The 737 Max 10 is a commercial aircraft, not a vehicle you own or maintain

The 737 Max 10 is a large passenger jet built by Boeing for airlines. It is not a car, truck, or any vehicle you drive or maintain yourself. If you arrived here looking for information about your own vehicle's maintenance, certification, or safety systems, this page will not help you—you are in the wrong section of the site.

This article exists because the 737 Max 10 certification process involves the same core principle as vehicle maintenance: regulators test systems before they are used, and ongoing oversight keeps people safe. The mechanics are different, but the reasoning is the same. If you want to understand how certification works for the vehicles you actually own, the sections below explain that parallel.

Key Takeaways

  • The 737 Max 10 is a commercial airliner that requires Federal Aviation Administration (FAA) certification before it can carry passengers, similar to how your vehicle must pass safety inspections.
  • Certification involves testing the aircraft's systems, structures, and performance under extreme conditions to prove it meets safety standards.
  • Your own vehicle goes through a similar but simpler certification process: manufacturers test it, then your state inspects it before you can register it.
  • Both aircraft and vehicle certification exist because regulators have learned that testing before use prevents failures that kill people.
  • Ongoing maintenance on both aircraft and vehicles is required because certification only proves the vehicle was safe when new—it does not stay safe without care.

How aircraft certification parallels vehicle safety testing

When Boeing builds a new aircraft model like the 737 Max 10, the Federal Aviation Administration (FAA) must certify it before any airline can use it to carry passengers. That certification process involves hundreds of tests: structural tests, engine tests, system redundancy tests, and flight tests under conditions far more extreme than the aircraft will ever encounter in normal service. The FAA does not take Boeing's word for it. Engineers from the FAA observe, review data, and sometimes run their own tests.

Your vehicle goes through a similar but less intensive process. The manufacturer tests it in their own labs and on their own tracks. Then, before you can register it and drive it on public roads, your state's vehicle inspection program checks that it meets federal safety standards. The inspector looks at brakes, lights, emissions, steering, and structural integrity. Like the FAA, your state does not assume the manufacturer got it right—they verify it.

The reason both processes exist is the same: history shows that vehicles and aircraft fail in ways engineers did not predict until they test them. Certification catches those failures before they happen on a highway or at 35,000 feet.

Why ongoing maintenance is required after certification

Certification proves an aircraft or vehicle is safe when it is new. It does not prove it will stay safe. The 737 Max 10, like every aircraft, requires scheduled maintenance: inspections of the fuselage for cracks, replacement of hydraulic fluid, checks of the flight control systems, and replacement of parts that wear out. Airlines must follow a maintenance schedule set by Boeing and approved by the FAA. If they skip maintenance, the aircraft becomes unsafe even though it was certified.

Your vehicle works the same way. Your manufacturer's maintenance schedule—the one in your owner's manual—exists because parts wear out, fluids degrade, and systems fail if you do not service them. Brake fluid absorbs water and loses stopping power. Engine oil breaks down and stops protecting your engine. Transmission fluid thickens and causes shifting problems. Certification proved your brakes worked when the car was new. Maintenance keeps them working after 50,000 miles.

The FAA publishes Airworthiness Directives when it discovers a problem with an aircraft model—a design flaw, a manufacturing defect, or a maintenance issue that causes failures. Airlines must comply with these directives or ground the aircraft. Your vehicle has the same mechanism: the National Highway Traffic Safety Administration (NHTSA) issues recalls when manufacturers discover a safety defect. You are legally required to have recalls repaired, and your state can refuse to register your vehicle if you ignore a safety recall.

What the 737 Max 10 certification process actually involved

The 737 Max 10 is the largest variant of the 737 Max family. Boeing submitted it for FAA certification in 2020. The certification process required Boeing to demonstrate that the aircraft met all applicable Federal Aviation Regulations (FARs)—the same rules that govern every commercial aircraft in the United States.

The FAA tested or reviewed: the aircraft's structure under extreme loads, the engines under high-altitude and high-temperature conditions, the flight control systems with multiple failure scenarios, the avionics and navigation systems, the cabin pressurization and oxygen systems, and the evacuation procedures. Boeing had to prove that if one system failed, backup systems would take over. If two systems failed, the aircraft would still be controllable and safe.

The certification process took longer than originally planned because the 737 Max family had experienced two fatal crashes in 2018 and 2019—the Lion Air Flight 610 crash in Indonesia and the Ethiopian Airlines Flight 302 crash in Ethiopia. Both crashes were caused by a design flaw in the Maneuvering Characteristics Augmentation System (MCAS), a flight control system that was supposed to prevent stalls but instead pushed the nose down and overwhelmed the pilots. The FAA grounded the entire 737 Max fleet and did not allow it to fly again until Boeing redesigned the MCAS system and proved the fix worked. The 737 Max 10 certification included extensive testing of the redesigned MCAS to may support the same failure could not happen again.

