The crankcase ventilation filter on your 6.7 Cummins removes moisture and contaminants from engine vapors before they recirculate into the intake

The crankcase ventilation filter (also called a catch can filter or breather filter) sits between your engine's crankcase and the intake manifold. As your engine runs, pressure and vapors build inside the crankcase. The ventilation system routes those vapors back into the engine to burn them, but the filter traps oil mist, water droplets, and soot before they reach the intake. On the 6.7 Cummins diesel, this filter prevents carbon buildup in the intake valves and keeps your fuel economy and power output stable.

Unlike your engine air filter or fuel filter, the crankcase ventilation filter is not a wear item that needs replacement on a fixed schedule. Instead, you inspect it during routine maintenance and replace it when it becomes saturated with oil or shows visible restriction. On a 6.7 Cummins, that typically happens somewhere between 50,000 and 100,000 miles, depending on driving conditions and engine load.

Key Takeaways

  • The crankcase ventilation filter traps oil mist and moisture from engine vapors before they enter the intake system.
  • Replacement intervals vary based on your driving style and load; there is no fixed service schedule like there is for air filters.
  • A clogged crankcase filter can cause rough idle, reduced fuel economy, and increased crankcase pressure that may damage seals.
  • You can inspect the filter yourself during routine maintenance, but replacement requires removing the filter housing and may involve disconnecting hoses.
  • OEM Cummins filters and quality aftermarket options are both available; the choice depends on your budget and maintenance preferences.

Where the crankcase ventilation filter sits on the 6.7 Cummins

On the 6.7 Cummins, the crankcase ventilation filter is mounted on top of or to the side of the engine, typically near the valve cover. The exact location depends on whether you have a 2007–2009 model (earlier design) or a 2010 and later truck (updated system). The filter connects to the crankcase with a hose on one side and to the intake manifold or air intake system on the other.

The housing is usually a plastic or aluminum canister about the size of a soda can. Inside is a replaceable filter element made of foam or synthetic media. When you open the hood and look at the top of the engine, you should be able to spot it without removing other components. If you are unsure, your owner's manual or a service diagram will show the exact location for your model year.

Signs your 6.7 Cummins crankcase filter needs replacement

A saturated crankcase ventilation filter does not always announce itself with a warning light. Instead, watch for these symptoms: rough idle or hesitation when accelerating, a noticeable drop in fuel economy, a slight hissing sound from the engine bay, or oil residue around the filter housing or intake hoses. Some owners also notice a faint burning smell if oil vapor is not being filtered properly.

The most reliable way to know is to inspect the filter itself. Remove the filter housing (usually held by one or two bolts) and look at the element inside. If it is dark brown or black, soaked with oil, or visibly restricted, it is time to replace it. A clean filter should be light tan or white and feel relatively dry to the touch. If you are unsure whether the filter is dirty enough to replace, err on the side of caution—a new filter costs between $30 and $80 and takes 15 to 30 minutes to swap out.

How to replace the crankcase ventilation filter on your 6.7 Cummins

Start by letting the engine cool for at least 30 minutes. Locate the filter housing and note which hoses connect to it—take a photo with your phone if it helps you remember the routing. Unbolt the housing (usually one or two bolts) and carefully pull it away from the engine. Some hoses may need to be disconnected; if so, mark them with tape so you know which goes where when you reassemble.

Once the housing is free, open it and remove the old filter element. Wipe the inside of the housing clean with a lint-free cloth or paper towel to remove any accumulated oil sludge. Install the new filter element, making sure it sits flat and fully seals inside the housing. Reconnect any hoses you removed, bolt the housing back down, and start the engine to check for leaks or hose routing issues. The whole job is straightforward enough for a home mechanic with basic tools.

If you are not comfortable working on your engine, a diesel shop or Cummins dealer can handle this in under an hour. Labor costs vary by location and shop, but expect to pay $50 to $150 on top of the filter cost.

