Find Your Carburetor's Model Number on the Casting
The fastest way to identify a Holley carburetor is to locate the model number stamped directly into the metal casting. On most Holley carburetors, this number appears on the passenger side of the main body, near the base where the carburetor bolts to the intake manifold. The stamping is usually a four or five-digit number, sometimes followed by a dash and additional digits for revision codes.
The location can vary slightly depending on the carburetor's age and design. On older two-barrel models, the number may be on the front of the casting. On four-barrel models, check the driver's side as well if you cannot find it on the passenger side. Use a wire brush or fine steel wool to clean away any carbon buildup or corrosion—the number is often hard to read without removing decades of grime.
Once you have the model number, you can cross-reference it with Holley's documentation or carburetor identification charts available through automotive forums and technical resources. This number tells you the carburetor's basic type, the year it was manufactured, and what vehicle it was originally designed for.
Key Takeaways
- The model number is stamped into the casting on the passenger side of the main body, usually near the mounting flange.
- A four or five-digit number followed by optional revision codes identifies the specific carburetor configuration and production year.
- Cleaning away carbon and corrosion with a wire brush makes the stamping readable if it is faint or obscured.
- Cross-referencing the model number with Holley documentation tells you the carburetor's original process and specifications.
- The date code on the casting—separate from the model number—shows the month and year of manufacture.
Decode the Date Code Stamped on the Casting
Holley carburetors carry a separate date code that shows when the carburetor was actually manufactured. This code appears as a letter and number combination, typically stamped near the model number or on the bowl itself. The letter represents the month (A for January, B for February, and so on through L for December), and the number represents the year within the decade.
For example, a date code of "C7" means the carburetor was made in March of 1967 or 1977 or 1987, depending on the decade. You will need to cross-reference this with the model number and any documentation about the vehicle to narrow down the exact year. Holley's production records and online carburetor databases can help you match the date code to the correct decade.
The date code is useful for verifying authenticity and determining whether a carburetor is original to a vehicle. If you are restoring a classic car, matching the date code to the vehicle's build date confirms that the carburetor is period-correct.
Match the Carburetor Type to Your Engine Configuration
Holley made carburetors in several distinct types, and the model number tells you which one you have. Two-barrel carburetors have two fuel circuits and are typically found on smaller or economy engines. Four-barrel carburetors have four fuel circuits and are standard on mid-range and performance engines. The model number's first digit or first two digits usually indicate the barrel count and basic design family.
Holley also produced Dominator carburetors (large four-barrel units for racing and high-performance builds), Spreadbore carburetors (with unequal-sized barrels for specific engine types), and Tunnel Ram carburetors (designed to mount on tunnel ram intake manifolds). Each type has a distinct model number range, so knowing your carburetor's type helps you understand what engine it was built for and what performance characteristics it has.
The model number also encodes the fuel inlet location (single or dual inlet), the choke type (electric, manual, or divorced choke), and whether the carburetor is designed for street or race use. These details matter if you are rebuilding the carburetor or swapping it to a different vehicle.
Use Online Carburetor Identification Charts and Databases
Several online resources maintain searchable databases of Holley carburetor model numbers. The most reliable sources are Holley's official technical documentation, carburetor rebuilding supply websites, and classic car forums where enthusiasts have compiled identification guides. Enter your model number into these databases and you will get the carburetor's original process, bore size, fuel delivery specifications, and rebuild kit part numbers.
Carburetor rebuilding suppliers like Edelbrock (which owns Holley) and independent shops often publish identification charts that cross-reference model numbers to vehicle makes, model years, and engine sizes. These charts are usually free to view online and can be printed for reference while you work on your engine.
If you cannot find your exact model number online, post a clear photo of the casting with the number visible to a classic car or engine forum. Experienced restorers can often identify a carburetor from a photo even if the number is partially worn away, and they can point you toward the correct rebuild kit and gasket set.
Distinguish Original Equipment from Aftermarket Replacements
An original equipment (OE) carburetor was installed by the vehicle manufacturer and matches the engine's original specifications. The model number on an OE Holley carburetor will correspond to the vehicle's build year and engine size. If you are restoring a vehicle to original condition, an OE carburetor with a matching date code is highly desirable.
Aftermarket Holley carburetors are performance or replacement units sold separately and may not match the original specifications. These carburetors often have model numbers that indicate they are universal or designed for a range of engine sizes. An aftermarket carburetor may have been installed by a previous owner for better performance or fuel economy, and its model number will not match the vehicle's original documentation.
To determine whether your carburetor is original, compare its model number to the carburetor specification listed in the vehicle's factory service manual or build sheet. If the numbers match and the date code falls within the vehicle's production year, the carburetor is likely original. If the model number is different or significantly newer than the vehicle, it is an aftermarket replacement.
Check the Carburetor's Fuel Inlet and Mounting Configuration
The physical layout of the carburetor's fuel inlet and mounting flange provides additional clues to its identity. Some Holley carburetors have a single fuel inlet on the driver's side, while others have dual inlets or an inlet on the passenger side. The model number encodes this information, but you can also verify it by looking at the carburetor itself.
The mounting flange—the part that bolts to the intake manifold—comes in different bolt patterns and heights. A four-barrel carburetor designed for a square-bore intake manifold will not bolt directly to a spread-bore manifold without an adapter. The model number tells you which mounting configuration the carburetor uses, and this information is critical if you are swapping a carburetor to a different engine or vehicle.
If you are unsure whether a carburetor will fit your engine, measure the bolt pattern and compare it to your intake manifold. Holley's technical documentation includes mounting specifications for each model number, so you can verify compatibility before purchasing a rebuild kit or attempting installation.
Frequently Asked Questions
Where exactly is the model number stamped on a Holley carburetor?
The model number is typically stamped on the passenger side of the main carburetor body, near the base where it bolts to the intake manifold. On some older or four-barrel models, it may appear on the driver's side or on the fuel bowl. Clean the area with a wire brush to make the stamping visible if it is covered in carbon or corrosion.
What do the numbers and letters in a Holley model number mean?
The first digits indicate the carburetor type and barrel count. The middle digits specify the fuel delivery system and original process. The final digits represent the revision or update level. A separate date code (letter and number) shows the month and year of manufacture, though you may need additional context to determine the exact decade.
Can I use an online database to find out what vehicle my Holley carburetor came from?
Yes. Enter the model number into a carburetor identification database or Holley's technical documentation to see the original process, engine size, and vehicle years. Cross-referencing the date code with the model number helps narrow down the exact production year if the carburetor was used across multiple model years.
How do I know if my Holley carburetor is original to my vehicle?
Compare the carburetor's model number to the specification in your vehicle's factory service manual or build sheet. If the numbers match and the date code falls within your vehicle's production year, the carburetor is likely original. If the model number is different or significantly newer, it is an aftermarket replacement installed by a previous owner.
What if the model number is worn away or illegible?
Post a clear photo of the carburetor to a classic car or engine forum. Experienced restorers can often identify a carburetor from its physical features—barrel count, fuel inlet location, choke type, and mounting flange—even if the stamped number is partially worn. They can also help you find the correct rebuild kit for your specific model.