What an aviation mechanic apprenticeship actually is
An aviation mechanic apprenticeship is a paid, on-the-job training program where you work alongside experienced mechanics while learning to maintain and repair aircraft. Unlike a classroom-only program, you earn a wage from day one, typically starting between $16 and $22 per hour depending on the employer and region, and the pay increases as you progress. You spend most of your time in hangars and maintenance facilities working on real aircraft—learning to inspect engines, hydraulic systems, avionics, and structural components—while attending related classroom instruction, usually one or two days per week at a community college or trade school.
The apprenticeship typically lasts three to four years and ends with an Airframe and Powerplant (A&P) certificate from the Federal Aviation Administration (FAA). This certificate is what employers actually hire you for; without it, you cannot legally sign off on aircraft maintenance work. The apprenticeship is the most direct path to that certificate because it combines the required flight-hour experience with structured training, and you do not have to pay tuition out of pocket the way you would at a four-year aviation maintenance technician program.
Key Takeaways
- Aviation mechanic apprenticeships are paid positions lasting three to four years that combine on-the-job training with classroom instruction leading to an FAA A&P certificate.
- You must complete a minimum of 1,900 hours of hands-on aircraft maintenance work and pass both written and practical FAA exams to earn your certificate.
- Apprenticeships are offered by airlines, aircraft maintenance facilities, the military, and some manufacturers, each with different hiring timelines and training focuses.
- The FAA requires that your training covers both airframe systems (structure, hydraulics, pneumatics) and powerplant systems (engines, fuel systems, ignition), whether through a single program or two separate ones.
- Military apprenticeships offer the fastest path to certification and include housing and benefits, but come with a service commitment of four to six years after training ends.
The FAA requirements you must meet
The FAA does not run apprenticeships directly, but it sets the standards every program must follow. To earn your A&P certificate, you need a minimum of 1,900 hours of documented hands-on experience working on aircraft, plus classroom instruction in specific technical areas. Those hours must cover both airframe work (fuselage, wings, landing gear, hydraulic and pneumatic systems) and powerplant work (engines, fuel systems, ignition systems, engine controls). Some apprenticeships teach both in one program; others split them into separate tracks, which means you would complete one apprenticeship, earn a certificate, then enroll in a second one.
After you finish your apprenticeship hours and classroom work, you must pass three FAA exams: a written knowledge test, an oral exam where an FAA inspector questions you on technical concepts, and a practical exam where you actually perform maintenance tasks on an aircraft. The exams are administered by designated FAA testing centers, and you schedule them yourself once your employer or training program confirms you have completed the required hours. Failure on any exam means you can retake it, but there is a waiting period and additional fees.
Your apprenticeship program must be registered with your state's apprenticeship office or with the FAA directly. This registration ensures the program meets federal standards and that your hours will count toward certification. When you are job hunting, ask the employer whether their program is registered; if it is not, the hours you log there will not count toward your A&P certificate, even if you do the work correctly.
Where to find and enter an apprenticeship
Aviation mechanic apprenticeships are offered by airlines (United, Delta, Southwest, regional carriers), aircraft maintenance facilities (independent shops that service planes for multiple operators), military branches (Air Force, Navy, Army, Coast Guard), aircraft manufacturers (Boeing, Airbus, Bombardier), and some flight schools. Each source has different hiring windows, training quality, and what happens after you finish.
Airlines typically hire apprentices once or twice per year and may require you to live near a major hub where they base their maintenance operations. The process process usually includes a written test covering basic math and reading, a background check, and an interview. You can find current openings on the careers page of each airline's website. Regional carriers and independent maintenance shops hire more frequently and may be more flexible about location, but they often have less formal training structure and fewer advancement opportunities after you earn your certificate.
Military apprenticeships (called Apprenticeship Programs in the Air Force and similar names in other branches) are the fastest route to certification because the military has the infrastructure and funding to move you through training quickly—often in two to three years instead of four. You enlist, complete basic training, then enter the aircraft maintenance specialty. The catch is that you commit to four to six years of active duty after your training ends, and you are stationed wherever the military assigns you. Military apprenticeships also include housing, food, medical care, and a monthly stipend, so there is no tuition cost and no living expenses to cover.
To find military apprenticeships, contact a recruiter for the branch you are interested in. They can tell you whether the aircraft maintenance specialty is currently open for enlistment and what the timeline looks like. Civilian apprenticeships can be found through the U.S. Department of Labor's ApprenticeshipUSA website (apprenticeship.gov), which lists registered programs by state and employer. You can also contact maintenance facilities directly and ask whether they have an active apprenticeship program.
What the training actually covers, month by month
The first few months of most apprenticeships focus on safety and basic tools. You learn how to use a multimeter, torque wrench, and rigging equipment; how to read technical drawings and maintenance manuals; and the safety protocols specific to aircraft maintenance (working around jet engines, high-pressure hydraulic systems, and hazardous materials). You shadow experienced mechanics and perform straightforward tasks under supervision—cleaning parts, organizing tools, assisting with inspections.
By month four or five, you begin hands-on work on actual aircraft systems. In airframe training, you might work on landing gear retraction systems, inspect wing structures for cracks, or replace hydraulic hoses. In powerplant training, you disassemble and inspect engines, replace spark plugs, and test fuel system components. The classroom instruction runs parallel to this work and covers the theory behind what you are doing—how a hydraulic system works, why metal fatigue matters, what the maintenance manual requires at each inspection interval.
