A delete kit removes emissions equipment from your 2017 F-250, but it voids your warranty and breaks emissions law
A delete kit for a 2017 F-250 removes or disables the diesel particulate filter (DPF), selective catalytic reduction (SCR) system, and exhaust gas recirculation (EGR) cooler. Owners install these kits to reduce maintenance costs, improve fuel economy, and increase engine power. The trade-off is when ready: you lose your factory warranty on the engine and emissions systems, your truck becomes illegal to drive on public roads in most states, and you face potential fines if caught.
The 2017 F-250 Super Duty diesel engine (6.7L Power Stroke) was designed to meet federal emissions standards. The DPF traps soot, the SCR system uses diesel exhaust fluid (DEF) to reduce nitrogen oxides, and the EGR cooler recirculates exhaust gas to lower combustion temperatures. All three systems add cost and complexity. A delete kit bypasses them entirely, which is why some owners pursue it—but federal law prohibits this modification on any vehicle driven on public roads.
Key Takeaways
- A delete kit removes the DPF, SCR, and EGR cooler, which costs between $800 and $2,500 in parts and labor depending on the shop and whether you do it yourself.
- Deleting these systems voids your powertrain warranty when ready and makes your truck non-compliant with the Clean Air Act, exposing you to EPA fines up to $37,500 per vehicle.
- You will see better fuel economy and more power, but you also lose the ability to pass emissions testing in states that require it, and you cannot legally sell the truck without disclosing the modification.
- The 2017 F-250 DPF is prone to clogging and regeneration issues, which is the main reason owners consider deletion, but Ford warranty coverage and aftermarket cleaning services exist as legal alternatives.
What each component does and why owners want it removed
The diesel particulate filter (DPF) is a ceramic honeycomb that collects soot from the exhaust. When it fills up, the engine triggers a regeneration cycle—the truck burns extra fuel to heat the filter and incinerate the trapped particles. This process is loud, hot, and reduces fuel economy during the cycle. On the 2017 F-250, DPF clogs are common, especially in trucks driven mostly at low speeds or in stop-and-go traffic. A clogged DPF triggers a check engine light and forces the truck into limp mode, cutting power and speed.
The selective catalytic reduction (SCR) system injects diesel exhaust fluid (DEF) into the exhaust stream to convert nitrogen oxides into harmless nitrogen and water. DEF costs money to buy and refill, and the SCR system itself can fail. Owners dislike the extra maintenance and the cost of DEF, which runs $5 to $10 per gallon.
The exhaust gas recirculation (EGR) cooler takes hot exhaust gas and cools it before sending it back into the engine. This lowers combustion temperature and reduces emissions, but the cooler can leak coolant into the exhaust, causing overheating and engine damage. EGR cooler failures on the 2017 F-250 are not rare, and replacement under warranty can take weeks.
Removing all three systems eliminates these maintenance headaches and frees up engine power that would otherwise go into running the emissions equipment. Owners report 5 to 10 percent better fuel economy and noticeable gains in horsepower and torque. For trucks used off-road or on private property only, the appeal is clear.
Delete kit cost and installation labor
A complete delete kit for the 2017 F-250 costs between $800 and $2,500 in parts alone, depending on the brand and whether you choose a DPF-only delete or a full DPF, SCR, and EGR delete. Popular brands include ATS, Flo-Pro, and Wicked Diesel. Some kits include a tuner (a device that reprograms the engine computer to remove emissions codes), while others require you to buy the tuner separately, which adds another $400 to $800.
Installation labor ranges from $500 to $1,500 at a diesel shop, depending on how much welding and exhaust work is involved. If you do the work yourself, you need a lift, basic welding equipment, and mechanical skill. The job typically takes 8 to 16 hours. Many diesel shops will not install a delete kit because of the legal liability, so you may have to search for a shop that specializes in off-road or competition trucks.
Total cost for a professional installation is usually $1,300 to $4,000. If you do it yourself and already own the tools, you can cut that to $800 to $2,500 in parts and tuning.
