Aircraft mechanic training is not the same as automotive training, even though both involve engines and systems

If you arrived here from automotive maintenance, you might think aircraft mechanic work is a natural step up. It is not. Aircraft mechanics work under federal rules that do not explore to car repair, inspect and maintain systems where failure can kill people at 35,000 feet, and need certifications that take years to earn. The training is longer, the standards are stricter, and the job itself is fundamentally different from turning wrenches on vehicles.

The path to becoming an aircraft mechanic starts with either a Federal Aviation Administration (FAA) Part 147 school or on-the-job experience at an FAA-certified repair station, followed by written, oral, and practical exams for your Airframe and Powerplant (A&P) certificate. Most people choose the school route because it is faster and more structured. You cannot skip the training and go straight to the certificate—the FAA requires either 1,900 hours of classroom and lab work at an approved school, or 5,000 to 10,000 hours of documented work experience under a licensed mechanic, depending on which certificate you pursue.

Key Takeaways

  • Aircraft mechanic training requires FAA certification through either a Part 147 school (18 to 24 months) or on-the-job experience at a certified repair station (5 to 10 years), not just a high school diploma.
  • The Airframe and Powerplant (A&P) certificate is the standard credential, and you must pass written, oral, and practical exams administered by the FAA Designated Pilot Examiner (DPE) system.
  • Part 147 schools teach airframe systems, powerplant systems, and general knowledge required by the FAA, with hands-on work on real or simulated aircraft components.
  • Aircraft maintenance work is governed by federal regulations (14 CFR Part 43 and Part 65) that do not exist in automotive repair, making the job and training fundamentally different from car mechanics.
  • Most aircraft mechanics work at commercial airlines, maintenance repair organizations (MROs), or military bases, not independent shops, and the work environment and pay structure differ significantly from automotive repair.

What the FAA Part 147 school route looks like

A Part 147 school is an FAA-approved training program that teaches you the knowledge and hands-on skills needed to pass the A&P exams. These schools exist at community colleges, technical institutes, and private aviation training centers. The curriculum is set by the FAA and covers three main areas: general knowledge (electricity, hydraulics, materials, weight and balance), airframe systems (structures, flight controls, landing gear, environmental systems), and powerplant systems (engines, fuel systems, ignition, lubrication).

The program typically takes 18 to 24 months of full-time study. You will spend time in classrooms learning theory, in labs working on actual aircraft components or trainers, and sometimes on the ramp or in hangars at partner facilities. At the end, the school will issue you a graduation certificate stating you have completed the 1,900-hour requirement. That certificate alone does not make you a mechanic—it qualifies you to sit for the FAA exams.

Cost varies widely. Community college programs may run $15,000 to $30,000 total, while private schools can be $40,000 to $60,000 or more. Some schools offer payment plans or work-study arrangements. The GI Bill covers training at approved schools if you are a veteran or active-duty service member. After graduation, you will schedule your written, oral, and practical exams with an FAA Designated Pilot Examiner (DPE)—not your school, but an independent examiner the FAA has authorized.

The on-the-job training path and why it takes much longer

If you start as a mechanic trainee or helper at an FAA-certified repair station or airline maintenance facility, you can earn your A&P certificate through documented work experience instead of school. The FAA requires 5,000 hours of supervised work if you want both the Airframe and Powerplant ratings, or 3,000 hours for one rating alone. At 40 hours per week, that is roughly 2.5 to 5 years of full-time work.

The catch is that not all work counts equally. You must work under the direct supervision of a licensed A&P mechanic, and your supervisor must sign off on the hours and the types of work you performed. The FAA has a list of acceptable tasks—you cannot just clock hours; you have to do actual maintenance, inspection, and repair work on aircraft or components. Many repair stations will hire you as a trainee and pay you while you accumulate hours, but the pay is lower than a licensed mechanic's, and you are not fully productive until you have your certificate.

This path makes sense if you cannot afford school upfront or prefer to earn while you learn. However, it takes significantly longer, and you are dependent on your employer to give you the right mix of work experience and to document it properly. If you change jobs, your new employer may not accept all your previous hours, or may require you to start over in certain areas.

What you actually learn in aircraft mechanic training

The knowledge required is broader and more precise than automotive repair. You will learn how aircraft structures are built and how to inspect them for cracks, corrosion, and fatigue. You will study hydraulic systems that control flight surfaces, pressurization systems that keep the cabin safe at altitude, and electrical systems that are far more complex than a car's. You will learn engine theory specific to turbojets and turboprops, fuel system contamination control, and how to read and interpret maintenance manuals and technical drawings.

A major part of the training is learning the regulatory environment. You will study 14 CFR Part 43 (maintenance rules), Part 65 (mechanic certification), and the specific maintenance requirements for different aircraft types. You will learn how to fill out maintenance logs, understand airworthiness directives (mandatory safety fixes issued by the FAA), and recognize when an aircraft is not safe to fly. This is not optional knowledge—it is the law, and violations can result in criminal charges, not just a fine.

