What the 91502-scV-A00 clip does and when you need it

The 91502-scV-A00 is Honda's part number for a small plastic clip that holds the door or window garnish (trim molding) in place on 2003 to 2014 Honda vehicles. The garnish is the decorative or protective strip that runs along the edge of your door frame or window opening. When this clip breaks or comes loose, the garnish will rattle, sit unevenly, or fall out entirely.

You'll know you need this clip if you see a gap between the garnish and the door frame, hear a rattle from that area when you drive, or if the garnish has already popped out. The clip itself is small enough to drop and lose, which is why many owners end up ordering replacements.

This is a wear item — clips can crack from repeated door opening and closing, or from someone forcing the garnish during removal. Replacing it is straightforward and costs far less than a new garnish panel.

Key Takeaways

  • The 91502-scV-A00 is a plastic retention clip that holds door and window trim in place on Honda models from 2003 to 2014.
  • You need a replacement when the garnish rattles, sits crooked, or has fallen out of its channel.
  • The clip is small and straightforward to lose during removal, so order a spare if you're working on this repair yourself.
  • Installation takes minutes and requires no tools beyond your hands and possibly a plastic trim tool to avoid scratching the door.

How to identify which garnish needs the clip

Honda uses the 91502-scV-A00 clip on multiple garnish locations across the 2003–2014 lineup. The most common spots are the upper door frame trim (the strip that runs along the top of the door opening) and window frame trim on the B-pillar or C-pillar.

Before you order, locate the loose or missing garnish. Open the door fully and look at the trim pieces that frame the window opening. If you see a small plastic clip holding it in, or if there's a gap where a clip should be, you've found the right part. Take a photo of the location so you can reference it when ordering or when you're ready to install the replacement.

The part number 91502-scV-A00 is specific to Honda, so don't assume all garnish clips are the same. Always verify the part number matches your vehicle's year and model before purchasing.

Removing the old clip and garnish

Start by opening the door and examining how the garnish sits in its channel. The clip holds it from behind or underneath, depending on the location. Gently pull the garnish straight out toward you — do not twist or pry at an angle, as this can crack the plastic channel in the door frame itself.

Once the garnish is free, look at the back side. You'll see the small plastic clip attached to the garnish or sitting loose in the channel. If it's still attached to the garnish, it may pop off when you remove the trim. If it's loose in the channel, it will fall out — this is why many people lose these clips. Set it aside or discard it if it's cracked.

Inspect the channel in the door frame for debris, cracks, or deformation. If the channel is damaged, the new clip won't hold properly and the garnish will rattle again. Clean out any dirt or old adhesive with a dry cloth.

Installing the new 91502-scV-A00 clip

The new clip slides into the channel from the same direction the garnish came out. Position it so it will catch the back edge of the garnish when you reinsert the trim. Some clips sit in a groove at the bottom of the channel; others clip onto a lip at the back. Check the orientation of the old clip before you discarded it, or look at the channel itself to see where the clip naturally seats.

Once the clip is in place, slide the garnish back into the channel slowly and evenly. You should feel a slight resistance as the garnish edge engages the clip. Push until the garnish sits flush with the door frame and the clip holds it firmly. If it's loose or crooked, remove the garnish, reposition the clip, and try again.

Test the garnish by gently pulling on it. It should not move or rattle. Close the door and listen for any noise from that area as you drive. If you hear a rattle, the clip may not be seated correctly — pull the garnish out again and check the clip position.

Where to source the 91502-scV-A00 clip

This part is available from Honda dealerships, online parts retailers like RockAuto and eBay Motors, and some general automotive suppliers. Dealership pricing typically runs higher but guarantees the correct part. Online retailers often offer lower prices, especially if you're ordering multiple clips or other parts at the same time.

When ordering, always provide your vehicle's year, make, model, and trim level. The 91502-scV-A00 is the correct part number for 2003–2014 Hondas, but confirming your specific vehicle prevents mistakes. Some retailers will cross-reference the part number to your VIN for accuracy.

Clips are inexpensive — typically between $3 and $8 per unit — so consider ordering two or three if you're working on multiple garnish locations or want a spare on hand.

Common mistakes and how to avoid them

The most frequent error is forcing the garnish out at an angle, which cracks the channel in the door frame. The channel is plastic and brittle, especially on older vehicles. Always pull straight out, perpendicular to the door surface.

Another mistake is installing the clip upside down or backward. The clip has a specific orientation that matches the shape of the garnish edge. If it doesn't slide in smoothly, stop and reorient it rather than forcing it. Forcing a misaligned clip can crack both the clip and the garnish.

Losing the clip during removal is common because it's small and can fall into the door cavity or under the seat. Work over a clean, flat surface and keep the clip in a small container or bag until you're ready to install it. If you lose it, you'll need to order a replacement before you can reinstall the garnish.

When to call a professional instead

If the channel in the door frame is cracked, warped, or missing material, the clip alone won't solve the problem. The garnish will still rattle because there's nothing for the clip to grip. In this case, you may need to replace the entire garnish panel or have the channel repaired, which requires professional tools and informed.

If you're uncomfortable working with small plastic parts or if your vehicle is still under warranty, a Honda dealership can handle this repair quickly. Labor time is minimal — usually 15 to 30 minutes — so the total cost (parts plus labor) may be reasonable compared to the risk of damaging the door frame yourself.

Frequently Asked Questions

Can I use a different clip or a generic replacement instead of the 91502-scV-A00?

No. Honda clips are designed to match the specific shape and size of the garnish channel on each model. A generic clip or one from a different vehicle may not fit properly and will either fall out or fail to hold the garnish in place. Always use the correct part number.

What if the garnish is cracked or broken?

The clip only holds the garnish in place; it doesn't repair damage to the trim itself. If the garnish is cracked, you'll need to replace the entire panel. The clip can be reused if it's still intact, or you can order a new one at the same time.

How many clips do I need if multiple garnish pieces are loose?

Each garnish location uses one clip. If you have loose trim on both sides of the door or on multiple doors, count the number of loose pieces and order that many clips. It's common for clips to fail around the same time if the vehicle is older.

Will the garnish stay in place without the clip?

Temporarily, yes — the garnish may sit in the channel due to friction. However, it will rattle when you drive, especially over bumps, and it can fall out if the door is opened forcefully or if the vehicle is parked on an incline. The clip is essential for a permanent, rattle-free fit.

Is this repair covered under Honda warranty?

If your vehicle is still under the factory warranty, Honda dealerships will typically replace the clip at no charge. Check your warranty documentation or contact your dealership to confirm coverage. Most clips are inexpensive enough that even out-of-warranty repairs are affordable.