OEM versus aftermarket crankcase filters for the 6.7 Cummins

Cummins manufactures an OEM crankcase ventilation filter designed specifically for the 6.7 engine. This filter is engineered to the exact specifications of your truck's ventilation system and carries Cummins' warranty backing. OEM filters typically cost $50 to $80 and are available through Cummins dealers or online parts suppliers.

Quality aftermarket filters from brands like Donaldson, Baldwin, or Fleetguard are also widely available and often cost $30 to $50. These filters meet or exceed OEM performance standards and work reliably in most applications. The trade-off is that you lose the Cummins warranty stamp, though most aftermarket filters carry their own manufacturer warranty. For routine maintenance, an aftermarket filter is a sensible choice. If you prefer the assurance of OEM parts or are troubleshooting a specific issue, the Cummins filter is worth the extra cost.

What happens if you ignore a clogged crankcase filter

Running with a severely clogged crankcase ventilation filter puts extra pressure inside the engine. That pressure can force oil past seals and gaskets, leading to oil leaks around the valve covers, pan gasket, or crankshaft seals. Over time, those leaks become expensive to repair and can damage other engine components if oil level drops too low.

A restricted filter also forces unfiltered vapors into the intake system, which deposits carbon and oil residue on intake valves and in the combustion chamber. This buildup reduces fuel economy, increases emissions, and can cause rough running or hesitation. In severe cases, carbon accumulation may require intake valve cleaning or decarbonization service, which costs several hundred dollars. Replacing a $50 filter every 50,000 to 100,000 miles is far cheaper than dealing with the consequences of neglect.

Maintenance tips to extend crankcase filter life

The lifespan of your crankcase ventilation filter depends largely on how hard you run the engine and the condition of your air intake system. Trucks used for towing, hauling, or frequent idling tend to saturate the filter faster because the engine produces more crankcase vapor under load. Keeping your engine air filter clean also helps—a clogged air filter increases intake vacuum, which can draw more oil mist into the crankcase ventilation system.

Check the crankcase filter every 25,000 miles if you tow regularly, or every 50,000 miles for normal driving. This inspection takes five minutes and gives you a clear picture of how fast the filter is loading. If you see it getting dirty quickly, you may want to replace it more often or investigate whether your engine has an oil leak or air filter issue that is contributing to the problem. Staying ahead of filter saturation keeps your engine running cleanly and prevents the pressure-related leaks that can develop when the system is restricted.

Frequently Asked Questions

Can I clean and reuse my 6.7 Cummins crankcase filter instead of replacing it?

Most crankcase ventilation filters are not designed to be cleaned and reused. The filter media is fragile and can tear or lose its sealing properties if you try to wash it. Replacement filters are inexpensive enough that reusing a dirty filter is not worth the risk of oil leaks or intake contamination. If you want to reduce waste, consider donating your old filter to a recycling program that handles automotive parts.

Is the crankcase ventilation filter the same as the PCV valve?

No. The PCV valve (positive crankcase ventilation valve) is a separate component that regulates the flow of vapors from the crankcase back into the intake. The crankcase ventilation filter is what cleans those vapors before they flow through the PCV valve. Your 6.7 Cummins has both, and they work together as part of the same system.

What if my crankcase filter housing is leaking oil?

Oil leaks from the housing usually mean the seal between the housing and the filter element has failed, or the housing itself has cracked. Try replacing the filter first—sometimes a new element with a fresh seal stops the leak. If the leak continues, the housing gasket or O-ring may need replacement, or the housing itself may be damaged and require replacement. A diesel shop can diagnose this quickly.

How much does a 6.7 Cummins crankcase filter cost?

OEM Cummins filters run $50 to $80, while quality aftermarket options cost $30 to $50. Labor at a shop adds $50 to $150 depending on location. If you do the work yourself, you only pay for the filter itself.

Will replacing my crankcase filter improve fuel economy?

If your filter is clogged, replacing it may restore some lost fuel economy by reducing intake restriction and carbon buildup. The improvement is usually modest—a few miles per gallon at most—but it is a side benefit of keeping the system clean. The main reason to replace the filter is to prevent engine damage and maintain reliable operation.