What the 2022 Highlander rear view setup includes
The 2022 Toyota Highlander comes with a standard backup camera that displays on the center touchscreen when you shift into Reverse. The camera shows a wide-angle view of what is directly behind the vehicle, with dynamic guidelines that move as you turn the steering wheel to help you judge your path.
All trim levels include an 8-inch or 10.5-inch touchscreen (depending on which infotainment system your model has), and the backup camera feed appears automatically on whichever screen is installed. The camera itself is mounted on the liftgate, centered above the license plate, and activates the moment Reverse is selected.
The Highlander also has a standard power-adjustable heated outside mirror on the driver's side and a power-adjustable heated mirror on the passenger side. These mirrors fold inward when you lock the vehicle, which is useful in tight parking situations or car washes.
Key Takeaways
- The backup camera is standard on all 2022 Highlander models and displays on your center touchscreen when you shift into Reverse.
- Dynamic guidelines on the camera feed move with your steering input to show you the projected path of the vehicle.
- Both outside mirrors are heated and power-adjustable, with the driver's mirror including memory settings on higher trims.
- The camera lens can accumulate dirt, mud, or condensation, which reduces image clarity and requires occasional cleaning.
- If the camera image is distorted, frozen, or missing, the problem is usually a loose connector or a blown fuse rather than a failed camera unit.
How the backup camera guidelines work
The dynamic guidelines on the 2022 Highlander's backup camera are colored lines that appear on the screen to show you where the vehicle will travel based on your current steering angle. As you turn the wheel left or right, the lines shift to reflect that change in real time.
The center line typically runs straight back from the vehicle's center, and the outer lines show the edges of the vehicle's path. This setup helps you avoid obstacles to the sides when reversing at an angle into a parking space. The guidelines are most useful when you are backing slowly and can watch the screen continuously.
Keep in mind that the camera shows a fixed wide-angle view, so objects very close to the bumper or directly underneath the vehicle may not appear on screen. The guidelines are a reference tool, not a replacement for checking your mirrors and looking over your shoulder.
Cleaning and maintaining the backup camera lens
The backup camera lens on the 2022 Highlander is exposed to road spray, mud, and weather, so it can become cloudy or dirty over time. A cloudy image usually means the lens needs cleaning rather than indicating a camera failure.
To clean the lens, use a soft microfiber cloth and a small amount of water or glass cleaner. Wipe gently in circular motions and dry with a clean part of the cloth. Avoid abrasive materials or high-pressure water spray, which can scratch the lens or force water into the camera housing.
If condensation appears inside the lens (visible as fogging that does not wipe away from the outside), the camera housing may have a small leak. This is less common but does occur, especially after heavy rain or car washes. In that case, the camera unit itself may need replacement, which typically costs between $200 and $400 in parts and labor at a Toyota dealership.
Outside mirror features and adjustments
Both outside mirrors on the 2022 Highlander are power-adjustable, meaning you can move them up, down, left, and right using controls on the driver's door panel. The controls are usually a small joystick or directional pad labeled with an arrow pointing to a mirror symbol.
On higher trim levels (LE and above), the driver's mirror includes memory settings that store your preferred position. When you unlock the vehicle, the mirror automatically moves to the saved position. This is useful if multiple people drive the Highlander and have different mirror preferences.
Both mirrors are also heated, which means they have a small heating element that clears frost or condensation. Press the mirror defrost button (usually located near the mirror controls) to set up the heating. The heating typically runs for 10 to 15 minutes and then shuts off automatically to save battery power.
What to do if the backup camera is not working
If the backup camera image does not appear when you shift into Reverse, or if the image is frozen or distorted, start by checking the simplest causes first. Make sure the camera lens is clean and free of dirt or condensation. If the lens is clear but the image is still missing, check the fuse box.
The backup camera on the 2022 Highlander is protected by a dedicated fuse, usually located in the interior fuse box under the dashboard on the driver's side. Consult your owner's manual for the exact fuse location and amperage. If the fuse is blown (the wire inside will be broken or blackened), replace it with a new fuse of the same amperage.
If the fuse is intact and the lens is clean, the problem may be a loose electrical connector at the camera or at the infotainment system. This is more involved to diagnose and repair, and typically requires a visit to a Toyota dealership or a may have access to independent shop. Do not attempt to disassemble the liftgate or touchscreen yourself, as this can cause additional damage.
Mirror adjustment tips for better visibility
Proper mirror adjustment reduces blind spots and makes reversing and lane changes safer. For the driver's side mirror, adjust it so that you can just barely see the side of your own vehicle on the right edge of the mirror. This positioning lets you see the area directly beside and behind the vehicle without having to turn your head as far.
For the passenger side mirror, adjust it slightly more outward than the driver's mirror so that you can see the lane beside you and the area behind the vehicle. The exact angle depends on your height and seating position, so take time to find what works for you before you drive.
Remember that even with properly adjusted mirrors and a backup camera, you should always turn to look over your shoulder before reversing, especially in parking lots or residential areas where small children or pets may be present.
Frequently Asked Questions
Can I use the backup camera while the vehicle is parked?
No. The backup camera only activates when the transmission is in Reverse. Once you shift back to Park or Drive, the camera feed disappears from the screen. This is a safety design to prevent distraction while the vehicle is moving forward.
What if the mirror glass is cracked or damaged?
You can replace just the mirror glass without replacing the entire mirror assembly. Toyota sells replacement mirror glass inserts that snap into the existing housing. A dealership can install one in about 30 minutes, or you can do it yourself if you are comfortable with the process. The glass itself typically costs $50 to $100.
Do the heated mirrors work in all weather?
The heated mirrors work best in light frost or condensation. In heavy snow or ice, they may not fully clear the mirror surface on their own. You may need to manually remove heavy snow or ice before activating the heating function. Never scrape the mirror glass with a sharp object, as this will scratch the reflective coating.
Can I add a backup camera if my Highlander does not have one?
All 2022 Highlander models come standard with a backup camera, so this is not a concern for that model year. If you own an older Highlander without a backup camera, aftermarket units are available, but installation requires running wiring through the liftgate and integrating with your existing infotainment system, which can be complex and costly.
Why does the backup camera image sometimes look distorted at the edges?
The backup camera uses a wide-angle lens to show as much area as possible behind the vehicle. Wide-angle lenses naturally create some edge distortion, which is normal and expected. This distortion does not affect the usefulness of the camera for reversing. If the entire image is blurry or severely warped, the lens may be dirty or the camera may be misaligned.