What the BlueDriver app can and cannot tell you about your alternator
BlueDriver is a Bluetooth diagnostic scanner that plugs into your car's OBD-II port (the diagnostic socket under your dashboard) and reads fault codes your engine computer has stored. It can show you whether your car has recorded an alternator-related code—such as P0562 (system voltage low) or P0563 (system voltage high)—but it cannot measure your alternator's actual output or tell you whether it is failing.
The app is useful for confirming that your car's computer has flagged a charging system problem, which gives you real information to take to a mechanic. What it cannot do is replace a multimeter test or a load test, which are the actual ways a technician diagnoses alternator failure. Think of BlueDriver as a translator: it tells you what your car is complaining about, not whether the complaint is accurate.
If you own a car built after 1996, you have an OBD-II port, and BlueDriver will work with it. The app costs money upfront (typically $100–$150 for the hardware scanner itself), so it makes sense only if you plan to use it for multiple repairs or want to understand what codes mean before you visit a shop.
Key Takeaways
- BlueDriver reads fault codes from your engine computer but cannot measure whether your alternator is actually producing power.
- Alternator codes like P0562 or P0563 tell you the computer detected a charging problem, but the real cause could be the alternator, battery, wiring, or battery terminals.
- You will need the BlueDriver hardware scanner (a small Bluetooth device) and the free mobile app, both available from BlueDriver's website.
- A mechanic will still need to perform a multimeter or load test to confirm the alternator is the problem and not something else in the charging circuit.
Getting the hardware and app set up
Purchase the BlueDriver scanner from the manufacturer's website or authorized retailers. The device itself is a small Bluetooth adapter about the size of a car key fob. read the BlueDriver app to your smartphone (available for both iOS and Android). You do not need to pay for the app itself—the cost is in the hardware scanner.
Locate your car's OBD-II port. It is usually under the steering column on the left side of the dashboard, or sometimes on the right. It looks like a rectangular socket with 16 pins. Turn off your engine, plug the BlueDriver scanner into the port, and turn the key to the "on" position (do not start the engine). Open the BlueDriver app and follow the pairing instructions to connect via Bluetooth. The app will walk you through this the first time.
Once paired, you can leave the scanner plugged in while you use the app. The connection is stable and does not drain your battery significantly during the diagnostic session.
Reading alternator-related fault codes
Start the app and select "Read Codes" or "Scan Vehicle." BlueDriver will query your engine computer and display any stored codes. Look for codes in the P0500–P0700 range that relate to the charging system. The most common alternator codes are:
- P0562: System Voltage Low—the computer detected that battery voltage dropped below normal while the engine was running.
- P0563: System Voltage High—the computer detected that battery voltage rose above normal, suggesting the alternator is overcharging.
- P0641: Sensor Reference Voltage A High or Low—less common but can indicate alternator output problems.
BlueDriver will display a plain-language description of each code. Read it carefully. A P0562 code means your car's computer saw low voltage, but that does not automatically mean your alternator is dead. Low voltage can also result from a weak battery, corroded battery terminals, loose ground wires, or a broken serpentine belt that is not turning the alternator pulley. This is why a mechanic must test further.
Write down the exact code number and the description. This information is what you will show a technician to help them narrow down where to start testing.
What happens after you find a code
If BlueDriver shows an alternator code, your next step is to have a mechanic perform a multimeter test or load test. These are the actual diagnostic procedures that measure whether your alternator is producing the correct voltage (usually 13.5 to 14.5 volts at idle with the engine running) and whether it can supply enough current under load.
A multimeter test takes about five minutes: the mechanic connects a digital multimeter to your battery terminals while the engine idles and while it runs at 2,000 RPM. A load test is more thorough—it uses a special machine that draws power from the battery while the alternator is running, simulating real driving conditions. Both tests cost between $50 and $150 at most shops and are worth doing before you replace the alternator.
Bring the BlueDriver code printout with you. It saves the mechanic time and shows you have already done some homework. If the code is P0562 and the multimeter shows the alternator is producing correct voltage, the problem is likely your battery or a connection issue, not the alternator itself.
When BlueDriver is useful and when it is not
BlueDriver is most useful when your check engine light is on and you want to know what your car is reporting before you pay for a diagnosis. It is also helpful if you are tracking a recurring code—for example, if you had an alternator replaced and the same code comes back, you can confirm it with BlueDriver before returning to the shop.
BlueDriver is not useful if your car has no check engine light but you suspect alternator trouble based on symptoms like dim headlights, a dead battery, or a whining noise from the engine. In those cases, you need a mechanic with a multimeter or load tester, not a code reader. The absence of a code does not mean your alternator is healthy—it means your car's computer has not yet flagged a problem.
Similarly, if your battery is completely dead and your car will not start, BlueDriver cannot help you because the scanner needs power to communicate. You will need a jump start or a tow first.
Clearing codes and what it means
BlueDriver allows you to clear codes from your engine computer. Do not do this unless a mechanic has confirmed the repair is complete. Clearing a code before the problem is fixed will turn off your check engine light, but the fault will return within a few days of driving. This wastes time and makes it harder for a technician to diagnose the real issue.
If a mechanic replaces your alternator and clears the code, the light should stay off. If it comes back within a week, that is a sign the replacement alternator is faulty or the underlying problem was not actually the alternator. In that case, bring the car back and show the mechanic the code has returned.
Alternatives to BlueDriver for checking your alternator
If you do not own a BlueDriver scanner, you have other options. Many auto parts stores (such as AutoZone or O'Reilly) will read your codes for free using their own scanners. You drive in, they plug in their device, and they print out the codes. This gives you the same information as BlueDriver at no cost, though you cannot keep the scanner or use it at home.
A mechanic's multimeter test or load test is the only way to actually diagnose alternator failure. If you want to avoid paying for a diagnosis, the free code read at an auto parts store is a reasonable first step. If the code points to the alternator and you want confirmation before paying for repair, a $50–$150 multimeter test is the next logical step.
Frequently Asked Questions
Can I use BlueDriver to test my alternator without going to a mechanic?
No. BlueDriver reads codes but does not measure alternator output. A mechanic must use a multimeter or load tester to confirm the alternator is actually failing. BlueDriver tells you what your car's computer thinks is wrong; it does not tell you whether the computer is right.
What if BlueDriver shows no codes but my headlights are dim?
Dim headlights can mean your alternator is failing but has not yet triggered a code, or it can mean your battery is weak, your connections are corroded, or your headlight bulbs are old. No code does not mean no problem. Take your car to a mechanic for a multimeter test of the charging system.
Do I need BlueDriver if my auto parts store reads codes for free?
Only if you plan to diagnose multiple problems over time or want to check codes at home without a trip to the store. For a one-time alternator issue, the free code read at an auto parts store is usually enough to get you started.
Can I clear the alternator code myself with BlueDriver?
You can, but do not. Clearing the code before the alternator is repaired will turn off your check engine light temporarily, but the code will return within days. Let a mechanic clear it after they have completed the repair.
What if the code comes back after I replace the alternator?
Use BlueDriver to confirm the code has returned, then bring your car back to the shop. A recurring code after replacement usually means the new alternator is faulty, the wiring is damaged, or the battery is too weak to accept a charge. The mechanic should test the new alternator under load and check your battery and connections.