A 5.7 Hemi MDS delete kit disables the Multi-Displacement System that shuts down half your engine's cylinders at highway speeds
The 5.7-liter Hemi engine in Dodge Ram trucks and Chrysler 300s comes with Multi-Displacement System (MDS) technology that automatically deactivates four of the eight cylinders when you're cruising at steady speeds on the highway. The system is designed to improve fuel economy by running on half the engine when full power isn't needed. A delete kit removes or bypasses the components that make this happen, forcing the engine to run all eight cylinders all the time.
When you install an MDS delete kit, your truck no longer switches between eight-cylinder and four-cylinder operation. Instead, it stays in full eight-cylinder mode regardless of driving conditions. This is a permanent modification that changes how your engine behaves and how much fuel it uses.
Key Takeaways
- MDS delete kits disable the system that shuts down four cylinders at highway speeds, forcing the engine to run all eight cylinders continuously.
- Owners install delete kits mainly to eliminate rough idle and hesitation that some Hemi engines experience when MDS engages or disengages.
- Deleting MDS will increase fuel consumption because your engine no longer runs on four cylinders during highway driving.
- Most delete kits cost between $300 and $800 in parts, but installation requires removing the intake manifold and reprogramming the engine computer.
- Deleting MDS may void your powertrain warranty and can trigger a check engine light if the computer detects disabled components.
How MDS works and why it causes problems
The Hemi's MDS system uses solenoids in the valve lifters to deactivate the intake and exhaust valves on cylinders 1, 4, 6, and 7. When the computer detects steady cruising at highway speeds, it cuts fuel injection and spark to those four cylinders while they continue to rotate passively inside the engine. The remaining four cylinders do all the work, and fuel consumption drops noticeably.
The problem is that the transition between eight-cylinder and four-cylinder operation—and back again—can feel rough. Owners report a noticeable hesitation or stumble when MDS engages, a slight vibration at idle when MDS is active, or a jolt when the system switches back to full eight-cylinder power during acceleration. These symptoms don't mean the engine is broken, but they're annoying enough that many owners want them gone.
Some Hemi engines also develop carbon buildup on the intake valves of the cylinders that MDS deactivates, because those cylinders aren't firing and cleaning themselves out. This can lead to rough idle or misfires over time. Deleting MDS prevents this buildup from occurring in the first place.
What a delete kit actually contains and how it works
An MDS delete kit typically includes a new intake manifold without the MDS solenoids, gaskets, seals, and sometimes a new valve cover. Some kits also include a computer tune that reprograms the engine control module to ignore MDS commands and disable the related diagnostic codes.
The installation process requires removing the intake manifold, disconnecting the MDS solenoid wiring, and installing the new manifold. Once the manifold is off, the technician also removes or plugs the MDS solenoid lines that run to the valve lifters. The engine computer then needs to be reprogrammed so it stops trying to set up a system that no longer exists—otherwise, the check engine light will stay on.
Some owners use a simpler approach: they disable MDS through a custom tune without replacing the manifold. This works by telling the computer to never set up MDS, even though the solenoids are still physically present. This method is cheaper but leaves unused components on the engine and doesn't address potential carbon buildup issues.
The real cost of deleting MDS: fuel economy
The most important consequence of an MDS delete is that your truck will use more fuel. The entire reason Chrysler engineered MDS was to improve highway fuel economy by running on four cylinders instead of eight during steady cruising. When you delete the system, you lose that benefit.
How much more fuel you'll use depends on your driving habits. If you spend most of your time on the highway at steady speeds, the difference will be noticeable—expect fuel economy to drop by 2 to 4 miles per gallon in highway driving. If you drive mostly in the city or do a lot of stop-and-go traffic, the impact will be smaller because MDS doesn't engage much in those conditions anyway.
Over the life of the truck, this increased fuel consumption adds up. A truck that gets 20 mpg instead of 23 mpg on the highway will cost significantly more to fuel over 100,000 miles. You should factor this ongoing cost into your decision before you commit to a delete.
