A delete kit removes emissions control parts from your 6.7 Cummins engine
A 6.7 Cummins delete kit removes or disables the diesel particulate filter (DPF), selective catalytic reduction (SCR) system, and exhaust gas recirculation (EGR) cooler from your engine. These are emissions control components that the engine uses to meet federal and state pollution standards. A delete kit typically comes with new exhaust piping, a tuner or ECU programmer, and instructions for installation.
The tuner reprograms your engine's computer to stop looking for these parts and to adjust fuel injection and timing accordingly. Without the tuner, your engine will throw fault codes and go into limp mode. Removing the hardware alone is not enough — the computer has to be told the parts are gone.
Most delete kits are sold for off-road or competition use only. Manufacturers and sellers include disclaimers stating the kit is not for street vehicles. This matters legally and practically, which is covered below.
Key Takeaways
- A delete kit removes emissions parts and requires a tuner to reprogram the engine computer, or the truck will run in limp mode.
- Using a delete kit on a street vehicle is illegal under federal law and most state laws, and can result in fines, failed inspections, and liability in accidents.
- Delete kits may improve fuel economy and engine performance in some conditions, but they also increase soot buildup, raise exhaust temperatures, and can damage the turbo and other engine components over time.
- Diesel shops and tuning companies vary widely in quality and honesty — some will refuse the work, some will do it without warning you of the legal and mechanical risks.
- If you own the truck for off-road use only and understand the mechanical trade-offs, you can have the work done, but you should document that the truck is not street-legal afterward.
Why people install delete kits and what they claim to gain
Owners install delete kits mainly to increase horsepower and torque, improve fuel economy, and reduce maintenance costs. The DPF and SCR systems require periodic cleaning or replacement, which is expensive. Removing them eliminates that cost. Some owners also report that the truck feels more responsive and that exhaust temperatures drop because the engine is not working as hard to meet emissions standards.
The tuner itself often promises 50 to 100 additional horsepower and 100 to 150 additional foot-pounds of torque, depending on the brand and tune level. Fuel economy gains are usually reported as 2 to 4 miles per gallon better, though real-world results vary based on driving style and load. These numbers come from manufacturer claims and owner reports, not independent testing.
Some owners also delete for reliability reasons, believing that emissions components fail and cause expensive repairs. This is partly true — DPF clogs and SCR heaters do fail — but deleting introduces its own reliability risks, covered in the next section.
The mechanical risks of running a deleted engine long-term
Removing emissions controls changes how the engine burns fuel and handles exhaust. Without the DPF, soot and ash that would have been trapped now stay in the oil, requiring more frequent oil changes. Without the EGR cooler, combustion temperatures rise, putting more stress on pistons, rings, and valve seats. Over time, this can lead to increased wear and carbon buildup inside the engine.
Exhaust gas temperature (EGT) also rises significantly without the DPF. Higher EGTs can damage the turbocharger, melt turbo seals, and warp exhaust manifolds. If you tow heavy loads or drive in hot climates, this risk is higher. Some owners report turbo failure within 50,000 to 100,000 miles of running deleted, though others report no problems at similar mileage.
The tuner itself can cause issues if it is poorly calibrated. A bad tune can cause rough idle, hard starting in cold weather, black smoke, and excessive fuel consumption. Switching tuners or reflashing the computer can sometimes fix this, but not always. Once you delete, you are committed to managing these risks yourself.
Federal and state law around delete kits on street vehicles
The Clean Air Act makes it illegal to remove or disable emissions control equipment on any vehicle registered for street use. The EPA can fine vehicle owners up to $37,500 per violation, and states can add their own penalties. Some states also impose fines on the shop that performs the work. This is not a gray area — it is a federal crime, not a traffic violation.
Your state's vehicle inspection will catch a delete. Inspectors scan the engine computer for fault codes and missing emissions components. A deleted truck will fail inspection and cannot be registered. Some states allow you to re-install the parts and have the computer reflashed to pass inspection, but this is expensive and defeats the purpose of the delete for many owners.
