LQ9 cam bearing replacement costs between $800 and $2,500 depending on whether you do the work yourself, take it to an independent shop, or go to a dealership
The LQ9 is a 6.0-liter V8 engine used in Chevrolet and GMC trucks and SUVs from 2005 onward. Cam bearings wear over time and can fail, requiring replacement. The total cost breaks down into parts, labor, and whether you're replacing just the bearings or doing additional work while the engine is apart.
If you have machine shop experience and the right tools, you can buy the bearing set for $150 to $400 and do the work yourself — but this requires removing the cylinder head and having access to a press or bearing installation tool. Most people pay a shop instead. An independent shop typically charges $1,200 to $1,800 total. A Chevrolet or GMC dealership usually charges $1,800 to $2,500.
Key Takeaways
- Cam bearing replacement on an LQ9 requires removing the cylinder head, so labor makes up most of the cost.
- Parts alone (bearing set, gaskets, and seals) run $300 to $600 at most shops.
- Independent shops typically charge less labor than dealerships for the same work.
- Many shops recommend replacing valve cover gaskets and intake manifold gaskets while the head is off, which adds $200 to $400 to the bill.
What the parts themselves cost
Cam bearings for the LQ9 come as a complete set and cost between $150 and $400 depending on the supplier and whether you choose OEM (Chevrolet factory) parts or aftermarket. OEM bearing sets run closer to $300 to $400. Aftermarket sets from suppliers like Clevite or Federal-Mogul run $150 to $250.
You will also need new gaskets and seals because the cylinder head has to come off. A valve cover gasket costs $20 to $40. Intake manifold gaskets run $30 to $80. Head gasket material, if the shop replaces it, adds another $50 to $150. Most shops bundle these into the job rather than charge separately.
Labor costs at independent shops versus dealerships
An independent repair shop typically charges $800 to $1,400 in labor for cam bearing replacement on an LQ9. This assumes the bearings are the only problem and the head comes off cleanly. The job usually takes 6 to 10 hours depending on how much corrosion or stuck fasteners the technician encounters.
A Chevrolet or GMC dealership charges $1,200 to $1,800 in labor for the same work. Dealerships have higher hourly rates (often $150 to $200 per hour versus $100 to $130 at independent shops) and may charge diagnostic fees before confirming the bearings are the problem. However, dealerships typically warranty their work for longer periods.
When shops recommend additional work
Once the cylinder head is off an LQ9, shops often find other wear items worth replacing. Valve cover gaskets frequently leak and are straightforward to replace while the head is accessible. Intake manifold gaskets often show age. Some shops recommend replacing the spark plugs and plug wires at the same time since the engine is already open.
These add-ons typically cost $200 to $500 combined. A shop should ask your permission before doing work beyond the original estimate. If you want to keep the bill down, you can decline additional work and have the shop focus only on the bearings and necessary gaskets.
Doing the work yourself
If you have machine shop experience, a press, and bearing installation tools, you can buy the bearing set for $150 to $400 and install them yourself. This requires removing the cylinder head, which means draining coolant, disconnecting hoses and wiring, and unbolting the head from the block. You will also need a torque wrench to reinstall the head bolts to the correct specification.
The real challenge is pressing the old bearings out and the new ones in without damaging the bearing bores. Many home mechanics rent or borrow a bearing press from a tool library or machine shop for $30 to $75 per day. If you make a mistake during installation, you risk scoring the bearing bore, which turns a $300 repair into a $2,000+ machine shop job to fix the bore.
Factors that change the final bill
The condition of your engine affects cost. If the bearings have already failed and spun, metal debris may have circulated through the oil and damaged the crankshaft journals. A machine shop will need to inspect and possibly grind the journals, which costs $400 to $800 extra. If the head is stuck or fasteners are seized, removal takes longer and labor costs rise.
Your location also matters. Shops in rural areas or smaller cities typically charge less per hour than shops in major metropolitan areas. The specific year and trim of your truck can affect parts availability — some model years have more common bearing sets than others, which changes sourcing time and cost.
Getting an estimate before committing
Call three shops — at least one independent and one dealership — and describe the symptom (noise from the top of the engine, low oil pressure, or whatever you're experiencing). Ask for a written estimate that includes parts, labor hours, and any gaskets or seals they plan to replace. A good estimate should also note whether they will inspect the crankshaft journals and what that costs if damage is found.
Ask whether the estimate includes reinstalling the head with new bolts (some shops reuse bolts, others replace them for $50 to $100 extra). Ask how long the job takes and when they can fit you in. Some shops have a backlog and may take weeks; others can start sooner. A shop that gives you a firm estimate in writing is easier to compare than one that quotes a range over the phone.
Frequently Asked Questions
How do I know if my LQ9 has bad cam bearings?
Common signs are a ticking or knocking noise from the top of the engine, especially when cold, low oil pressure readings on the gauge, or the check engine light coming on with a code related to oil pressure. A shop can confirm by removing the valve cover and inspecting the bearings visually, or by measuring oil pressure with a gauge.
Can I drive the truck if the cam bearings are worn?
Short distances at low speeds are usually safe, but extended driving risks complete bearing failure, which can score the camshaft and crankshaft. Once a bearing spins, metal shavings circulate in the oil and damage other engine parts. It is better to have the work done before the bearing fails completely.
Will the shop replace the head gasket while it's off?
Most shops will replace it if you ask, though it is not always necessary if the gasket is not leaking. Ask the shop to inspect it during removal and recommend whether replacement is needed. If the gasket is good, you can skip it and save $100 to $200.
How long does the repair take?
Most shops complete the job in one to three days depending on their schedule and whether complications arise. If the head is stuck or fasteners break, it may take longer. Ask the shop for a timeline when you drop the truck off.
Is there a difference between OEM and aftermarket cam bearings?
OEM bearings are made by the original supplier and carry Chevrolet's warranty. Aftermarket bearings from established manufacturers like Clevite meet the same specifications and cost less. Both are reliable; the choice usually comes down to budget and whether you want the factory warranty.