Legal and warranty consequences
Deleting emissions equipment is illegal under the Clean Air Act. The EPA prohibits the removal or defeat of any emissions control device on vehicles intended for use on public roads. Penalties include fines up to $37,500 per vehicle for the owner and up to $43,280 per vehicle for a shop that performs the work. States with emissions testing programs (California, New York, Massachusetts, and others) will fail your truck during inspection, and you cannot register it without passing.
Your Ford warranty is void the moment you install a delete kit. Ford's warranty covers the engine, transmission, and emissions systems for three years or 36,000 miles (whichever comes first). Once you modify the emissions system, Ford will deny any claim related to the engine or fuel system, even if the failure is unrelated to the delete. If your turbo fails or your fuel injectors go bad, you pay out of pocket.
When you sell the truck, you are required by law to disclose the modification to the buyer. This significantly reduces resale value because most buyers either cannot register the truck in their state or do not want the legal risk. Some states require the truck to be restored to original emissions specifications before it can be sold, which means paying to have the DPF, SCR, and EGR cooler reinstalled.
Legal alternatives to deletion
If your 2017 F-250 has a clogged DPF or failing EGR cooler, you have options that do not involve deletion. Ford warranty coverage is the first: if the truck is still under the three-year, 36,000-mile powertrain warranty, Ford will replace a failed DPF, EGR cooler, or SCR system at no cost. Check your warranty status with a Ford dealer before considering deletion.
If your warranty has expired, aftermarket DPF cleaning services can restore a clogged filter without removing it. Companies like DPF Medic and local diesel shops offer cleaning for $300 to $600, which is far cheaper than a delete kit and keeps your truck legal. A cleaned DPF usually lasts another 50,000 to 100,000 miles depending on your driving.
For the EGR cooler, you can replace it with an updated Ford part (the 2017 cooler design was improved in later model years) or install an aftermarket cooler designed to be more reliable. These options cost $1,000 to $2,000 installed but avoid the legal and warranty problems of deletion.
If you want more power and better fuel economy without breaking emissions law, a tuning service can optimize your engine parameters within legal limits. Reputable tuners like EFI Live and Smarty Tuning offer performance tunes that do not disable emissions equipment. These tunes cost $400 to $800 and can add 30 to 50 horsepower without voiding your warranty (though some dealers may still deny claims if they suspect tuning caused the failure).
When deletion makes sense and when it does not
Deletion is a practical choice only if your 2017 F-250 is used exclusively off-road or on private property and will never be registered or driven on public roads. If you own a ranch, use the truck for competition, or plan to keep it as a dedicated work vehicle on your own land, the legal risk is minimal. In that case, the fuel economy and power gains justify the cost and warranty loss.
Deletion does not make sense if you drive your truck on public roads, plan to sell it later, or live in a state with emissions testing. The fines, warranty loss, and resale hit far outweigh the benefits of slightly better fuel economy. A clogged DPF is an inconvenience, not a reason to break federal law.
Frequently Asked Questions
Will a delete kit make my 2017 F-250 fail emissions testing?
Yes. States that require emissions testing will fail your truck because the DPF and SCR system are no longer present. You cannot register the truck in those states without restoring the original emissions equipment.
Can I hide a delete kit from Ford during warranty service?
No. Ford technicians can see that the DPF, SCR, and EGR cooler are missing during a basic inspection. Ford will deny any warranty claim on the engine or fuel system once they discover the modification. Attempting to hide it is not worth the risk.
What is the difference between a delete kit and a tuner?
A delete kit physically removes emissions equipment. A tuner reprograms the engine computer to change how the engine runs. A tuner alone does not remove the DPF or SCR system, so it is legal, though some dealers may still deny warranty claims if they suspect tuning caused a failure.
How much horsepower will I gain from a delete kit?
Most owners report 30 to 80 additional horsepower and 50 to 150 additional foot-pounds of torque, depending on the tuner and how aggressively it is programmed. Actual gains vary based on your truck's condition and driving habits.
Can I reinstall the DPF later if I need to sell my truck?
Yes, but it is expensive and time-consuming. You would need to buy a new DPF, SCR system, and EGR cooler, and have them professionally installed and tuned back to factory specifications. This can cost $3,000 to $5,000 and may not fully restore your truck's resale value because buyers will know it was deleted.