If you are in an accident and the other party's insurance company discovers the truck is deleted, they may deny your claim or reduce the payout, arguing that you were operating an illegally modified vehicle. Your own insurance may also deny coverage. This is a real financial risk, not just a theoretical one.
Off-road-only use is legal. If you own the truck solely for off-road competition or private land use and never register it for street driving, you can delete it without breaking federal law. However, you should document this — keep records showing the truck is not street-registered and not driven on public roads.
What to expect if you decide to have the work done
Finding a shop willing to do a delete is easier in some regions than others. Diesel tuning shops, truck customization shops, and some independent mechanics will do the work. Others will refuse on principle or liability concerns. Call ahead and ask directly — do not assume a shop will do it based on its website.
The cost ranges from $1,500 to $4,000 for parts and labor, depending on the kit brand, tuner quality, and whether you supply your own parts. Some shops charge more if they have to source the kit themselves. Labor usually takes 4 to 8 hours. You should get a written quote before dropping the truck off.
A reputable shop will explain the legal risks and mechanical trade-offs in writing. If a shop glosses over the legal side or promises the truck will pass inspection after a delete, that is a red flag. You want a shop that is honest about what you are doing and why.
After installation, the truck will run differently. Cold starts may be rougher, idle may be slightly uneven, and you may notice a change in throttle response. These are normal. If the truck runs very rough, black-smokes heavily, or has starting problems, the tune may need adjustment. Contact the shop or tuner to discuss a retune.
Alternatives if you want better performance without deleting
If you want more power and better fuel economy but do not want the legal and mechanical risks of a delete, there are other options. A tuner without a delete can optimize fuel injection and timing within the emissions system, gaining 20 to 40 horsepower without removing any hardware. This keeps the truck street-legal and does not void your warranty as severely.
Upgrading the turbocharger, intake, or exhaust (while keeping emissions parts) can also improve performance. These modifications are less dramatic than a delete but are legal and reversible. A quality aftermarket exhaust can add 10 to 20 horsepower and improve sound without removing the DPF.
If your main concern is maintenance cost, you can budget for DPF cleaning or replacement as needed. A DPF cleaning costs $300 to $800 and can extend the filter's life by 50,000 to 100,000 miles. This is cheaper than the long-term engine wear and turbo risk that comes with a delete.
Frequently Asked Questions
Will a delete kit make my truck fail inspection?
Yes. Inspectors scan for emissions fault codes and missing components. A deleted truck will fail and cannot be registered for street use. Some states allow you to reinstall the parts and reflash the computer to pass, but this is expensive and defeats the delete's purpose.
Can I delete my truck and then reinstall the parts if I sell it?
Technically yes, but it is difficult and expensive. Reinstalling the DPF, SCR, and EGR cooler requires new hardware, gaskets, and a reflash to factory settings. Shops charge $2,000 to $4,000 for this. Many deleted trucks are sold as-is to buyers who want them deleted, rather than being restored.
What happens if I get pulled over in a deleted truck?
A police officer cannot tell the truck is deleted just by looking at it. However, if you are in an accident or your truck is impounded, the engine computer can be scanned and the deletion discovered. At that point, you face EPA fines and state penalties. Insurance claims may also be denied.
Do I need to change my oil more often after a delete?
Yes. Without the DPF, soot stays in the oil longer. Most deleted truck owners change oil every 3,000 to 5,000 miles instead of the factory 7,500 to 10,000 mile interval. Using a quality diesel oil and checking levels frequently is important.
Can I delete just the DPF and keep the SCR and EGR?
Technically yes, but most kits remove all three systems because they are interconnected. Removing only the DPF while the computer still expects the SCR and EGR to work can cause fault codes and rough running. A tuner can be programmed to disable any combination, but most shops do a full delete or nothing.