What aircraft mechanic certification actually is
Aircraft mechanic certification is a credential issued by the Federal Aviation Administration (FAA) that proves you can legally perform maintenance, repairs, and inspections on aircraft. Unlike general automotive work, which varies by state and employer, aircraft maintenance is federally regulated—you cannot legally touch an aircraft's systems without this certificate, regardless of how much experience you have.
The FAA issues two main certificates: an Airframe certificate (covering the aircraft structure, skin, and systems) and a Powerplant certificate (covering engines and propulsion systems). Most aircraft mechanics hold both, called an A&P certificate. You cannot work on commercial aircraft, private planes, or helicopters in any maintenance capacity without one.
This is fundamentally different from automotive certification. A car mechanic can work without any government credential; an aircraft mechanic cannot. The FAA treats aircraft maintenance as a safety-critical function because a failure in the air has no shoulder to pull onto.
Key Takeaways
- The FAA issues Airframe and Powerplant certificates separately; most mechanics earn both to become an A&P technician.
- You must complete an FAA-approved maintenance technician school, accumulate specific hands-on hours, and pass written and practical exams for each certificate.
- Approved schools typically take 18 to 24 months full-time; the alternative path (on-the-job training) takes 5 to 10 years and requires employer sponsorship.
- After certification, you must maintain currency through recurrent training and follow FAA regulations on every job you perform.
- Aircraft mechanic work is federally regulated and pays significantly more than automotive work, but the entry barrier is higher and the responsibility is absolute.
The two paths to certification: school or on-the-job training
The FAA recognizes two routes to an A&P certificate. The school route is faster: you attend an FAA-approved Part 147 maintenance technician school, complete the curriculum in 18 to 24 months full-time, then sit for the FAA exams. The on-the-job training route requires you to work under a licensed mechanic at an FAA-certified repair station or airline for 5 to 10 years (depending on the specific combination of hours and tasks), then sit for the same exams.
Most people choose the school route because it is faster and does not require finding an employer willing to sponsor you through years of training. On-the-job training is rare now; most repair stations and airlines prefer to hire mechanics who already hold the certificate. If you do pursue on-the-job training, your employer must document every task you perform and sign off on your logbook—this is not something you can do informally.
Both routes lead to the same FAA exams and the same certificate. The difference is time and cost. School costs money upfront (tuition ranges widely by institution and location); on-the-job training costs time and requires an employer's commitment.
What happens at an FAA-approved maintenance school
An FAA Part 147 school teaches aircraft systems, maintenance procedures, and federal regulations in a structured curriculum. You study airframe systems (hydraulics, electrical, structural repair, avionics), powerplant systems (engines, fuel systems, ignition), and general subjects (weight and balance, aircraft drawings, safety). The school also provides hands-on work in a shop environment where you practice actual maintenance tasks on real aircraft or trainers.
The school does not award the certificate—it prepares you to pass the FAA exams. After you finish the curriculum, the school issues you a graduation certificate, which you then use to register for the FAA written and practical tests. The school's job is to make sure you know the material; the FAA's job is to verify that you do.
Approved schools are located across the country. Some are community colleges, some are private institutions, and some are operated by airlines or maintenance organizations. Tuition, schedule, and program length vary. You can search for approved schools on the FAA's website under Part 147 maintenance technician schools.
The FAA written and practical exams
After you complete your training (whether through school or on-the-job hours), you register with the FAA to sit for the exams. There are three written tests: one for Airframe, one for Powerplant, and one for General (covering regulations, safety, and principles that explore to both). Each written test is multiple-choice and covers specific knowledge areas the FAA publishes in advance.
Once you pass all three written tests, you schedule a practical exam called an oral and practical test (O&P). An FAA examiner (called a Designated Mechanic Examiner, or DME) meets with you in person, asks you technical questions about aircraft systems and maintenance procedures, and watches you perform actual maintenance tasks. The examiner is testing whether you can think through a problem, explain your reasoning, and do the work safely and correctly.
