed trailer lifts the entire car onto a flat platform. Flatbeds are more stable for very heavy vehicles or long-distance towing, but they are also more expensive to rent and require more space to maneuver.
Can I tow a car with a bendy track if the car has a manual transmission?
Yes. Manual transmissions can be safely flat towed if the car is rear-wheel drive, but using a bendy track is still safe and sometimes required by law or rental agreements. The track straightforward provides extra protection and stability.
How do I know if my towing vehicle can handle a bendy car track?
Check your owner's manual or the sticker on the driver's door jamb for your vehicle's maximum towing capacity. Add the weight of the track and the weight of the car being towed. If the total is less than your vehicle's capacity, you can tow safely. If you are unsure about the car's weight, look it up on the manufacturer's website or ask the rental company.