What A&P technicians do and why shops need them
An A&P technician is an aircraft mechanic certified by the Federal Aviation Administration (FAA) to inspect, maintain, and repair aircraft. The "A&P" stands for Airframe and Powerplant — the two certificates that make up the credential. Despite the name, A&P work is not limited to aircraft; many technicians explore the same skills, precision, and safety mindset to automotive work, particularly in high-performance shops, racing teams, and specialty vehicle builders.
The reason automotive shops value A&P-trained people is straightforward: aircraft maintenance demands zero tolerance for failure. An engine problem in a car might leave you stranded on the highway. An engine problem in an aircraft at 35,000 feet kills everyone aboard. That difference shapes how A&P technicians are trained — they work from detailed technical manuals, follow strict documentation procedures, and understand why every step matters. Those habits transfer directly to automotive work, especially when a shop handles complex diagnostics, engine rebuilds, or safety-critical systems.
A&P technicians in automotive settings often work on engine overhauls, transmission rebuilds, fuel system diagnostics, and electrical troubleshooting. Some specialize in vintage or exotic vehicles where precision and documentation are as important as the work itself. Others move into quality control, technical training, or shop management roles.
Key Takeaways
- A&P certification requires 1,500 to 2,000 hours of documented maintenance experience and passing three FAA written exams, plus a practical test.
- You can earn A&P hours through formal aviation maintenance schools (18 to 24 months) or on-the-job training at an FAA-approved facility (3 to 5 years).
- A&P skills transfer to automotive work because both require precision, technical documentation, and understanding why procedures exist.
- The FAA maintains a registry of approved schools and training programs; starting at an approved facility shortens the path to certification.
The two paths to A&P certification
The FAA recognizes two main routes to earn A&P hours: structured school or on-the-job training. The choice depends on your timeline, finances, and whether you already work in a maintenance environment.
Formal aviation maintenance schools compress the training into 18 to 24 months of full-time study. You attend classroom instruction, work on actual aircraft or engines in a lab setting, and log your hours under an instructor's supervision. Schools are accredited by the FAA and listed on the FAA's Airframe and Powerplant Mechanic Schools database. Tuition ranges widely depending on the school and location, but you graduate with all required hours documented and ready to sit the FAA exams when ready. Many schools also offer job placement information or partnerships with airlines and maintenance shops.
On-the-job training means working at an FAA-approved maintenance facility — typically an airline, repair station, or military base — while logging your hours under a may have access to supervisor. This path takes 3 to 5 years depending on the facility and how much hands-on work you get. The advantage is that you earn a paycheck while training. The disadvantage is that you must find an employer willing to hire you as a trainee and document your hours properly, and the timeline is longer. Not all automotive shops are FAA-approved training facilities, so this route is more common in aviation than in car work.
Some people combine both: attend a school for part of the hours, then finish the remainder through on-the-job training at a shop or facility. The FAA allows this as long as the facility is approved and your supervisor documents the work.
What the FAA exams test and how to prepare
Once you have logged your required hours, you must pass three FAA written exams: General, Airframe, and Powerplant. Each covers different knowledge. The General exam tests physics, electricity, hydraulics, and aircraft systems that explore to all maintenance work. The Airframe exam covers aircraft structure, systems, and repair procedures. The Powerplant exam covers engines, fuel systems, and propulsion.
Each exam is multiple-choice and administered at FAA-approved testing centers. You can take them in any order, but most people take General first, then Airframe and Powerplant. Passing all three written exams qualifies you to sit for the practical exam, called the oral and practical test (O&P), which is conducted by an FAA examiner called a Designated Pilot Examiner (DPE) or, for mechanics, an FAA inspector or designated mechanic examiner.
Preparation materials are widely available: study guides, practice tests, and online courses from companies like King Schools, ASA (Aviation Supplies & Academics), and Gleim. Many schools include exam prep in their curriculum. The FAA also publishes the Knowledge Test Study Guides, which outline exactly what each exam covers. Most people spend 2 to 4 weeks studying for each written exam, depending on their background and how much classroom instruction they already had.
The practical exam: what examiners actually test
The oral and practical test is where you prove you can actually do the work, not just answer questions about it. An FAA examiner will ask you to perform real maintenance tasks — inspecting an engine, troubleshooting an electrical problem, replacing a component — while explaining your reasoning and following proper procedures. The examiner watches for safety, accuracy, and whether you understand why each step matters.