As you move into year two and three, you work on more complex systems with less direct supervision. You might troubleshoot an avionics problem, perform a 100-hour inspection on a small aircraft, or rebuild an engine component. Your classroom work shifts toward more specialized topics: advanced electrical systems, composite repair, pressurization systems. By the final year, you are working on major maintenance events—the kind that ground an aircraft for days—and your instructor is checking your work rather than guiding every step.
How much you earn and what it costs you
Apprentices typically earn between $16 and $22 per hour in the first year, depending on the employer and region. This wage increases annually, usually by $1 to $3 per hour, so by year three or four you might be earning $22 to $28 per hour. These are gross wages before taxes; your actual take-home pay is lower. Some employers offer benefits like health insurance and a 401(k) match, though this varies widely.
The tuition cost to you is usually zero. The employer or the program pays for your classroom instruction at the community college or trade school. You may have to buy your own tools—a basic set of hand tools costs $300 to $800—and some programs require you to purchase safety equipment like steel-toed boots and a hard hat, which runs another $100 to $200. A few programs charge a small registration fee ($50 to $200) to cover administrative costs, but this is uncommon.
The real cost is opportunity cost: you are earning an apprentice wage instead of a higher wage you might make in another field, and you are working full-time while attending classes, which limits your ability to take on other work or pursue other education. Over a four-year apprenticeship, this adds up, but once you earn your A&P certificate, entry-level mechanic positions pay $28 to $35 per hour, and experienced mechanics at major airlines earn $45 to $65 per hour, so the long-term earning potential is strong.
Military versus civilian apprenticeships: what changes
Military apprenticeships move faster because the military controls the entire pipeline—you are not waiting for a classroom to fill up or for an instructor to become available. Training typically takes two to three years instead of four, and you earn your A&P certificate on the same timeline. You also have no tuition, no tool costs, and no living expenses; the military provides housing, food, and a monthly stipend. If you have financial constraints or need to start earning when ready, military training removes those barriers.
The trade-off is that you are committed to active duty for four to six years after your training ends. You cannot quit, you cannot choose your location, and you are subject to military discipline and deployment. If you are injured or become ill, military medical care is provided, but your career path is determined by military staffing needs, not by your preferences. After your service commitment ends, you can take your A&P certificate to any civilian employer, and many airlines actively hire veterans because they know the training is rigorous and the work ethic is proven.
Civilian apprenticeships offer more flexibility. You can change employers (though this may interrupt your training), you can live where you choose, and you can leave if the work is not for you. However, you are responsible for your own living expenses, and if your employer's program is poorly run or understaffed, your training may take longer or be less thorough. The quality of civilian apprenticeships varies significantly by employer; a major airline's program is usually well-structured and well-funded, while a small independent shop may have less formal instruction and fewer resources.
What happens after you earn your A&P certificate
Once you pass your final FAA exam and receive your certificate, you are a licensed aircraft mechanic. Your employer may offer you a full-time position as a mechanic, or you may need to job hunt. Most apprentices stay with their training employer for at least a year or two because the employer has invested in your training and often has a retention bonus or agreement in place. After that, you can move to any airline, maintenance facility, manufacturer, or government agency that hires mechanics.
Entry-level mechanics typically earn $28 to $35 per hour at regional carriers and independent shops, and $32 to $42 per hour at major airlines, depending on the region and the employer's union contract. Wages increase with seniority and specialization. A mechanic who specializes in avionics or composite repair can earn more than a general mechanic. After 10 to 15 years, experienced mechanics at major airlines often earn $50 to $65 per hour, plus overtime and benefits.
Some mechanics pursue additional certifications after earning their A&P—for example, an Inspection Authorization (IA), which allows you to sign off on major inspections and repairs without a supervisor's approval. An IA requires at least 3,000 hours of experience as an A&P mechanic and passing an additional FAA exam. Others move into supervisory roles, quality assurance, or training positions. The A&P certificate is your foundation; what you do with it depends on your interests and the opportunities available at your employer.
Frequently Asked Questions
Do I need a high school diploma to enter an apprenticeship?
Most employers require a high school diploma or GED, and some require a score of at least 50th percentile on the ASVAB (Armed Services Vocational Aptitude Battery) or a similar test. A few programs accept applicants without a diploma if they pass a basic math and reading assessment, but this is rare. If you do not have a diploma, contact the program directly to ask about their requirements.
Can I do an apprenticeship part-time while working another job?
No. Aviation mechanic apprenticeships are full-time positions—you work 40 hours per week on the aircraft and attend classroom instruction on top of that. The combination of work and school leaves little time for another job. Military apprenticeships are also full-time and include a service commitment, so a second job is not an option.
What if I fail one of the FAA exams?
You can retake any failed exam after a waiting period (usually 30 days for the written test). You pay a retesting fee each time, which varies by testing center but is typically $150 to $300 per exam. Your employer may or may not pay this fee; ask before you fail. Most people pass on the second attempt if they study the areas where they struggled the first time.
Will my apprenticeship hours count if I switch employers?
Yes, as long as both employers' programs are registered with the FAA or your state apprenticeship office and the hours are documented. When you leave an employer, ask for a transcript of your hours signed by a supervisor. When you start at a new employer, provide this transcript so the new program can add your hours to their records. If you switch to an unregistered program, those hours will not count toward your A&P certificate.
Can I earn my A&P certificate without doing an apprenticeship?
Yes. You can attend a full-time aviation maintenance technician program at a community college or trade school, which typically takes 18 to 24 months and costs $15,000 to $40,000 in tuition. You earn no wage during this time and pay tuition out of pocket. After graduation, you still need to pass the same three FAA exams as an apprentice. The apprenticeship route is usually faster and cheaper because you earn while you learn, but the classroom-only route is faster if you can afford the tuition and do not need to earn income.