Ace Hardware key copying costs between $2 and $6 per key, depending on the key type and your location

Ace Hardware offers key copying at most of its locations, and the price depends on what kind of key you need copied. Standard house keys and basic car keys typically cost $2 to $4. Specialty keys—including some car keys with chips or programming, padlock keys, and decorative keys—run $4 to $6. A few locations may charge slightly more, and some regional variations exist, so calling your local store before you go is the safest approach.

The actual cost matters less than understanding when key copying is worth doing yourself versus when you need a dealership or locksmith instead. A $3 key copy at Ace makes sense for your house, garage, or shed. It does not work for most modern car keys, which need programming that Ace cannot do.

Key Takeaways

  • Ace Hardware copies standard house keys and basic car keys for $2 to $6 depending on key type, but prices vary by location.
  • Modern car keys with chips or remote functions cannot be copied at Ace Hardware—you need a dealership or automotive locksmith for those.
  • Calling your local Ace store before you go confirms they have the key blank in stock and can handle your specific key type.
  • For car keys, a dealership copy costs more but includes programming; a locksmith is usually cheaper and faster than either option.

What Ace Hardware can and cannot copy

Ace Hardware has the equipment to copy mechanical keys—keys that work by physical shape alone. This includes house keys, apartment keys, office keys, padlock keys, mailbox keys, and older car keys that have no electronics. The machine reads the original key's cuts and reproduces them on a blank. The process takes a few minutes and costs $2 to $4 for most of these.

Ace Hardware cannot copy transponder keys (car keys with chips), proximity keys (keyless entry fobs), or smart keys (push-button start keys). These keys contain electronics that must be programmed to your specific vehicle. Copying the physical shape does nothing—the car will not recognize it. You need a dealership, a car locksmith, or an automotive key programmer for these. Attempting to copy them at a hardware store wastes your money.

How Ace Hardware key copying works

You bring your original key to the store and hand it to someone at the key-cutting station, usually near the front or back of the store. They place your key in a machine that has a cutting blade and a tracing stylus. The stylus follows the grooves and cuts of your original key while the blade cuts an identical pattern into a blank key. The whole process takes about five minutes.

Before you leave, test the copy in the lock if possible—most Ace locations will let you do this right there. A key that does not turn smoothly may have been cut slightly off, and the staff can usually adjust it or cut a new one. Testing on the spot saves you a trip back.

Ace Hardware versus other places to copy keys

Home Depot and Lowe's offer key copying at similar prices ($2 to $5) with the same limitations—mechanical keys only. Walmart and some grocery stores have key-cutting machines in-store as well. The main difference is convenience: you go where you already shop. Quality is usually comparable across all of them.

For car keys, a locksmith is usually faster and cheaper than a dealership. A locksmith can copy and program a transponder key for $50 to $150 depending on the key type and your area. A dealership charges $100 to $300 or more for the same work but guarantees the key will work with your specific vehicle. If you have lost your only key, a dealership is the safer choice because they have your vehicle's records. If you have a spare and just need a backup, a locksmith is often the better value.

Why you might need a key copy for your vehicle

If you own an older car with a mechanical key (most vehicles made before 2000), copying a spare at Ace Hardware makes sense. It costs $3, takes five minutes, and works perfectly. You get a backup key without leaving home.

If your car was made after 2000, it almost certainly has a transponder key or proximity key. Copying it at Ace Hardware will not work, even though the physical copy will look identical. The car's computer will reject it because the chip inside has not been programmed to match your vehicle's security system. You must go to a locksmith or dealership.

What to bring and what to expect

Bring your original key and your wallet. You do not need an ID for key copying—it is not a restricted service. If you are copying a car key, bring your vehicle identification number (VIN) or your car's registration. Some locksmiths ask for this to confirm you own the vehicle, though Ace Hardware does not.

Expect to wait 5 to 10 minutes if the store is not busy. During peak hours (weekends, early evenings), you may wait longer. Call ahead if you are in a hurry. Ask the staff whether they have the key blank in stock—unusual key types or very old keys sometimes require a special blank that may not be in the store.

When to skip the hardware store and go elsewhere

Do not go to Ace Hardware if you need a car key programmed, a fob reprogrammed, or a key for a vehicle made in the last 20 years. Do not go if you have lost your only key to your car—you need a locksmith or dealership who can confirm ownership. Do not go if you need a key for a security system, a safe, or a lock you do not own (you may be asked to prove ownership).

Go to a locksmith instead if you need a key copied quickly and cannot wait for a dealership appointment. Go to a dealership if you have lost your only car key and need to prove ownership through your registration and VIN. Go to a locksmith if you need a transponder key copied and want to avoid dealership prices.

Frequently Asked Questions

Can Ace Hardware copy a car key with a remote?

No. Car keys with remote buttons contain electronics that must be programmed to your vehicle. Ace Hardware can copy the physical shape, but the remote will not work. You need a locksmith or dealership to program it.

What if my key is worn or damaged?

Bring it anyway. The machine can usually read a worn key and cut a clean copy. If the original is too damaged to read accurately, the staff will tell you before charging. You can then decide whether to try a locksmith or order a replacement from the manufacturer.

Do I need to show ID to copy a key?

No. Ace Hardware does not require ID for key copying. However, if you are copying a car key, some locksmiths will ask for your registration or VIN to confirm you own the vehicle.

How long does a copied key last?

A properly cut key lasts as long as the original—years of normal use. If a key breaks or wears out, you can copy it again or have a new one cut from the blank.

Can Ace Hardware copy a key without the original?

No. The key-cutting machine needs the original key to read its pattern. If you have lost your only key, you need a locksmith or dealership who can make a key from your lock or your vehicle's records.