Warranty and check engine light concerns
Installing an MDS delete kit will likely void your powertrain warranty. Chrysler considers disabling emissions and engine management systems to be a modification that removes their responsibility for engine reliability. If something goes wrong with your engine after the delete, the dealer may refuse to cover repairs under warranty.
If the delete is done incorrectly or incompletely, your check engine light will come on. This happens when the engine computer detects that the MDS solenoids are not responding or that the system is disabled but the computer is still trying to use it. A proper tune should prevent this, but a poorly done delete or one that only removes the manifold without reprogramming will leave you with a lit check engine light and a failed emissions test.
Some states require that your vehicle pass an emissions inspection to register it. A check engine light related to MDS deletion can cause your truck to fail that inspection, and you may be required to have the system restored before you can register it again.
Installation costs and labor time
The parts for an MDS delete kit range from $300 to $800 depending on whether you're buying just a tune, a new intake manifold, or a complete kit with all gaskets and seals. Labor costs vary widely by shop and region. Expect to pay $500 to $1,500 in labor for the full installation, which includes intake manifold removal, solenoid disconnection, manifold installation, and computer tuning.
Some shops offer MDS delete as a tune-only service for $200 to $400, which is cheaper upfront but doesn't address the physical solenoids or potential carbon buildup. If you choose this route, understand that you're only disabling the system in software, not removing the hardware.
Installation typically takes 4 to 6 hours at a shop. If you have mechanical experience and the right tools, you can do the manifold swap yourself and send the computer to a tuning shop, which can reduce your total cost. However, this is not a beginner job—the intake manifold removal requires careful handling of gaskets and seals, and mistakes can lead to vacuum leaks or coolant leaks.
Alternatives to a full MDS delete
If you're experiencing MDS-related hesitation or rough idle but don't want to commit to a full delete, you have other options. A custom tune that smooths out the MDS transition without fully disabling it can reduce the harshness you feel when the system engages. This keeps some of the fuel economy benefit while making the system less noticeable.
You can also address specific symptoms without deleting MDS entirely. If carbon buildup is causing rough idle, a professional fuel system cleaning or intake valve cleaning can help. If the hesitation is severe, it might indicate a problem with the MDS solenoids themselves, and replacing just the faulty solenoids is cheaper than a full delete.
Another option is to live with MDS as-is. Many owners find that the system becomes less noticeable over time, and the fuel economy savings during highway driving do add up. If your truck is still under warranty, this is often the safest choice.
Frequently Asked Questions
Will deleting MDS make my truck faster?
No. MDS delete does not increase horsepower or torque. Your truck will feel the same during acceleration because it's already running all eight cylinders when you step on the gas. The only change is that it will also run all eight cylinders during steady highway cruising, when it previously ran on four.
Can I turn MDS back on after I delete it?
If you did a tune-only delete, yes—a tuner can reprogram your computer to re-enable MDS. If you replaced the intake manifold with one that doesn't have MDS solenoids, you would need to install the original manifold and solenoids again, which is expensive and rarely done. Most people who delete MDS keep it deleted.
Will a delete kit cause my truck to fail emissions testing?
It depends on your state's emissions standards and whether the delete is done cleanly. If the tune is done properly and doesn't trigger a check engine light, your truck should pass. However, if the delete leaves a pending or active code related to MDS, you will fail. Some states also have stricter rules about engine modifications, so check your local requirements before proceeding.
Is MDS delete legal?
MDS delete is legal to own and drive in most states, but it may not be legal to sell a vehicle with an MDS delete in some jurisdictions. Check your state's vehicle modification laws. Additionally, if your truck is still under manufacturer warranty, the dealer may refuse service on engine-related issues after a delete is discovered.
What's the difference between a manifold delete and a tune-only delete?
A manifold delete physically removes the MDS solenoids by installing a new intake manifold without them. A tune-only delete keeps the original manifold and solenoids but tells the computer to ignore them. Manifold delete is more thorough and prevents carbon buildup, but costs more. Tune-only is cheaper and reversible, but leaves unused hardware on the engine.