The difference between aircraft certification and vehicle certification

Aircraft certification is more rigorous than vehicle certification because the consequences of failure are more severe. An aircraft failure at altitude kills everyone on board. A vehicle failure on a highway kills the occupants and possibly others, but the scale is smaller. The FAA requires more testing, more redundancy, and more documentation than NHTSA requires for cars.

Aircraft are also certified for a specific lifespan and a specific number of flight hours. The 737 Max 10 is certified for a design service goal of 90,000 flight hours and 36,000 flight cycles (takeoff and landing pairs). After that, the aircraft must be retired or undergo a major overhaul and recertification. Your vehicle has no such limit—you can drive it indefinitely as long as you maintain it and pass annual or biennial safety inspections.

Another difference: aircraft certification is federal and uniform across the United States. Vehicle certification is federal for safety standards, but your state adds its own inspection requirements. Some states require annual inspections, some require biennial inspections, and some require inspections only when you buy the vehicle. The federal standards are the same everywhere, but the enforcement varies.

What certification does and does not may provide

Certification means the aircraft or vehicle met safety standards at the time of certification. It does not mean it will never fail. It does not mean it is safe to ignore maintenance. It does not mean every individual aircraft or vehicle is perfect—manufacturing defects happen, and that is why recalls exist.

Certification means regulators have tested the design, verified the manufacturing process, and confirmed that the vehicle meets minimum safety standards. It means if a defect is discovered later, regulators have the authority and the process to order a fix. It means you have legal recourse if the vehicle fails due to a defect the manufacturer knew about or should have known about.

For the 737 Max 10 specifically, certification means the FAA has verified that the aircraft can be flown safely if the pilots are trained, the maintenance is done on schedule, and the aircraft is operated within its limits. It does not mean the aircraft is risk-free. No vehicle—aircraft or automobile—is risk-free. Certification means the risk has been tested, measured, and found acceptable.

How this applies to your own vehicle's safety

Your vehicle was certified by the manufacturer and inspected by your state before you could drive it. That certification is only valid if you maintain it. Your brakes were certified to stop the vehicle from 60 miles per hour in a certain distance. That certification assumes your brake fluid is fresh, your brake pads have thickness, and your rotors are not warped. If you ignore brake maintenance, your brakes will fail even though the vehicle was certified.

Your vehicle's safety systems—airbags, anti-lock brakes, electronic stability control, backup cameras—were all certified as part of the vehicle's design. They will work as designed only if you maintain the vehicle and repair defects when they appear. A recall notice is not optional. It is the manufacturer and the regulator telling you that a defect exists and must be fixed. Ignoring a recall voids your safety and may void your insurance coverage if you are in a crash caused by the recalled defect.

The 737 Max 10 certification process teaches the same lesson as your vehicle's maintenance schedule: certification proves safety at a point in time, but ongoing care is what keeps you safe over time.

Frequently Asked Questions

Is the 737 Max 10 safe to fly?

The FAA has certified the 737 Max 10 as safe for commercial passenger service, meaning it meets all applicable safety standards. The certification process included extensive testing of the MCAS system that caused the earlier crashes. However, safety depends on airlines maintaining the aircraft on schedule and pilots following procedures. No aircraft is risk-free, but certification means the risk has been tested and found acceptable.

Why did the 737 Max certification take so long?

The 737 Max family was grounded for 20 months after two fatal crashes in 2018 and 2019. The FAA required Boeing to redesign the MCAS flight control system and prove the fix worked before allowing any 737 Max variant to fly again. The 737 Max 10 certification included this redesigned system, which added time to the process.

How does aircraft certification differ from vehicle certification?

Aircraft certification is more rigorous because failure is more catastrophic. The FAA requires more testing, more redundancy, and more documentation than NHTSA requires for cars. Aircraft are also certified for a specific lifespan and flight hour limit, while vehicles can be driven indefinitely if maintained. Both processes exist to catch design flaws before they cause failures.

What happens if a defect is found after certification?

The FAA can issue an Airworthiness Directive requiring airlines to inspect or repair the aircraft. NHTSA can issue a recall requiring vehicle owners to have the defect fixed. Both are mandatory, and ignoring them can result in the aircraft being grounded or the vehicle failing inspection.

Do I need to worry about the 737 Max if I fly?

The 737 Max has been recertified and is flying safely. If you are concerned about any aircraft type, you can check the FAA's certification status or ask your airline which aircraft you will be flying. Your own vehicle's safety depends much more on your maintenance habits than on the aircraft type you occasionally fly in.