Turbo replacement typically costs between $1,200 and $4,000 for parts and labour combined, though the exact price depends on your vehicle make, whether the turbo failed completely or just lost boost, and whether you choose an OEM part or an aftermarket alternative.
A turbo is a turbine-driven compressor bolted to your exhaust manifold. It forces more air into the engine than it could draw naturally, which means more fuel burns per cycle and you get more power. When it fails, you lose that boost pressure, and the engine runs at its base output—or sometimes worse, because a damaged turbo can leak oil into the combustion chamber and cause misfires.
The cost you'll actually pay breaks into three parts: the turbo unit itself, the labour to remove and install it, and any ancillary parts that need replacing at the same time. Labour is often the largest single expense because the turbo sits deep in the engine bay, usually requiring removal of other components to reach it.
Key Takeaways
- OEM turbos cost more than aftermarket ones but carry the manufacturer's warranty and are may provide to fit your specific engine.
- Labour typically runs 4 to 8 hours at your shop's hourly rate, which varies by region and whether the shop is a dealership or independent.
- Gaskets, seals, oil lines, and the intercooler hose often need replacement during a turbo job because they wear out alongside the turbo itself.
- A turbo that has failed catastrophically may have damaged the intercooler or engine internals, which adds hundreds or thousands to the final bill.
- Some turbos can be rebuilt rather than replaced, which costs less but takes longer and carries more risk than a new or remanufactured unit.
OEM versus aftermarket turbos and what each costs
An OEM turbo is the exact unit your vehicle's manufacturer installed at the factory. It carries the manufacturer's warranty (usually 3 years or 36,000 miles), fits perfectly on the first try, and is may provide to meet the engine's original specifications. OEM turbos typically cost $800 to $2,500 depending on the vehicle. A BMW turbo, for example, costs significantly more than a Ford turbo because the engineering is more complex and the production volume is lower.
Aftermarket turbos are made by third-party manufacturers like Garrett, Holset, or IHI. They cost $400 to $1,200 and often carry a 1-year warranty. Quality varies: some aftermarket turbos are excellent and will last as long as OEM units, while others are built to a lower standard and may fail sooner. The risk is that an aftermarket turbo might not fit perfectly, requiring modification to mounting brackets or oil lines, which adds labour time and cost.
Remanufactured turbos are cores that have been disassembled, cleaned, worn parts replaced, and reassembled to factory specifications. They cost $500 to $1,500 and typically carry a 1-year warranty. They are a middle ground: cheaper than OEM but more reliable than the cheapest aftermarket options. Many shops recommend remanufactured turbos for vehicles out of warranty because the price-to-reliability ratio is better.
Labour costs and how long the job takes
Turbo replacement labour typically runs 4 to 8 hours depending on the vehicle. A front-wheel-drive car with the turbo mounted low on the engine might take 4 hours. A rear-wheel-drive truck with the turbo deep in the engine bay, or a vehicle where the intake manifold must come off first, can take 8 hours or more. Some vehicles require removal of the radiator, air conditioning lines, or engine cover just to access the turbo bolts.
Labour rates vary by region and shop type. Independent shops typically charge $80 to $150 per hour. Dealerships charge $120 to $200 per hour. In high-cost areas like California or the Northeast, dealership rates can exceed $200 per hour. A 6-hour job at an independent shop might cost $480 to $900 in labour alone; the same job at a dealership could cost $720 to $1,200.
The shop should give you a labour estimate before starting work. If the estimate says "4 to 6 hours" rather than a fixed number, ask why—sometimes the technician won't know exactly how long until they start disassembling, especially if the turbo is seized or the bolts are corroded.
Gaskets, seals, and other parts that usually need replacement
When a turbo is removed, the gaskets and seals around it are disturbed and often damaged during removal. Replacing them while the turbo is out costs far less than removing the turbo again later if a seal leaks. Most shops replace the turbo inlet and outlet gaskets, the oil supply line seals, and the exhaust manifold gasket as part of the job. These parts together cost $100 to $300 and add 30 minutes to 1 hour of labour.
The intercooler hose connects the turbo outlet to the intercooler. If the turbo has been running hot or has been leaking oil, the hose may be degraded inside. Replacing it costs $50 to $200 in parts and is often done at the same time as the turbo. The air filter should also be replaced because turbo failure often means metal particles have circulated through the intake system.
