Your Subaru will warn you before the key battery dies completely

When your Subaru's access key battery runs low, the vehicle displays a message on the dashboard or instrument cluster — usually something like "Key battery low" or "Smart key battery low." This warning means the battery inside your key fob is losing power and will soon stop working the remote lock, unlock, and trunk release functions. You have time to replace it before the key becomes completely dead.

The battery itself is a small coin-cell, typically a CR2032 or CR2025 depending on your model year and key type. These batteries cost between $3 and $8 and are sold at most drugstores, supermarkets, and auto parts retailers. Replacing it takes about five minutes and requires no tools beyond what you may already have at home.

Even if you ignore the warning, your key will still physically unlock and start your Subaru — the battery only powers the remote functions. You won't be locked out of your vehicle, but you will lose the convenience of remote access until you replace the battery.

Key Takeaways

  • A "key battery low" message means the coin-cell battery inside your key fob is weakening and should be replaced soon.
  • The battery is usually a CR2032 or CR2025, costs a few dollars, and can be purchased at pharmacies, grocery stores, or auto parts shops.
  • You can replace the battery yourself in about five minutes by carefully opening the key fob and swapping the old battery for a new one.
  • If you do not replace the battery, your key will still physically unlock and start the car, but remote functions will stop working.
  • Some Subaru models let you start the car by pressing the start button with the key fob itself, even if the battery is dead.

How to open your Subaru key fob

Most Subaru key fobs split into two halves along a seam that runs around the edge. Look for a small slot or notch on one side of the fob — this is where you insert a flat object to pry the two halves apart. A flathead screwdriver, a coin, or even a butter knife works for this step.

Insert your tool gently into the slot and twist or lever slightly until you feel the fob begin to separate. Do not force it — if it is not moving, you may be in the wrong spot. Once the halves start to come apart, you can usually finish by hand. Set one half aside in a safe place where the small parts cannot roll away.

Inside, you will see the circuit board and the battery sitting in a small metal holder or clip. The battery is round and flat, about the size of a dime. Note which side is facing up — the positive side (marked with a + symbol) should be facing toward you or toward the circuit board, depending on your fob design.

Removing and replacing the battery

Gently pry the old battery out of its holder using your fingernail, a plastic spoon, or the edge of a coin. Be careful not to damage the metal clip that holds it in place. Once the old battery is out, check the holder for any dirt or corrosion — if you see white or blue-green crusty buildup, wipe it clean with a dry cloth or a pencil eraser.

Before you insert the new battery, confirm it is the correct type by checking your Subaru owner's manual or looking at the old battery itself — the part number is printed on one side. Insert the new battery with the positive side facing the same direction as the old one was facing. Press it down gently until it sits flat in the holder and the metal clip holds it snugly.

Do not touch the battery with wet hands or allow moisture inside the fob. If you accidentally spilled anything on the circuit board, let it dry completely before reassembling — leaving it open for an hour or two is usually enough.

Closing the fob and testing the key

Line up the two halves of the fob so the seam is even all the way around. Press them together firmly until you hear or feel a click — the fob should snap shut without gaps. If it does not close smoothly, open it again and check that the circuit board is sitting flat and nothing is blocking the edges.

Once the fob is closed, test the remote functions: press the lock button and listen for the door locks to engage, then press unlock and confirm the locks release. Try the trunk button if your fob has one. If nothing happens, open the fob again and check that the battery is seated correctly and facing the right direction.

The dashboard warning should disappear after you start the car with the new battery installed. If the message persists, the battery may not be making good contact with the holder — open the fob once more and reseat it firmly.

When to replace the battery before the warning appears

If your key fob is several years old or you notice the remote functions are working but slower than usual — for example, you have to press the button twice to lock the doors — the battery may be weakening. You can replace it before the dashboard warning appears to avoid being caught without remote access.

Some owners replace the battery every two to three years as routine maintenance, especially if they use the remote functions frequently. This is optional but can save you from a dead key at an inconvenient moment, such as in a parking lot or late at night.

What to do if you cannot open the fob yourself

If the fob will not come apart or you are uncomfortable opening it, any Subaru dealership can replace the battery for you. The cost is usually between $20 and $50 for the service, plus the battery itself. Some independent locksmiths and auto parts stores also offer this service for a similar price.

You can also purchase a replacement key fob from a dealership or online retailer if you prefer not to open the old one. Prices vary widely depending on whether the fob needs to be programmed to your vehicle — some older Subaru models use unprogrammed fobs that work when ready, while newer models require a dealership to sync the fob to your car's receiver.

Keeping your spare key in working order

If you have a spare key fob, replace its battery at the same time you replace the one in your primary key. Spare fobs are often stored in a drawer or glove compartment and used less frequently, so their batteries can die unexpectedly when you actually need them. Replacing both batteries together ensures you always have a working backup.

Store key fobs away from extreme heat, moisture, and direct sunlight. Leaving a fob on a hot dashboard or in a humid bathroom can shorten battery life and damage the circuit board over time. A cool, dry drawer or your pocket is ideal.

Frequently Asked Questions

Can I drive my Subaru if the key battery is completely dead?

Yes. You can still unlock the door by inserting the physical key blade (usually hidden inside the fob) into the door lock, and you can start the car by pressing the start button with the key fob itself, even if the battery is dead. You will lose only the remote lock and unlock functions.

Where do I buy a CR2032 or CR2025 battery?

These batteries are sold at pharmacies, grocery stores, dollar stores, supermarkets, and auto parts retailers like AutoZone and O'Reilly. They typically cost $3 to $8. You can also order them online from Amazon or other retailers, though shipping may take several days.

What if I put the battery in backwards?

The remote functions will not work, but you will not damage the fob. straightforward open it again, flip the battery so the positive side faces the correct direction, and close it. Check your owner's manual or look at the battery holder itself for a + symbol showing which way it should go.

How often do key fob batteries need to be replaced?

Most key fob batteries last two to four years depending on how often you use the remote functions. Heavy users may need to replace the battery every one to two years, while light users might go longer. The dashboard warning will tell you when it is time.

Is there a way to replace the battery without opening the fob?

No. The battery is inside the fob and must be accessed by opening it. If you do not want to open it yourself, a Subaru dealership or locksmith can do it for you for a service fee.