Airplane mechanics train through FAA-approved programs, apprenticeships, or military service, then earn certification by passing written and practical exams
Airplane mechanics—officially called aircraft maintenance technicians—work on systems far more complex than car engines, but the training path is more structured than automotive work. You cannot legally maintain an aircraft without an FAA Airframe and Powerplant (A&P) certificate. That certificate requires classroom hours, hands-on training, and passing three separate exams. The most common routes are attending an FAA Part 147 school, completing an apprenticeship, or serving in military aircraft maintenance and then testing out.
The work itself is nothing like car maintenance. You are troubleshooting hydraulic systems, avionics, pressurization, and engines that run at 35,000 feet. A mistake does not strand someone on the highway—it can kill 200 people. That is why the training is longer, the testing is harder, and the job pays better than most automotive technician roles.
Key Takeaways
- The FAA A&P certificate requires either 1,500 hours at an approved school, 5,000 hours as an apprentice, or equivalent military experience before you can test.
- Part 147 schools typically take 18 to 24 months full-time and cost between $30,000 and $60,000, depending on location and whether you attend a community college or private program.
- You must pass three separate FAA exams—written knowledge, oral, and practical—and the pass rate on the written exam is roughly 70 percent on the first attempt.
- Military aircraft maintenance training counts toward the 1,500-hour requirement, so veterans often need only to test rather than retrain.
- Once certified, you work for airlines, maintenance contractors, the military, or manufacturers, and the job involves shift work, on-call schedules, and physical demands like working in confined spaces.
The Two Main Training Routes: School Versus Apprenticeship
An FAA Part 147 school is the faster path. These are accredited programs at community colleges, technical schools, and private institutions. You attend full-time for 18 to 24 months, complete 1,500 hours of classroom and lab work, and then test for your A&P certificate. The curriculum covers airframe systems (structure, hydraulics, pneumatics, electrical), powerplant systems (engines, fuel, ignition), and general knowledge (regulations, safety, materials). You work on actual aircraft or trainers in a lab setting, not just watch videos.
An apprenticeship takes longer but costs less upfront. You work for an airline, maintenance contractor, or manufacturer while learning on the job. You log 5,000 hours of hands-on work under a certified mechanic's supervision, plus attend related classroom instruction (usually one or two days per week). Apprenticeships typically take four to five years. You earn a wage while training, which matters if you cannot afford to stop working for two years. The downside is that not all employers offer apprenticeships, and the hours must be documented and verified by the FAA.
Military service is a third option. If you worked on aircraft in the Air Force, Navy, Marines, or Coast Guard, your military training counts toward the 1,500-hour requirement. You still must pass the three FAA exams, but you skip the school portion. Many veterans test within months of leaving service.
What Happens Inside an FAA Part 147 Program
A typical Part 147 school divides training into two tracks: Airframe and Powerplant. Some schools teach them together; others separate them. You need both to earn the full A&P certificate, though some people earn one first and add the other later.
The Airframe track covers the aircraft structure itself: wings, fuselage, landing gear, hydraulic systems, pneumatic systems, electrical systems, and avionics. You learn to read blueprints, use specialized tools, perform inspections, and troubleshoot problems. Lab work includes disassembling and reassembling components, practicing welding and riveting, and working on actual aircraft or full-scale trainers.
The Powerplant track focuses on engines and fuel systems. You study how jet engines and piston engines work, fuel delivery, ignition systems, lubrication, cooling, and engine-mounted accessories. You learn to perform engine inspections, replace components, and run ground tests. This track is more technical than Airframe and requires stronger math and physics skills.
Both tracks include FAA regulations (Part 61, Part 121, Part 145), safety procedures, and human factors—how fatigue, distraction, and communication failures lead to mistakes. You also learn about corrosion control, non-destructive testing, and how to document your work so the FAA can audit it later.
The Three FAA Exams You Must Pass
After completing your training hours, you schedule three separate exams with an FAA-designated testing center. You cannot skip any of them, and you cannot work as a mechanic until you pass all three.
The written exam (also called the knowledge test) covers general, airframe, and powerplant material. It is 100 multiple-choice questions, and you have six hours. You need a score of 70 percent or higher to pass. Most people study for four to eight weeks using study guides, practice tests, and review courses. The pass rate on the first attempt is roughly 70 percent, so about one in three people retake it.
The oral exam is a conversation with an FAA examiner. They ask you questions about systems, procedures, and troubleshooting scenarios. It typically lasts two to three hours. You need to explain your reasoning, not just give right answers. Examiners are looking for whether you understand the "why" behind the rules, not just memorized facts.
The practical exam (called the "checkride") is hands-on work. You perform actual maintenance tasks—inspecting components, replacing parts, running tests—while an examiner watches and asks questions. This is where your lab training matters. You must show you can do the work safely and correctly, not just talk about it.
