What remote start does and what it costs to install
A remote start system lets you start your engine from outside the vehicle using a key fob or smartphone app, usually from 100 to 1,000 feet away depending on the system. The installer runs wiring from your battery through the steering column to your ignition switch, then connects a control module that interprets the remote signal and triggers the starter. Installation typically costs between $300 and $1,500 depending on your vehicle's make, model, and the system's features.
The price varies because some vehicles have more complex electrical systems that take longer to integrate with the remote start module. Luxury cars, trucks with push-button ignition, and vehicles with security systems that resist aftermarket modification cost more to install. A basic system on a 2010 Honda Civic might run $400, while the same work on a 2022 BMW could exceed $1,200.
Remote start is purely optional — your vehicle runs fine without it. But if you live in a cold climate, want to warm your car before driving, or prefer not to fumble with keys in the dark, the convenience may justify the cost. The system does not affect your vehicle's warranty as long as the installer does not damage existing wiring.
Key Takeaways
- Remote start wiring connects to your battery, ignition switch, and steering column, with a control module that reads the remote signal and triggers the starter.
- Installation costs range from $300 to $1,500 depending on your vehicle's electrical complexity and the system features you choose.
- Aftermarket systems work on most vehicles, but push-button ignition cars and luxury models often require custom integration that costs more.
- A professional installer should verify that the system will not conflict with your vehicle's security system or immobilizer before starting work.
- Remote start does not void your manufacturer warranty if the installer avoids damaging existing wiring and components.
How the installer connects the system to your vehicle
The installer begins by removing panels from under your steering wheel to access the ignition switch wiring. They identify which wires control the battery, accessories, ignition, and starter — usually by consulting the vehicle's wiring diagram or a database specific to your year and model. The remote start module then splices into these wires so that when you press the remote button, the module mimics the action of turning your key.
The installer also connects a relay to your starter motor so the module can trigger it without you being in the vehicle. They run the main power wire from the battery through the firewall and down to the module, usually mounted under the dash or behind a kick panel. A ground wire connects the module to the vehicle's frame to complete the circuit.
For vehicles with push-button ignition, the process is more involved because there is no traditional ignition switch to splice into. The installer must integrate the module with the vehicle's computer system, which often requires a bypass module that tricks the car into thinking the key fob is present. This step is why push-button cars cost significantly more to install.
Choosing between OEM and aftermarket systems
Some manufacturers offer OEM (original equipment manufacturer) remote start as a factory option or dealer-installed upgrade. Lexus, BMW, and Ford offer their own systems, which integrate seamlessly with the vehicle's existing computer and security features. OEM installation is usually more expensive — often $500 to $1,000 — but the system is designed specifically for your vehicle and carries the manufacturer's support.
Aftermarket systems like Viper, Compustar, and Avital are sold by independent installers and work on a wider range of vehicles. They are usually cheaper upfront, but quality varies between brands and installers. A reputable installer will test the system thoroughly before handing over the keys and will stand behind the work if something fails within the first year.
Ask your installer whether the system includes a bypass module for your vehicle's immobilizer — a security feature that prevents the engine from starting without the correct key fob signal. Without a proper bypass, the remote start may not work at all, or it may work intermittently. The installer should know this before quoting you a price.
What to check before you commit to installation
Before scheduling installation, confirm that the installer has experience with your specific vehicle. A shop that specializes in your brand — say, a Subaru dealer or a shop that focuses on Toyota trucks — will have the right wiring diagrams and bypass modules on hand. Asking "Have you installed remote start on a 2019 Subaru Outback?" is a better question than "Do you do remote start?"
Verify that the system includes a kill switch or security feature that prevents someone from starting your vehicle remotely if they steal your key fob. Most modern systems require you to press a button sequence on the fob or use a PIN code in the app before the engine will turn over. Ask the installer to explain how the system prevents unauthorized starts.
Check whether the system will work with your vehicle's existing security system. Some alarms and immobilizers actively resist aftermarket remote start, and forcing integration can cause the alarm to trigger randomly or the engine to shut off after a few seconds. The installer should test this before completing the job, not after you drive away.