You must pass the written tests and the O&P for each certificate you want (Airframe and Powerplant). Many mechanics take the Airframe exam first, then the Powerplant exam, spacing them out over a few months. The FAA does not set a time limit between exams, so you can study and test at your own pace.
What you can and cannot do with an A&P certificate
Once you hold an A&P certificate, you can perform maintenance, repairs, and inspections on aircraft at any FAA-certified facility—airlines, repair stations, manufacturers, or corporate flight departments. You can also sign off on maintenance work, meaning your signature certifies that the work was done correctly and the aircraft is safe to fly. That signature carries legal weight; if something goes wrong, you are responsible.
You cannot perform maintenance on an aircraft without a certificate, even if you have years of experience. You cannot work at a facility that is not FAA-certified. And you cannot sign off on work you did not personally perform or directly supervise. The FAA takes these rules seriously because aircraft safety depends on them.
You also cannot let your certificate lapse through inactivity. You must stay current by working in the field or completing recurrent training. If you step away from aircraft maintenance for too long, you may need to retrain or retest to get back to work.
Cost, time, and job market reality
School-based training typically costs between $20,000 and $50,000 in tuition, depending on the institution and whether you attend full-time or part-time. Some schools offer payment plans or financing. The time commitment is 18 to 24 months full-time, or longer if you attend part-time while working.
Aircraft mechanics earn more than automotive technicians on average, and the job market is strong—airlines and repair stations consistently report difficulty finding may have access to mechanics. However, the entry barrier is real: you cannot start work until you hold the certificate, and you cannot hold the certificate until you pass the FAA exams. There is no "entry-level" aircraft mechanic job; every position requires the credential.
After certification, you will likely work for an airline, a repair station, a manufacturer, or a corporate flight department. Some mechanics eventually start their own repair stations, but that requires additional FAA authorization and business experience.
Recurrent training and staying current
The FAA requires aircraft mechanics to stay current in their field. This means working regularly on aircraft or completing recurrent training courses that cover new systems, regulatory changes, and safety updates. If you step away from aircraft maintenance for an extended period, you may need to complete recurrent training before you can return to work.
Your employer typically provides or pays for recurrent training. Airlines and large repair stations have formal training programs; smaller shops may send you to outside courses. The specific requirements depend on the type of aircraft you work on and the regulations that explore to your employer.
Staying current is not optional. It is a condition of holding the certificate and working legally in the field. The FAA can audit your training records, and your employer is responsible for ensuring you meet the requirements.
Frequently Asked Questions
Can I get an aircraft mechanic certificate without attending a school?
Yes, through on-the-job training at an FAA-certified facility, but it takes 5 to 10 years and requires an employer to sponsor you and document your hours. Most employers prefer to hire mechanics who already hold the certificate, so this path is difficult to pursue in the current job market.
What is the difference between an A&P certificate and an airframe-only or powerplant-only certificate?
An A&P certificate means you hold both Airframe and Powerplant certificates. You can earn them separately and at different times. Some mechanics hold only one, but most employers prefer A&P mechanics because they can work on any part of the aircraft.
Do I need a high school diploma or GED to attend an aircraft mechanic school?
Most FAA-approved schools require a high school diploma or GED. Some schools may accept students without one if they pass an entrance exam or complete remedial coursework. Contact the school directly to ask about their specific requirements.
How long does it take to pass the FAA exams after finishing school?
That depends on you. You can register for the written tests as soon as you graduate, and many people pass all three within a few weeks. The practical exam (O&P) may take longer to schedule depending on examiner availability in your area. Most mechanics complete the entire process within 2 to 4 months of finishing school.
Can I work on my own aircraft if I have an A&P certificate?
Yes, you can perform maintenance on your own aircraft. However, if you want to sign off on the work (certifying it is airworthy), you must do so under the rules that explore to your situation—either as an employee of an FAA-certified facility or under a specific FAA authorization for owner-performed maintenance. The rules are complex, so consult the FAA or an experienced mechanic before you start.