What a 2017 L5P delete kit removes from your truck
A delete kit for a 2017 L5P Duramax diesel removes or bypasses the emissions control systems that Chevrolet and GMC installed on that engine. The L5P is the sixth-generation Duramax, used in 2017–2023 Silverado and Sierra trucks. A delete kit typically removes or disables the diesel particulate filter (DPF), selective catalytic reduction (SCR) system, and exhaust gas recirculation (EGR) cooler.
The DPF traps soot from the exhaust and periodically burns it off in a process called regeneration. The SCR system injects diesel exhaust fluid (DEF) into the exhaust to reduce nitrogen oxides. The EGR cooler recirculates hot exhaust back into the engine to lower combustion temperatures. All three systems add weight, cost, and maintenance burden to the truck.
Owners who install delete kits do so to increase engine power, improve fuel economy, reduce maintenance costs, and eliminate the need to buy and refill DEF. The trade-off is that the truck will no longer meet federal emissions standards and cannot pass emissions testing in states that require it.
Key Takeaways
- A delete kit removes the DPF, SCR, and EGR systems that control emissions on the 2017 L5P Duramax engine.
- Owners report gains of 50 to 100 horsepower and 100 to 150 pound-feet of torque, plus better fuel economy and lower maintenance costs.
- Deleted trucks cannot pass emissions testing and are illegal to operate on public roads in states with emissions programs.
- Installation costs range from $2,000 to $5,000 depending on the shop and whether you also reprogram the engine computer.
- You will need a custom tuning file loaded onto the engine control module to make the truck run properly after the hardware is removed.
What gets physically removed or modified
The DPF is a large canister mounted under the truck behind the rear axle. Removing it means cutting out the component and welding or bolting in a straight pipe. Some kits use a bolt-on adapter that bypasses the filter while leaving the housing in place, which is less noticeable during inspection but still requires the engine computer to be reprogrammed so it stops trying to regenerate a filter that is no longer there.
The SCR system includes a tank mounted in the truck bed or under the frame that holds DEF, plus injectors and sensors in the exhaust. A delete kit removes the DEF tank, plugs the injectors, and disables the SCR heater and sensors. The EGR cooler is a heat exchanger bolted to the engine block; deleting it means removing the cooler and the lines that feed it, then blocking off the ports on the engine.
After the hardware is removed, the engine computer still contains programming that monitors these systems and triggers warning lights if it detects they are missing. That is why a custom tuning file—loaded by a diesel shop using a laptop and a wiring harness—is essential. The tune tells the computer to ignore the missing sensors and systems so the truck runs without fault codes.
Power and fuel economy gains from a delete
Owners and shops report that a stock 2017 L5P makes approximately 445 horsepower and 910 pound-feet of torque from the factory. After a delete and tune, that same engine typically produces 500 to 550 horsepower and 1,000 to 1,050 pound-feet of torque. The gains come from removing the weight and restriction of the DPF, lowering exhaust temperatures by deleting the EGR cooler, and allowing the engine to run a more aggressive fuel map without the SCR system fighting combustion efficiency.
Fuel economy improvements vary depending on how the truck is driven. Highway cruising often shows a 2 to 4 mile-per-gallon improvement because the engine is more efficient and the truck weighs less. Towing can show similar or larger gains because the engine has more power and does not have to work as hard to pull the same load. City driving and idling show smaller improvements because the DPF regeneration cycle—which burns fuel to clean the filter—is no longer happening.
The cost of DEF, which a stock L5P requires year-round, is also eliminated. A truck that tows or idles frequently can spend $500 to $1,000 per year on DEF. Over the life of the truck, that adds up, though it must be weighed against the upfront cost of the delete kit and tune.
Maintenance savings and the cost of the delete itself
A stock L5P requires DPF cleaning or replacement every 150,000 to 200,000 miles, which costs $800 to $2,000 at a dealer. The EGR cooler is a common failure point and costs $1,500 to $3,000 to replace. SCR injectors can clog and cost $500 to $1,200 to replace. A deleted truck eliminates all three of these maintenance items.
The delete kit itself—the physical components like the DPF bypass pipe or adapter, EGR block-off plates, and DEF tank removal hardware—costs $500 to $1,500 depending on the brand and whether you buy individual pieces or a complete kit. Labor to install the kit and reprogram the engine computer typically runs $1,500 to $3,500 at a diesel shop. Total cost is usually $2,000 to $5,000.