Cost, Time, and What Employers Actually Want
Part 147 school costs vary widely. Community colleges typically charge $20,000 to $40,000 total for the full program. Private technical schools run $40,000 to $60,000 or more. Some schools offer payment plans or financial aid. Military veterans may use the GI Bill to cover tuition. Apprenticeships cost little or nothing upfront because you are paid while training, though the hourly wage is usually lower than a certified mechanic's pay.
Time investment is significant either way. A Part 147 school takes 18 to 24 months full-time. An apprenticeship takes four to five years. Military training varies, but most people spend two to four years in service before testing.
Once certified, employers care about your A&P certificate and your experience. Airlines and major maintenance contractors prefer candidates who have worked on the specific aircraft they operate—Boeing 737, Airbus A320, regional jets, etc. You may start as a line mechanic (quick turnarounds between flights) or in a heavy maintenance hangar (deep inspections and overhauls). Shift work is standard. Many positions require being on-call for emergencies. Pay ranges from $50,000 to $80,000 per year starting out, with experienced mechanics earning $90,000 to $120,000 or more, depending on employer and location.
Physical and Mental Demands of the Job
Airplane maintenance is physically demanding in ways that differ from car work. You work in confined spaces—inside wheel wells, cargo holds, and engine compartments. You climb ladders and scaffolding. You lift heavy components. You work in cold hangars, hot tarmacs, and sometimes in rain or snow. Repetitive motions like fastening bolts and inspecting rivets can cause strain injuries over time.
The mental demands are higher too. You must follow procedures exactly—there is no "close enough" in aircraft maintenance. You document every step because the FAA audits records. You work under pressure: if you find a problem, the aircraft is grounded until it is fixed, which costs the airline thousands of dollars per hour. You must stay focused during long shifts and catch problems that could be invisible until they cause a failure at altitude.
Drug testing is mandatory in the aviation industry. Background checks are standard. You need a valid driver's license and, depending on the employer, may need a security clearance.
Finding Schools and Apprenticeships Near You
The FAA maintains a list of Part 147 schools on its website. You can search by state and see which schools are accredited. Not all technical schools are Part 147-approved, so verify before enrolling—only hours from an approved program count toward your 1,500-hour requirement.
For apprenticeships, contact airlines, maintenance contractors (like Lufthansa Technik, AAR, or SkyWest), and military bases in your area. Some regional airlines and cargo carriers actively recruit apprentices. The Aircraft Maintenance Technician Association (AMTA) and the Professional Aviation Maintenance Association (PAMA) maintain job boards and can point you toward employers offering apprenticeships.
If you are military, speak with your branch's career transition office before you leave service. They can help you document your training hours and connect you with testing resources.
What Happens After You Get Your A&P Certificate
Your A&P certificate is a license to work, not a may provide of a job. You still need to find an employer and often start at entry-level positions. Many mechanics begin on the line at regional airports or smaller carriers, then move to major airlines or maintenance bases as they gain experience and seniority.
Continuing education is expected. The FAA requires you to stay current with regulations and new aircraft systems. Many employers offer training on new aircraft types or systems. Some mechanics pursue additional certifications—inspection authorization (IA), which allows you to sign off on major inspections, or type ratings for specific aircraft.
The job market for aircraft mechanics is generally strong. Airlines and maintenance contractors consistently hire, especially as older mechanics retire. However, hiring slows during economic downturns or when airlines reduce flights. Location matters—major hubs like Atlanta, Dallas, Los Angeles, and Chicago have more opportunities than smaller cities.
Frequently Asked Questions
Can I become an airplane mechanic without attending a Part 147 school?
Yes, through a 5,000-hour apprenticeship or military service. However, you still must pass the same three FAA exams. An apprenticeship takes longer than school but costs less upfront. Military training counts if you worked on aircraft, and many veterans test within months of leaving service.
What is the difference between an A&P certificate and an inspection authorization?
An A&P certificate lets you perform maintenance and sign off on routine work. An inspection authorization (IA) is an additional credential that allows you to conduct major inspections and approve aircraft for return to service. You must have an A&P first, then work for two years before you can test for an IA.
Do I need a high school diploma or GED to attend a Part 147 school?
Most schools require a high school diploma or GED. Some may accept students without one if they pass an entrance exam or complete remedial coursework. Contact schools directly about their admission requirements.
How long does it take to find a job after passing the FAA exams?
It varies. Some mechanics are hired before they even test, especially if they completed an apprenticeship with an employer. Others take weeks or months to find a position, depending on location, job market conditions, and whether they are willing to relocate. Networking through your school or apprenticeship program often speeds up the process.
Can I work on aircraft with just an Airframe certificate or just a Powerplant certificate?
Yes, but your job options are limited. Some positions require only Airframe or only Powerplant. However, most employers prefer mechanics with both ratings because it makes scheduling and cross-training easier. Many mechanics earn one rating first, then add the other within a few years.