The oil life reset clears the service reminder after you change your oil
The 2013 Ford Escape displays an oil life percentage on your dashboard—usually showing somewhere between 100% (just changed) and 0% (time to change). When you perform an oil change, that percentage does not reset itself. You have to manually reset the monitor through the instrument cluster, or it will keep counting down and trigger a service light even though your oil is fresh.
The reset process takes about 30 seconds and requires no tools or computer scanner. You do it from the driver's seat using the steering wheel controls and the information display between your speedometer and tachometer.
Key Takeaways
- The oil life monitor on a 2013 Escape resets through the steering wheel controls and the information display, not through a menu buried in the infotainment system.
- You must reset the monitor after every oil change, whether you do it yourself or have a shop perform the service.
- If you do not reset it, the oil change light will illuminate at 0% oil life even though your oil is new, and you will have no way to know when the next change is actually due.
- The reset works the same way whether your Escape has a manual or automatic transmission.
Steps to reset the oil life monitor
Start with the engine off and the ignition in the ON position (do not start the engine). Look at the information display in your instrument cluster—the small screen between the speedometer and tachometer that shows trip distance, fuel economy, and other data.
Use the left steering wheel controls to navigate to the oil life screen. Press the up or down arrow on the left side of the steering wheel until you see "Oil Life" displayed. Once it appears, press and hold the right steering wheel button (the one marked with a checkmark or OK symbol) for several seconds. The display will show a message confirming the reset—usually something like "Oil Life Reset" or "Service Interval Reset." Release the button once you see the confirmation.
Turn the ignition off, then back on to verify the reset took. The oil life should now read 100% or close to it. If it still shows a low percentage, repeat the process—sometimes the display needs a second attempt to register the reset.
Why the monitor matters for your engine
The oil life monitor estimates how much longer your current oil can protect your engine based on your driving habits, engine temperature, and how hard you drive. It is not straightforward counting down days or miles. A vehicle driven mostly on highways in cool weather will show a slower countdown than one driven in stop-and-go city traffic or towing.
When oil life reaches 0%, the monitor is telling you the oil has accumulated enough contaminants and lost enough of its protective additives that it should be changed. Ignoring a 0% reading and continuing to drive risks sludge buildup, increased engine wear, and potential damage to internal components. Resetting the monitor after an oil change tells the system you have removed the old, degraded oil and installed fresh oil with full additive protection.
What happens if you forget to reset
If you change your oil but do not reset the monitor, the countdown continues from wherever it was. You might have just installed fresh oil, but the display will still show 15% or 8% life remaining. The service light will come on when it reaches 0%, and you will have no way to know whether that light means your oil is actually due for a change or whether it is a false alarm from a monitor you forgot to reset.
This creates a real problem: you lose the ability to trust the system. If the light comes on and you are unsure whether you reset it last time, you have to guess whether to change the oil or ignore the light. Over time, guessing wrong can mean either wasting money on unnecessary oil changes or running your engine on degraded oil.
Resetting after a DIY oil change versus a shop service
If you change the oil yourself, you are responsible for the reset. Many owners forget this step because they focus on draining the old oil, installing the new filter, and pouring in fresh oil—then assume the job is done. The reset is the final step, and it takes 30 seconds.
If you have the oil changed at a dealership or independent shop, ask them to confirm they reset the monitor before you leave. Most shops do this automatically, but not all. A quick way to verify: look at the oil life percentage on your dashboard before you drive away. If it shows 100% or very close to it, the reset was done. If it shows anything lower, ask them to reset it while you wait.
Resetting on 2013 Escapes with different dashboard layouts
The 2013 Escape came with two different instrument cluster designs depending on trim level and options. Most models use the steering wheel controls method described above. Some higher-trim models with the larger color information display may have a menu-based reset accessed through the infotainment system, but the steering wheel method works on all 2013 models.
If the steering wheel method does not work on your specific Escape, check your owner's manual for the exact steps—the manual will have a section titled "Oil Change Indicator" or "Service Interval Reset" with illustrations. You can also read the manual for free from Ford's website using your vehicle identification number (VIN).
Frequently Asked Questions
Can I reset the oil life monitor while the engine is running?
No. The reset only works with the ignition in the ON position and the engine off. If you try while the engine is running, the steering wheel controls will not access the reset function. Turn off the engine, leave the ignition on, and try again.
What if the oil life monitor keeps showing 0% even after I reset it?
First, verify you held the right steering wheel button long enough—at least three to five seconds. If you released it too quickly, the reset may not have registered. Try again and hold longer. If it still shows 0% after a second attempt, the monitor itself may have a fault. Have a Ford dealership scan the vehicle for diagnostic trouble codes related to the oil life system.
Does the oil life reset affect my maintenance schedule?
No. Resetting the monitor does not change when your oil actually needs to be changed. It straightforward clears the display so the system can begin counting down from 100% again. You should still follow Ford's recommended oil change intervals in your owner's manual, which vary based on your driving conditions and the type of oil you use.
Will the reset work if my battery is dead?
If your battery is completely dead, the instrument cluster will not power on, so you cannot access the reset function. Once you charge or replace the battery and the cluster powers back up, the oil life percentage will still be whatever it was before the battery died. You can then reset it normally using the steering wheel controls.