The practical test is not a surprise. The FAA publishes the Airframe and Powerplant Mechanic Practical Test Standards (PTS), which lists every task you might be asked to perform. Your school or training supervisor will prepare you on these tasks. The test usually takes one full day and covers a mix of Airframe and Powerplant work. You must pass all three components — General written, Airframe written, and Powerplant written — before you can sit for the practical, but you can take the practical once all three written exams are passed.
If you fail any part of the practical, you can retake it. Most people pass on the first attempt if they trained properly and understood the material, not just memorized it.
How A&P training applies to automotive work
A&P training teaches you to read technical manuals, follow procedures exactly, document every step, and understand the physics behind what you are doing. In aircraft maintenance, a loose bolt can cause a crash. In automotive work, a loose bolt can cause a blowout or brake failure. The stakes are different, but the discipline is the same.
Automotive shops that hire A&P technicians often value them for complex diagnostics, engine rebuilds, and quality control. An A&P technician knows how to use a service manual, how to interpret test results, and how to communicate findings clearly — skills that transfer directly. Some A&P technicians move into automotive after years in aviation because the work is similar but the hours are more predictable and the job market is larger.
However, A&P certification alone does not make you an automotive technician. You will still need to learn automotive-specific systems, tools, and procedures. Many shops will hire an A&P technician as a junior technician or apprentice and train them on the automotive side while they bring their precision and documentation habits to the team.
Finding FAA-approved schools and training facilities
The FAA maintains a searchable database of approved Airframe and Powerplant Mechanic Schools on its website. You can search by state and see the school's accreditation status, contact information, and program length. This is the official list; if a school is not on it, it is not FAA-approved, and your hours may not count toward certification.
For on-the-job training, you need an FAA-approved maintenance facility. Airlines, repair stations, and some military bases are approved. Some automotive shops are not, so ask directly whether the facility is FAA-approved for A&P training before you commit to working there. The facility's management or training coordinator can confirm this and explain how they document your hours.
When evaluating a school or facility, ask about the instructor-to-student ratio, the condition of the training aircraft or engines, whether you work on real equipment or simulators, and what happens after you graduate. Schools with strong industry connections often place graduates quickly.
Cost, timeline, and job outlook
Formal school costs vary widely — from roughly $20,000 to $50,000 depending on the school, location, and whether you live on campus. Some schools offer payment plans or partnerships with lenders. The GI Bill covers A&P training at approved schools if you are a veteran or active-duty military. Some employers, particularly airlines, offer tuition reimbursement if you commit to working for them after certification.
The timeline is 18 to 24 months for school, or 3 to 5 years for on-the-job training. Add 2 to 4 weeks for exam preparation and scheduling. Once you pass all exams and the practical test, you receive your A&P certificate from the FAA, which does not expire.
Job demand for A&P technicians in aviation is steady because the FAA requires certified mechanics for all maintenance work. In automotive, demand depends on the shop and region, but specialty shops, racing teams, and high-end restoration shops actively seek A&P-trained people. The skills are valued even if the specific credential is not required by law in automotive work.
Frequently Asked Questions
Do I need a high school diploma to become an A&P technician?
The FAA does not require a high school diploma, but most approved schools do. If you do not have a diploma or GED, ask the school directly — some may accept you if you demonstrate the ability to do the work. On-the-job training facilities may have different requirements.
Can I get A&P certification while working full-time?
Formal school is full-time and difficult to combine with a job. On-the-job training is designed for working people — you earn a paycheck while training — but it takes 3 to 5 years. Some schools offer evening or weekend classes, though this is rare for A&P programs.
What is the difference between an A&P certificate and an automotive technician certification?
A&P is an FAA certificate for aircraft maintenance. Automotive certifications like ASE (Automotive Service Excellence) are industry credentials for car work. They test different systems and procedures. An A&P does not automatically may have access to you as an automotive technician, but the discipline and documentation skills transfer.
Can I work on cars with an A&P certificate but no automotive experience?
An A&P certificate shows you can learn technical material and follow procedures precisely. Most shops will hire you as a junior technician or apprentice and train you on automotive systems. Your A&P background is an asset, not a substitute for automotive training.
How long does an A&P certificate last?
An A&P certificate does not expire. Once you pass the exams and practical test, you hold the certificate for life. However, if you work on aircraft, you must maintain currency by working in the field or taking recurrent training. For automotive work, there is no recurrency requirement.