If the turbo failed because of an oil starvation problem—a clogged oil supply line or a failed oil pressure sensor—that underlying cause must be fixed, or the new turbo will fail the same way. Diagnosing and fixing the root cause can add $200 to $800 to the bill.
When turbo failure damages other engine parts
A turbo that has failed catastrophically—seized bearing, shattered compressor wheel, or severe oil leak—can damage components downstream. If compressor wheel fragments enter the intercooler, the intercooler must be cleaned or replaced ($300 to $800). If oil has been leaking into the combustion chamber for weeks, carbon buildup may require intake valve cleaning ($200 to $500) or, in severe cases, cylinder head removal and cleaning ($1,000 to $2,500).
Before authorizing a turbo replacement, ask the shop whether they recommend a compression test or borescope inspection of the cylinders. A compression test costs $100 to $200 and tells you whether the engine's internal seals are still sound. If compression is low, internal damage has occurred and the repair bill will be much higher than a straightforward turbo swap.
Rebuilt turbos: lower cost, longer timeline, higher risk
Some independent shops and specialty turbo shops offer turbo rebuilding. A technician disassembles your turbo, replaces worn bearings and seals, cleans the housing, and reassembles it. Cost is typically $400 to $800, which is less than a new or remanufactured turbo. The catch is that rebuilding takes 2 to 4 weeks because the work is done by hand, and the warranty is usually 6 months to 1 year rather than the 3 years you get with OEM.
Rebuilding makes sense if your turbo failed due to a single wear item—a bearing that wore out after 150,000 miles—and the rest of the turbo is sound. It makes less sense if the turbo was damaged by metal particles, oil starvation, or overheating, because those conditions may have weakened other internal components that won't show up until the turbo is running under load again.
Regional variation and dealership versus independent shop pricing
A complete turbo replacement at a dealership in a major metropolitan area can easily reach $4,000 to $5,000 when you add OEM parts, high labour rates, and diagnostic fees. The same job at an independent shop in a smaller city might cost $1,800 to $2,500. Neither price is wrong—dealerships have higher overhead and often include more comprehensive diagnostics, while independent shops have lower overhead but may have less specialized equipment.
If you choose an independent shop, verify that they have experience with your specific vehicle. Turbo installation is not routine work at every shop, and mistakes during installation—incorrect oil line routing, cross-threading a bolt, or improper gasket seating—can cause the new turbo to fail within weeks. Ask whether the shop has done this job before and whether they offer a warranty on the labour.
Frequently Asked Questions
Can I drive with a failing turbo, or do I need to replace it right away?
You can drive a car with a failing turbo, but you should not delay. A turbo that is leaking oil will contaminate the engine oil and damage the catalytic converter. A turbo with a seized bearing will eventually lock up completely, which can stall the engine at highway speed. Have it diagnosed and replaced within a week or two of noticing symptoms like loss of boost, blue smoke from the exhaust, or a loud whistling sound.
Will a new turbo void my vehicle's warranty?
No, not if the turbo itself failed. If your vehicle is still under manufacturer warranty and the turbo fails, the manufacturer should cover the replacement. If you are out of warranty and choose to replace the turbo yourself, the replacement does not void the rest of the warranty. However, if the turbo failed because of neglected maintenance—a clogged air filter or low oil level—the manufacturer may deny coverage.
Is it worth rebuilding a turbo instead of replacing it?
Rebuilding is worth considering if the turbo has moderate wear and the failure was not caused by oil starvation or overheating. If the turbo was damaged by debris or failed suddenly, rebuilding is riskier because hidden damage may not show up until the turbo is under load. Ask the shop whether they recommend rebuilding or replacement based on what they find when they open it up.
What causes a turbo to fail prematurely?
The most common causes are oil starvation (clogged oil supply line or low oil level), overheating (intercooler leak, cooling system failure, or running too lean), and foreign object damage (debris from a failed engine component). Regular oil changes, maintaining proper coolant levels, and replacing air filters on schedule prevent most premature turbo failures.
Should I replace the intercooler at the same time as the turbo?
Only if it is damaged or leaking. If the turbo failed cleanly and the intercooler is functioning normally, there is no reason to replace it. However, if the turbo has been leaking oil or running hot, have the shop inspect the intercooler for internal damage or blockage before closing up the job.