Installation timeline and what happens during the work
A straightforward remote start installation typically takes 2 to 4 hours. The installer removes interior panels, traces and splices wiring, mounts the control module, tests all connections, and programs the remote fob. More complex vehicles — especially those with push-button ignition or advanced security systems — may take 6 to 8 hours or require a second appointment.
Ask the installer upfront whether they will need to keep your vehicle overnight. Some shops prefer to install and test remote start over a full day rather than rushing through it in a single afternoon. If they do keep it overnight, confirm that they have a find lot and that your vehicle will be locked and protected.
Before you leave, the installer should demonstrate the remote start function in person. Have them show you how to use the fob, what the LED indicators mean, and what to do if the system fails to start the engine. Ask for written instructions or a video walkthrough if the system is complex.
Maintenance and troubleshooting after installation
Remote start systems require almost no ongoing maintenance. The wiring is protected inside your vehicle, and the module is sealed against moisture. The only regular task is replacing the battery in your remote fob when it dies — usually every 1 to 2 years depending on how often you use it.
If the remote start stops working, the problem is usually a dead fob battery, a blown fuse, or a loose wire connection. Check the fuse box under your dashboard or hood — the installer should have labeled the remote start fuse. If the fuse is blown, replace it with one of the same amperage. If a new fuse blows when ready, stop and contact the installer rather than trying to diagnose the electrical problem yourself.
If the engine starts but shuts off after a few seconds, the immobilizer may be rejecting the remote start signal. This sometimes happens after a software update to your vehicle's computer. Contact the installer or the system manufacturer — they may need to reprogram the bypass module or update the system's firmware.
When remote start may not be practical
Remote start works best on vehicles with traditional ignition switches and straightforward electrical systems. Hybrid vehicles, plug-in hybrids, and some newer electric vehicles have complex power management systems that make remote start difficult or impossible to integrate safely. Ask the installer whether remote start is even possible on your vehicle before paying a deposit.
If your vehicle has a manual transmission, remote start will not work — the engine will not turn over unless the clutch is pressed. This is a safety feature to prevent the vehicle from rolling if it is in gear. Automatic and CVT transmissions work fine with remote start because the engine will not engage the wheels unless you shift out of Park.
Vehicles with keyless entry but no push-button ignition are the easiest to retrofit. Older vehicles with straightforward ignition switches are also straightforward. If you own a luxury car with a complex computer system or a recent model with advanced driver-information features, expect higher installation costs and longer lead times.
Frequently Asked Questions
Will remote start drain my battery if I do not use the vehicle for a week?
No. The remote start module draws almost no power when the vehicle is off. The only drain comes from the control module's standby circuit, which uses less than 1 milliamp — roughly the same as a digital clock. You would need to leave the vehicle unused for several months before the battery would discharge noticeably.
Can I install remote start myself, or do I need a professional?
Professional installation is strongly recommended. The work requires splicing into your vehicle's ignition and starter wiring, which can cause electrical fires or permanent damage if done incorrectly. A mistake can also void your vehicle's warranty. Unless you have experience with automotive electrical systems, the cost of professional installation is worth the safety and reliability.
What happens if my vehicle is stolen and the thief has my key fob?
A quality remote start system includes a security bypass that prevents the engine from staying running without the correct key fob present. The engine will start remotely but will shut off after a few seconds unless the driver presses the brake pedal and turns the ignition key — actions a thief cannot perform from outside the vehicle. Ask your installer to confirm this feature before installation.
Does remote start work in extreme cold or heat?
Remote start works in cold weather, which is one of its main uses. In extreme heat, the system works normally, but your vehicle's engine may overheat if left running unattended for too long. Most systems include a timer that shuts the engine off after 10 to 15 minutes if you do not drive the vehicle, preventing overheating and wasting fuel.
Can I add remote start to a vehicle I already own, or is it only available on new cars?
You can add remote start to almost any vehicle you already own through aftermarket installation. The system works on used cars, older vehicles, and vehicles you bought without the factory option. The main limitation is vehicles with push-button ignition and advanced security systems, which cost more to retrofit but are still possible in most cases.