What a Smart Start interlock does and why it's installed

A Smart Start ignition interlock is a device that prevents your car's engine from starting if it detects alcohol on your breath. The device connects to your vehicle's ignition system and requires you to blow into a mouthpiece before the engine will turn over. If the breath sample registers above a set alcohol threshold—usually 0.02% blood alcohol content or lower, depending on your state's program—the car will not start.

These devices are court-ordered, not optional. They are installed as a condition of a DUI or DWI conviction in most U.S. states, or sometimes as an alternative to license suspension. The goal is to prevent you from driving while impaired while you maintain the ability to drive for work, school, and essential errands. Smart Start is one of the largest interlock manufacturers in the country, but other brands like Draeger, Guardian, and Alcohol Detection Systems also make devices that work the same way.

The device itself is about the size of a car radio and sits under your dashboard or steering column. It has a mouthpiece you blow into, a digital display, and wiring that connects to your ignition. Installation takes about an hour, and you'll need to visit a certified installer—Smart Start operates service centers in most states, or your court order will direct you to an approved location.

Key Takeaways

  • Smart Start interlocks require a breath sample before the engine will start, and the device logs every test result for the monitoring authority.
  • Installation costs vary by state but typically range from $70 to $150, with monthly monitoring fees of $50 to $100 depending on your program requirements.
  • You must pass rolling retests while driving—the device will prompt you to provide another breath sample at random intervals, and failure to do so will disable the vehicle.
  • The device records all attempts, passes, and failures; your probation officer or the court reviews these records to verify compliance.
  • Removal requires a court order and proof of program completion, which usually means 12 months of clean tests, though timelines vary by state and offense.

Installation, costs, and what happens at your first appointment

When you receive a court order for interlock installation, you will be given a list of approved service providers in your area. Smart Start has the largest network, with service centers in all 50 states. You contact the center, schedule an appointment, and bring your vehicle and proof of insurance. The technician will explain how the device works, install it under your dashboard, and calibrate it to your state's alcohol threshold.

Installation fees are set by state law or court order and do not vary between providers. Most states charge between $70 and $150 for the initial installation. Monthly monitoring fees—the cost to maintain the device and have your test results reviewed—typically range from $50 to $100 per month, though some states subsidize this cost for low-income drivers. You pay these fees directly to the service provider, not to the court. If you cannot afford the fee, ask the technician about hardship waivers; many states allow them, but you will need to document your income.

At your first appointment, the technician will also explain the rolling retest requirement. While you are driving, the device will prompt you to provide another breath sample at random intervals—usually between 5 and 15 minutes after the initial start. You have a set time (usually 3 to 5 minutes) to pull over safely and blow into the device. If you do not provide the sample, or if the sample is above the threshold, the device will log a violation and may disable your vehicle's horn and lights as a warning. A violation does not when ready lock you out, but repeated violations can result in vehicle lockout, extended program participation, or additional court penalties.

How the testing process works every time you drive

Every time you start your car, you must provide a breath sample. Blow steadily into the mouthpiece for about 5 to 6 seconds. The device analyzes the sample in real time and displays a result: green light means you passed and the engine will start, red light means the alcohol level is above the threshold and the engine will not start. If you fail, you can try again after a waiting period, usually 15 to 30 minutes. Repeated failed attempts in a short time may trigger a lockout that requires a service center visit to reset.

The device is sensitive to mouth alcohol—residue from mouthwash, cough syrup, or food—so rinse your mouth with water before blowing if you have used any of these products. Some drivers keep a water bottle in the car for this reason. The threshold is very low, usually 0.02% or lower, so even a small amount of alcohol will register as a fail.

While you are driving, the device will signal you to provide a rolling retest. The prompt appears on the display, and you have a few minutes to find a safe place to pull over. Provide the sample the same way you did at startup. If you pass, the device records it and you continue driving. If you fail, the device logs a violation. Your probation officer or the monitoring authority reviews all of these records—passes, fails, and missed tests—at regular intervals, usually monthly or quarterly.

What violations mean and how they affect your program

A violation is any failed breath test, missed rolling retest, or attempt to tamper with or bypass the device. One or two violations may not result in when ready consequences, but patterns of violations can lead to extended program participation, increased monitoring fees, vehicle impoundment, or additional criminal penalties. Your probation officer has discretion to recommend sanctions based on the violation record.