Hands-on training includes working with real aircraft components, engine teardowns and rebuilds, rigging flight controls, and using specialized tools and test equipment. Many schools have partnerships with airlines or maintenance shops that let students work on actual aircraft during their training. This real-world exposure is valuable because aircraft maintenance is unforgiving—a mistake that would be a nuisance in a car shop could cause an accident in the air.

The FAA exams: written, oral, and practical

After you finish your Part 147 school or accumulate your required work hours, you take three separate exams administered by an FAA Designated Pilot Examiner. The written exam covers general knowledge, airframe systems, and powerplant systems—you must pass all three sections, and each section is scored separately. You can retake any section you fail, but you must pass all three before moving to the oral exam.

The oral exam is a conversation with the examiner about maintenance procedures, regulations, and troubleshooting. The examiner will ask you to explain how you would approach a maintenance task, what tools you would use, what regulations explore, and how you would know if the work was done correctly. This is not a quiz with right and wrong answers—it is an assessment of whether you understand the principles well enough to make safe decisions on the job.

The practical exam is a hands-on test where you perform actual maintenance tasks on aircraft or components under the examiner's observation. You might be asked to inspect a wing for corrosion, troubleshoot an electrical circuit, rig a control surface, or perform an engine run-up. The examiner is watching to see if you follow procedures, use the right tools, work safely, and produce work that meets standards. You must pass all three exams to earn your A&P certificate.

Where aircraft mechanics work and how the job differs from automotive repair

Most aircraft mechanics work for commercial airlines, maintenance repair organizations (MROs) that contract with airlines, military bases, or general aviation shops. The work environment is different from an automotive shop. You might work in a large hangar with dozens of other mechanics, on the ramp in all weather, or in a specialized facility for engine overhauls. Shift work is common—airlines need maintenance done around the clock to keep aircraft flying.

The pace and pressure are different too. A car can be taken out of service for a week if something goes wrong. An aircraft that is grounded costs the airline thousands of dollars per hour. Maintenance is scheduled tightly, and you are expected to work efficiently and accurately. At the same time, you have more authority and responsibility than many automotive technicians. You sign off on work that certifies the aircraft is safe to fly, and that signature carries legal weight.

Pay varies by employer and location. Airlines and large MROs typically pay more than smaller shops, and major hubs pay more than rural areas. Entry-level mechanics at regional airlines or smaller shops might start in the $40,000 to $50,000 range, while experienced mechanics at major carriers can earn $80,000 to $120,000 or more, plus benefits. Military mechanics often have different pay scales and job security. The work is steady—aircraft always need maintenance—but it is not a path to self-employment the way some automotive work is.

Choosing between a Part 147 school and on-the-job training

The school route is faster and more predictable. You know the timeline (18 to 24 months), you get structured instruction, and you can start job hunting with your certificate in hand. Most employers prefer hiring someone with a Part 147 certificate because they know you have met a standard curriculum. The downside is the upfront cost and the time commitment if you cannot work while studying.

The on-the-job route lets you earn while you learn and avoid school debt, but it takes much longer and depends on finding an employer willing to hire and train you. You also have to be disciplined about documenting your hours and making sure you get the right mix of experience. Some people combine both—they work part-time at a repair station while attending a Part 147 school, which speeds up the process and gives them real-world context for what they are learning in class.

A third option is military training. If you serve as an aircraft mechanic in the Air Force, Navy, or Army, you receive extensive training and hands-on experience. Many military mechanics transition to civilian work after service, and some employers value military training highly. However, military service is a multi-year commitment and not the right choice for everyone.

Frequently Asked Questions

Do I need a high school diploma or GED to attend a Part 147 school?

Yes, most Part 147 schools require a high school diploma or GED as a prerequisite. Some schools may accept students without one if they pass an entrance exam or complete remedial coursework, but this varies by school. Check with the specific school you are interested in.

Can I work as an aircraft mechanic without an A&P certificate?

No. Federal law requires an A&P certificate to perform maintenance on aircraft that carry passengers or cargo. You can work as a trainee or helper under a licensed mechanic's supervision, but you cannot sign off on work or be the primary mechanic on a job without the certificate.

How long does it take to get an A&P certificate after finishing Part 147 school?

The school gives you the graduation certificate, but earning the A&P certificate depends on passing the FAA exams. Most people schedule their exams within a few weeks or months of graduation. The exams themselves take several days spread over a few weeks. If you pass on your first attempt, you could have your certificate within a month or two of finishing school.

What if I fail one of the FAA exams?

You can retake any section you fail. There is no limit on the number of attempts, but you must pass all three sections (written, oral, practical) to earn the certificate. Many people pass on the first try, but some need to study and retake one section. Your Part 147 school usually offers study materials and may allow you to use their facilities to prepare for a retake.

Is aircraft mechanic training covered by the GI Bill?

Yes, many Part 147 schools are approved for GI Bill benefits. If you are a veteran or active-duty service member, you can use your education benefits to cover tuition and fees. Contact the school's veterans affairs office to confirm they are approved and to understand what your benefits will cover.