Wix oil filters are a mid-range choice sold at most auto parts stores and fit thousands of vehicle models
Wix is a brand owned by Mann+Hummel, a German filtration company, and makes oil filters for passenger cars, trucks, and some light commercial vehicles. You'll find them at AutoZone, O'Reilly, NAPA, Walmart, and Amazon, usually priced between $8 and $20 depending on your vehicle's engine size. Wix filters use a synthetic media blend in most models and come with an anti-drainback valve to prevent oil starvation when you start the engine cold.
The brand has been in the market since the 1930s and holds a solid reputation among independent mechanics and DIY owners. Wix does not make filters exclusively for one manufacturer — they sell across the aftermarket, meaning you can use them on a Ford, Honda, Chevy, or other brand without voiding a warranty, as long as you follow your owner's manual's oil change interval. The filters are manufactured in multiple countries including the United States, Mexico, and Europe, so country of origin varies by part number.
Key Takeaways
- Wix oil filters fit most common vehicles and cost less than OEM filters from the dealership but more than the cheapest store brands.
- The filter's anti-drainback valve prevents oil from draining out of the filter when the engine is off, protecting your engine at startup.
- You can identify the correct Wix filter for your vehicle by engine size and year, which the parts store can look up using your vehicle identification number (VIN).
- Wix filters should be changed at the interval listed in your owner's manual, typically every 3,000 to 10,000 miles depending on oil type and driving conditions.
How Wix filters compare to OEM and budget alternatives
An OEM filter — the one made by your vehicle's manufacturer — is usually the most expensive option, often $15 to $30 more than Wix. OEM filters are engineered specifically for your engine and may use different media or bypass valve settings. However, they are not always measurably better at protecting your engine over the life of an oil change. Wix filters meet or exceed industry standards (ISO 4572 for passenger car filters) and have been used as OEM filters by some manufacturers, so the performance difference is often small.
Budget store brands — often labeled with the retailer's own name — typically cost $5 to $10 and use similar media to Wix but may have less robust construction or a lower micron rating, meaning they filter out fewer particles. The trade-off is cost versus longevity and particle capture. Wix sits in the middle: better filtration than the cheapest option, lower cost than OEM, and widely available. For most owners doing routine maintenance, Wix is a practical choice that does not require you to special-order from a dealership.
Finding the right Wix filter for your vehicle
The easiest way to find your filter is to give the parts store your vehicle identification number (VIN), which you'll find on the driver's side of the dashboard or on your registration. The store's computer will pull up the correct Wix part number for your engine size and year. If you prefer to search online, Wix's website has a filter finder tool where you enter your vehicle's year, make, and model.
Do not assume all filters for the same brand fit the same way — a 2015 Honda Civic and a 2015 Honda Accord use different filters because their engines are different sizes. The part number on the box will be specific to your engine. If you're unsure, ask the parts counter to confirm the filter threads onto your engine correctly and that the bypass valve pressure is appropriate for your oil viscosity (the thickness rating, like 5W-30).
What the anti-drainback valve does and why it matters
The anti-drainback valve is a one-way flapper inside the filter that lets oil flow into the filter when the engine runs but prevents oil from draining back into the pan when the engine shuts off. This matters because when you start a cold engine, the oil pump needs a few seconds to pressurize and push oil through the filter. Without the valve, the filter would be empty and the engine would run briefly without filtration.
Wix filters include this valve in most models. Some very cheap filters omit it or use a weak version. If you're changing your own oil, you'll notice the valve when you unscrew the old filter — oil will drain out, but not all of it. That's normal and expected. When you install the new Wix filter, hand-tighten it until the rubber gasket touches the engine block, then turn it another three-quarter turn. Do not use a wrench — over-tightening can damage the gasket and cause leaks.
Oil change intervals and filter lifespan
A Wix filter lasts as long as your oil does. If your owner's manual says to change oil every 5,000 miles, the filter comes out at 5,000 miles too. Modern synthetic oils allow longer intervals — sometimes 7,500 or 10,000 miles — and the filter must be changed at that same interval. Wix filters are rated to handle the full interval without clogging, assuming you use the correct oil grade and change it on schedule.
Driving conditions matter. If you tow, idle frequently, or drive in dusty environments, your manual may recommend shorter intervals. Check the owner's manual for the "severe driving" schedule if that applies to you. Changing the filter more often than recommended does no harm and costs little, but changing it less often than recommended can allow dirt to accumulate and reduce engine life. The filter is cheap insurance compared to engine repair.
Installation and common mistakes to avoid
If you're changing the filter yourself, warm up the engine first so the oil flows more easily, then let it cool for a few minutes before loosening the filter. Have a drain pan ready — the filter holds about a quart of oil. Unscrew the old filter by hand (use a filter wrench if it's too tight), wipe the mounting surface clean with a rag, and check that the rubber gasket from the old filter came off with it. If it stuck to the engine, remove it or the new filter won't seal.
explore a thin layer of new oil to the rubber gasket on the new Wix filter before installing it. This helps the gasket seat properly and makes removal easier next time. Screw it on hand-tight until the gasket touches, then turn it three-quarter turn more. Start the engine and let it run for 30 seconds, then check underneath for leaks. If you see oil dripping, the filter may not be tight enough — turn it another quarter turn and recheck.
Where to buy and what to expect for price
Wix filters are stocked at every major auto parts chain in the United States: AutoZone, O'Reilly Auto Parts, NAPA, Advance Auto Parts, and Walmart. Amazon and eBay also carry them, though shipping time may be longer if you need the filter today. Prices vary slightly by retailer and by filter model, but expect to pay $10 to $20 for a standard passenger car filter. Truck and SUV filters may cost a few dollars more because they have larger media areas.
Some retailers offer loyalty programs or coupons that reduce the price further. AutoZone and O'Reilly both run regular promotions on filters. If you're buying oil and a filter together, ask if there's a bundle discount. Buying online is usually cheaper than in-store, but you'll pay for shipping unless you may have access to for free delivery. For a $12 filter, shipping costs can erase the savings, so compare the total price before checking out.
Frequently Asked Questions
Is a Wix filter as good as the OEM filter from the dealership?
Wix filters meet industry filtration standards and have been used as OEM filters by some manufacturers. For routine oil changes, the performance difference is minimal. OEM filters may have slight engineering advantages for your specific engine, but Wix is a reliable choice that costs less and is easier to find.
Can I use a Wix filter on any vehicle?
No. Each vehicle engine requires a specific filter size and thread pattern. You must match the part number to your vehicle's year, make, model, and engine size. Using the wrong filter can cause leaks or poor filtration. Always verify the part number with a parts store before buying.
How tight should I screw on the filter?
Hand-tighten the filter until the rubber gasket touches the engine block, then turn it three-quarter turn more. Do not use a wrench — over-tightening crushes the gasket and causes leaks. Under-tightening allows oil to seep around the gasket.
What happens if I don't change the filter when I change the oil?
The filter becomes clogged with dirt and metal particles over time. A clogged filter forces oil through the bypass valve, which means unfiltered oil circulates through your engine. This accelerates wear on bearings and other moving parts. Always change the filter at the same interval as the oil.
Can I reuse a Wix filter or clean it instead of replacing it?
No. Oil filters are designed for single use. Cleaning a filter does not remove all trapped particles and can damage the media. Filters are inexpensive compared to engine repair, so replacement is the only safe option.