Tampering—attempting to use someone else's breath, blocking the mouthpiece, or disconnecting the device—is a separate criminal offense in most states and will result in when ready arrest and prosecution. The device is designed to detect these attempts and will log them with a timestamp. Do not attempt to bypass or disable the device under any circumstances.

If you have a legitimate reason you cannot blow into the device—a medical condition, a broken arm, severe illness—contact your probation officer or the service provider when ready. Some states allow temporary exemptions or alternative testing methods, but you must request them in advance. Failing to show up for a rolling retest without prior approval counts as a violation.

Program length and what you need to do to get the device removed

The length of your interlock program is set by your court order and depends on your state's laws and the severity of your offense. Most first-time DUI convictions require 12 months of participation. A second offense may require 24 months or longer. Some states allow early removal after 6 months if you have a clean test record, but this requires a separate petition to the court and is not automatic.

To be removed from the program, you must meet all of the following: complete the required time period, maintain a clean test record (usually defined as zero or very few violations over the final months), pay all outstanding fees, and obtain a court order authorizing removal. You cannot straightforward uninstall the device yourself. The service provider will schedule a removal appointment, uninstall the device, and provide documentation to the court that you have completed the program.

During your program, keep all appointment letters, fee receipts, and test records. These documents prove compliance if you need to petition for early removal or if there is a dispute about your record. If you move to a different state, contact your original probation officer and the new state's interlock program administrator to arrange a transfer. You cannot straightforward switch providers without court approval.

Maintenance, device failures, and what to do if something breaks

Smart Start devices require regular maintenance to stay accurate. You will be required to visit a service center every 30 days for a calibration check. During this visit, the technician will test the device's accuracy against a known standard, clean the mouthpiece, and read your test records. This appointment is mandatory; missing it counts as a violation. The calibration visit is usually included in your monthly monitoring fee, but confirm this when you sign up.

If the device malfunctions—the display goes blank, the mouthpiece cracks, or it will not power on—contact your service provider when ready. Do not attempt to repair it yourself. The technician will either repair it on-site or provide you with a loaner device so you can continue to drive while yours is being fixed. Any downtime should be documented and reported to your probation officer, as you are still required to comply with your program even if the device is broken.

If your vehicle breaks down or is in the shop for repairs, inform your service provider. Some programs allow temporary exemptions or will transfer the device to a loaner vehicle. Do not drive a different car without the device installed, as this violates your program conditions and can result in arrest.

Costs beyond installation and what financial help may be available

The total cost of an interlock program includes installation, monthly monitoring, calibration visits, and removal. Over a 12-month program, you can expect to pay $600 to $1,500 total, depending on your state and whether you incur violations that extend your participation. Some states charge additional fees for violations or early removal petitions.

If you cannot afford these costs, ask about hardship waivers when you visit the service center. Many states allow reduced fees or payment plans for drivers with documented low income. Some counties or nonprofits also offer grants to help cover interlock costs. Your probation officer or the service provider can direct you to these resources. Do not ignore the fees or skip appointments; this will result in violations and extended program participation, which costs more in the long run.

Frequently Asked Questions

Can I remove the device myself or have someone else remove it?

No. Removing the device yourself is tampering and is a criminal offense. Only a certified technician at an approved service center can remove it, and only with a court order. If you remove it or attempt to disable it, you will be arrested and prosecuted.

What if I fail a test because I used mouthwash or cough syrup?

Mouth alcohol from these products can trigger a fail. Rinse your mouth with water before blowing into the device. If you fail due to mouth alcohol, explain this to your probation officer at your next review. A single fail is usually not a major issue, but repeated fails will be flagged as a pattern of violations.

Do I have to pay for the device if I move out of state?

If you move, you must transfer your interlock program to the new state's system. Contact your original probation officer and the new state's interlock administrator to arrange this. You will continue to pay monitoring fees, and the device will be transferred or reinstalled in your new location. Do not straightforward stop paying or abandon the program.

What happens if I miss a calibration appointment?

Missing a calibration visit is a violation of your program conditions. It will be logged in your record and reported to your probation officer. Repeated missed appointments can result in extended program participation, increased fees, or additional criminal penalties. If you cannot make an appointment, contact the service center in advance to reschedule.

Can I get the device removed early if I have a clean record?

Some states allow early removal after 6 months if you have zero or very few violations. This requires filing a petition with the court and is not automatic. Your probation officer can advise you on whether early removal is possible in your state and what your record needs to show. Even if you are allowed to petition, the court must approve it before the device can be removed.