Some owners do the hardware removal themselves if they have welding equipment and mechanical skill, then pay a shop only for the tuning, which reduces the total cost to $1,000 to $2,000. However, a poor weld or improper installation can cause exhaust leaks, overheating, or engine damage, so many owners choose to have a shop handle the entire job.
Legal status and emissions testing
Deleting a diesel truck is illegal under federal law. The Clean Air Act prohibits removing or disabling emissions control equipment on any vehicle, and the EPA can fine owners up to $37,500 per vehicle. Many states with emissions testing programs—including California, New York, and others in the Northeast—will fail a deleted truck during inspection and can refuse to register it.
States without emissions testing programs do not have a mechanism to catch a deleted truck during registration, but the truck is still illegal to operate on public roads. Some owners delete their trucks anyway, accepting the legal risk. Others delete only the DPF and EGR while keeping the SCR system functional, which reduces emissions violations but is still technically illegal.
Insurance companies are not required to cover damage or liability if a truck is modified illegally. Some policies include clauses that void coverage if the vehicle has been altered in ways that violate federal law. Before deleting a truck, contact your insurance agent to understand whether your policy will still cover you.
Tuning options and engine computer reprogramming
After the hardware is removed, the engine control module must be reprogrammed with a custom tune that disables emissions monitoring and adjusts fuel injection, turbo boost, and timing to match the new configuration. There are two main approaches: custom tuning and off-the-shelf tuning files.
Custom tuning is done by a diesel shop that connects a laptop to your truck's engine computer and writes a tune specific to your truck's hardware, fuel quality, and intended use. This costs $800 to $1,500 and produces the best results because the tuner can adjust parameters for your exact setup. Off-the-shelf tunes are pre-written files sold by companies like EFI Live or HP Tuners; you buy the file and a shop loads it onto your truck for $300 to $600. These tunes are less tailored but cost less and work for most L5P deletions.
Some tuning companies offer multiple tune levels—a mild tune for daily driving, a performance tune for towing, and an aggressive tune for maximum power. You can usually switch between them if you have the tuning software, though not all shops allow this.
Resale value and long-term ownership considerations
A deleted truck is harder to sell because the next owner inherits the legal liability and the inability to pass emissions testing. Private buyers who want a deleted truck will pay less because they know they cannot register it in states with testing. Dealers typically will not buy a deleted truck at all, or will offer significantly less than market value.
If you plan to keep the truck long-term and do not live in a state with emissions testing, the delete can make financial sense because you avoid $3,000 to $5,000 in maintenance costs over the truck's life. If you plan to sell within five years or may move to a state with emissions testing, the delete becomes a liability that reduces resale value by $2,000 to $5,000.
Some owners have their trucks re-tuned back to stock or have the DPF reinstalled before selling, but this is expensive and does not always restore the truck to factory condition. The safest approach is to keep the truck until you no longer need it if you delete it.
Frequently Asked Questions
Will a delete kit damage my engine?
No, if the work is done correctly. Removing the DPF and EGR cooler actually reduces engine temperatures and stress. The key is having a proper tune loaded so the engine computer does not run too aggressively. A bad tune or poor installation can cause overheating or detonation, so choose a reputable shop.
Can I still tow with a deleted truck?
Yes, and towing often improves because the engine has more power and does not have to work as hard. The truck will run cooler and more efficiently under load. Make sure the tune is set up for towing if you plan to pull heavy loads regularly.
What happens if I get caught with a deleted truck?
In states with emissions testing, the truck will fail inspection and cannot be registered. In states without testing, there is no inspection mechanism, but the truck is still illegal. The EPA can fine you up to $37,500 if they inspect your truck and find it has been deleted. Most owners are not caught, but the risk exists.
Can I reverse a delete and put the emissions systems back on?
Partially. You can have the tune reverted to stock and reinstall the DPF, but the EGR cooler and SCR system are harder to restore because they require new parts and hoses. It is possible but expensive and does not always return the truck to factory condition. Most owners do not reverse a delete.
How long does a delete installation take?
Hardware removal and installation typically takes one to three days depending on the shop's schedule and whether welding is required. Tuning usually takes a few hours. Most shops can complete a full delete in three to five business days if you drop the truck off.