A CCV delete kit removes the crankcase ventilation system from your 6.7L Powerstroke diesel engine

The crankcase ventilation (CCV) system on a 6.7 Powerstroke routes pressurized gases from inside the engine block back into the intake manifold. A CCV delete kit bypasses this system entirely, venting those gases directly to the atmosphere instead. Owners install these kits primarily to reduce oil sludge buildup, lower intake manifold temperatures, and prevent the oil-in-coolant problems that plague some 6.7 engines.

This is a mechanical modification that changes how your engine breathes. It is not a bolt-on part that improves performance in the traditional sense — it is a workaround for a design issue that Ford addressed differently in later model years. Understanding what it does, what it costs, and what trade-offs come with it will help you decide whether it makes sense for your truck.

Key Takeaways

  • A CCV delete kit vents crankcase pressure to the atmosphere instead of routing it back into the intake, reducing oil sludge and intake manifold temperatures on 6.7 Powerstrokes.
  • The modification addresses a known issue where oil and coolant can mix inside the engine, but it does not prevent the root cause — it only reduces the conditions that make it worse.
  • Kits typically cost between $300 and $800 installed, depending on whether you do the work yourself or pay a shop.
  • Venting crankcase gases to the atmosphere means oil mist will exit your engine, which may require more frequent oil changes and can leave residue on engine components.
  • This modification may affect your truck's emissions certification and could trigger a check engine light if the PCM detects a missing CCV signal.

Why the 6.7 Powerstroke CCV system causes problems

Ford's 6.7L diesel engine, introduced in 2011, routes crankcase vapors through a cooler and back into the intake manifold — a closed-loop design meant to reduce emissions. Under normal conditions this works, but on high-mileage engines or those running higher boost levels, the system can allow oil to accumulate in the intake manifold and coolant passages. Over time, this oil mixes with coolant, creating a sludgy emulsion that clogs passages and reduces cooling efficiency.

The problem is not universal — some 6.7 engines run 200,000 miles without issue — but it is common enough that it appears in owner forums and shop discussions regularly. Ford redesigned the CCV system in later generations, but owners of 2011–2019 trucks are left managing the original design. A CCV delete does not fix the underlying cause; it reduces the conditions that make the problem worse by keeping oil vapors out of the intake system entirely.

How a CCV delete kit is installed

A typical CCV delete kit includes new hoses, fittings, a catch can (optional but recommended), and instructions for routing crankcase gases away from the intake manifold. Installation involves disconnecting the factory CCV hoses from the intake, blocking off the factory ports, and running new lines that either vent to atmosphere or feed into a catch can that you empty periodically.

The job takes two to four hours depending on engine bay layout and your familiarity with diesel engines. You will need basic hand tools, a hose cutter, and hose clamps. Some kits require drilling or tapping holes in the valve cover or block. If you are not comfortable working inside an engine bay, a diesel shop can handle the installation for $400 to $600 in labor, plus the cost of the kit itself.

Catch cans versus open venting

You have two routing options: vent crankcase gases directly to the atmosphere, or route them into a catch can that separates oil mist from the air before venting. An open vent is simpler and cheaper but means oil mist exits your engine continuously. A catch can captures most of that oil, which you drain periodically — usually every 5,000 to 10,000 miles depending on driving conditions.

Catch cans cost $100 to $300 and require maintenance, but they keep your engine bay cleaner and reduce the amount of oil leaving your engine. If you plan to keep the truck long-term and want to minimize oil consumption, a catch can is worth the extra cost and upkeep. If you are looking for the cheapest solution and do not mind more frequent oil changes, open venting works but will leave oily residue on engine components over time.

Cost and parts availability

CCV delete kits for the 6.7 Powerstroke range from $300 to $800 depending on the brand and whether a catch can is included. Popular manufacturers include Sinister Diesel, Wicked Diesel, and Merchant Automotive. Most kits are available through diesel performance shops and online retailers that specialize in Ford trucks.

A basic hose-and-fitting kit without a catch can typically costs $300 to $400. Adding a catch can brings the total to $500 to $800. Labor at a diesel shop adds another $400 to $600. If you install it yourself, you are paying only for parts, but you need to be comfortable working with engine bay plumbing and potentially drilling into aluminum components.

Oil consumption and maintenance changes

After a CCV delete, your engine will consume more oil because crankcase vapors are no longer being recycled back into the combustion chamber. How much more depends on engine condition, driving style, and boost levels. Expect to check your oil level more frequently — every 500 to 1,000 miles instead of every 1,000 to 2,000 miles — and plan on topping off between service intervals.

If you install a catch can, you will also need to drain it regularly. Most owners report draining 1 to 3 quarts of oil per 5,000 miles from the catch can, depending on how hard they drive. This is not a set-and-forget modification; it requires active maintenance to keep the engine running cleanly and to monitor oil levels.

Emissions and check engine light concerns

Removing the CCV system changes your truck's emissions profile. The factory system is part of Ford's certified emissions control equipment, and disconnecting it technically puts your truck out of compliance with EPA standards. In states with emissions testing, a CCV delete may cause your truck to fail inspection, depending on how the test is conducted and whether the inspector visually verifies the system.

Additionally, some 6.7 Powerstrokes have a CCV pressure sensor that feeds data to the engine control module. Deleting the system without addressing this sensor can trigger a check engine light. Quality kits include instructions for handling the sensor — either blocking the signal or tuning the PCM to ignore it — but you should confirm this before purchasing. If you are unsure, ask the kit manufacturer whether it addresses sensor issues for your specific model year.

Frequently Asked Questions

Will a CCV delete improve my fuel economy or horsepower?

No. A CCV delete is a maintenance-focused modification, not a performance upgrade. It may reduce intake manifold temperatures slightly, which could help in extreme conditions, but it will not change fuel economy or power output. Some owners report smoother idle after installation, but this is not may provide.

Can I reverse a CCV delete if I want to go back to stock?

Yes. The factory CCV components are still available from Ford, and reinstalling them is straightforward if you have kept the original hoses and fittings. However, if you have already blocked off factory ports or drilled holes, you may need to have those professionally sealed or plugged. Plan on $200 to $400 in parts and labor to return to stock.

Do I need to tune my truck after a CCV delete?

Not necessarily, but it depends on your truck's sensors and your goals. If your truck has a CCV pressure sensor and you want to avoid a check engine light, you will need to address it — either by blocking the signal or by having a tuner disable the monitor. If you are running a custom tune already, your tuner can incorporate the CCV delete into the tune. Stock trucks often run fine without tuning, but check with the kit manufacturer for your specific model year.

How often should I change my oil after a CCV delete?

Most owners stick to their factory service interval but check the oil level more frequently — every 500 to 1,000 miles instead of waiting until the next scheduled service. Some owners with catch cans switch to 4,000-mile intervals to account for higher oil consumption. Follow your truck's manual interval, but monitor levels closely and top off as needed.

Will a CCV delete prevent oil-in-coolant problems?

It will reduce the likelihood by keeping oil out of the intake manifold, but it is not a may provide. The root cause of oil-in-coolant issues on some 6.7 engines is a design flaw in how the cooling system interfaces with the engine block. A CCV delete makes the problem less likely to develop, but it does not eliminate the possibility entirely.