Where to get your car key copied
You can get a car key copied at a locksmith, a car dealership, or some hardware stores and big-box retailers. Each option has different costs, timelines, and limitations depending on your car's year, make, and whether your key has a chip inside it.
A locksmith is often the fastest and cheapest choice for older cars with standard keys. Many locksmiths can cut a key while you wait, sometimes in 15 minutes. For newer cars with transponder keys (keys that communicate with your car's computer), a locksmith can usually handle it, though some may charge more or need your vehicle identification number (VIN) to program the key.
Your car dealership can copy any key for your vehicle, including high-security keys and smart keys that unlock and start your car remotely. The dealership has your car's records and can verify ownership before making a copy. Dealership key copying is more expensive than a locksmith and usually takes longer, sometimes requiring an appointment.
Some hardware stores and retailers like Walmart or Home Depot offer key cutting services, but they typically work only on older, non-electronic keys. They cannot program transponder keys or smart keys.
Key Takeaways
- Locksmiths are usually the fastest and cheapest option for standard keys and many transponder keys.
- Dealerships can copy any key type for your vehicle but cost more and may require an appointment.
- Hardware stores can cut basic keys but cannot program electronic keys that communicate with your car.
- Bring your VIN, proof of ownership, or a photo of your key to speed up the process at any location.
- Transponder and smart keys cost more to copy than standard keys because they require programming.
Standard keys versus transponder and smart keys
A standard key is a flat metal key with no electronics. It opens your car door and turns the ignition. Copying a standard key is straightforward: the locksmith or hardware store cuts a blank key to match the original. This takes minutes and costs between $5 and $15.
A transponder key has a small chip inside the plastic head that sends a radio signal to your car's computer. If the chip does not match, the engine will not start. Most cars made after 1995 use transponder keys. Copying a transponder key requires cutting the key blank and then programming the chip to your car. This costs between $50 and $200 depending on your car and who does the work. A locksmith can usually do this, but some may need your VIN or proof of ownership.
A smart key (also called a key fob or proximity key) unlocks and starts your car when it is in your pocket or bag. Smart keys are the most expensive to copy because they require specialized equipment and programming. Dealerships are usually the only option for smart keys, and the cost ranges widely depending on your car's make and model. Some dealerships charge $200 to $500 or more for a smart key.
What information and documents you may need
Bring your vehicle identification number (VIN) if possible. The VIN is a 17-character code stamped on your dashboard (visible through the windshield on the driver's side) and printed on your registration and insurance documents. A locksmith or dealership can use your VIN to confirm your car's key type and programming requirements.
Bring proof of ownership such as your registration, title, or insurance card. Dealerships almost always ask for this before copying a key. Many locksmiths will ask as well, especially for transponder or smart keys. This protects against copying keys for stolen vehicles.
If you have your original key, bring it with you. If you do not, bring a photo of the key if you have one, or straightforward tell the locksmith or dealership what type of key you need. Some locksmiths can look up key codes by VIN without seeing the original key.
Cost differences by location and key type
Standard key copying at a hardware store costs $5 to $15 and takes a few minutes. A locksmith charges $10 to $30 for a standard key. A dealership charges $20 to $50 for a standard key but may require an appointment.
Transponder key copying at a locksmith costs $50 to $150 and usually takes 30 minutes to an hour. A dealership charges $100 to $200 for a transponder key and may take a day or longer. The exact cost depends on your car's make and model; luxury and newer vehicles cost more.
Smart key copying is available mainly through dealerships and costs $200 to $500 or more. Some independent locksmiths who specialize in high-end vehicles can program smart keys, but they are less common and may charge similarly to dealerships.
How to find a trustworthy locksmith
Check online reviews on Google, Yelp, or the Better Business Bureau. Look for locksmiths with consistent ratings and recent reviews. Avoid locksmiths with many complaints about surprise charges or poor quality work.
Call ahead and ask for a quote before the locksmith arrives. A reputable locksmith will give you a price range over the phone based on your key type. Be wary of locksmiths who refuse to quote a price or quote a price much lower than others—this sometimes signals a bait-and-switch where the final bill is much higher.
Verify that the locksmith is licensed in your state. Requirements vary by state; some require locksmiths to be licensed and bonded, while others do not. Ask the locksmith for their license number and check it with your state's licensing board if one exists.
What to do if you have lost both keys
If you have lost all your car keys, you will need to contact your dealership or a locksmith who can make a key from your VIN alone. Bring your proof of ownership (registration, title, or insurance card) and a photo ID. The dealership or locksmith will verify that you own the car before proceeding.
This process takes longer than copying an existing key because the locksmith or dealership must look up your car's key code by VIN and then cut and program a new key from scratch. Expect to pay more than a standard key copy—usually $100 to $300 depending on your car and whether the key is a transponder or smart key.
Some dealerships require you to show the title or registration in your name before they will make a key. If your registration is not in your name or you do not have it with you, call ahead to ask what documents the dealership needs.
Frequently Asked Questions
Can a locksmith copy a smart key?
Some locksmiths can program smart keys, but many cannot. Call ahead and ask whether the locksmith has the equipment to program smart keys for your specific car make and model. Dealerships are the most reliable option for smart keys, though they cost more.
How long does it take to copy a car key?
Standard keys take 5 to 15 minutes at a hardware store or locksmith. Transponder keys take 30 minutes to an hour because they must be cut and programmed. Smart keys may take a day or longer at a dealership, especially if an appointment is needed.
Do I need my original key to get a copy made?
No. A locksmith or dealership can make a key using your VIN alone, though you will need proof of ownership. If you have your original key, bring it to speed up the process.
What if the locksmith or dealership cannot program my key?
If a locksmith cannot program your key type, they will tell you upfront. Ask them to recommend another locksmith or the dealership. Do not pay for a key that has not been tested and confirmed to work in your car before you leave.
Is it cheaper to copy a key at a dealership or a locksmith?
Locksmiths are usually cheaper for standard and transponder keys. Dealerships are often the only option for smart keys and may be your only choice for very new or luxury vehicles. Call both and compare prices before deciding.