You can replace most key fob batteries yourself in under five minutes
A dead key fob battery is one of the easiest car problems to fix without a mechanic. Most fobs use a standard coin-cell battery — usually CR2032, CR2025, or CR2016 — that costs between $3 and $8 at any drugstore or supermarket. The replacement takes longer to find the battery aisle than to swap it in. You need a flathead screwdriver or a coin, the new battery, and nothing else.
The hardest part is opening the fob without breaking the plastic. Most fobs have a seam running around the edge where the two halves snap together. Once you find that seam and pry gently, the battery compartment is usually visible when ready. After you note which side of the battery faces up, you slide the old one out, drop the new one in the same way, and snap the fob back together.
Key Takeaways
- Most key fob batteries are standard coin cells (CR2032, CR2025, or CR2016) that cost $3 to $8 and are sold at drugstores, supermarkets, and gas stations.
- The fob opens by prying along the seam where the two plastic halves meet — use a flathead screwdriver, coin, or plastic pry tool to avoid cracking the case.
- Note which side of the battery faces up before you remove it, then insert the new battery the same way to avoid a non-working fob.
- If the fob still does not work after a new battery, the problem is usually a corroded battery contact or a broken button, not the battery itself.
Finding the right battery for your fob
The battery type is printed on the old battery itself, so the easiest way to know what to buy is to open the fob first and look. If you want to know before you start, check your vehicle's owner manual — most list the battery type in the key fob section. You can also search online for your car's year, make, and model plus "key fob battery" and find the part number in seconds.
CR2032 is by far the most common, used in the majority of Toyota, Honda, Ford, and Chevrolet fobs. CR2025 and CR2016 are thinner versions used in some luxury brands and older fobs. The numbers refer to the battery's diameter and thickness in millimeters, so using the wrong size can mean the battery sits loose in the compartment or does not fit at all. Buy the exact type your fob needs.
You do not need a special battery — any brand works. Dollar stores, CVS, Walgreens, Target, and Costco all stock these batteries in their watch and electronics sections. Gas stations carry them too, usually at the register. A pack of two or four costs only slightly more than a single battery, so buying a spare is practical if you have multiple fobs.
Opening the fob without breaking it
Look at the edge of your fob and find the seam where the two plastic halves meet. On most fobs this seam runs vertically down one side or horizontally across the middle. Some fobs have a small slot or notch cut into the seam to give you a place to insert a tool. If you see one, that is your starting point.
Use a flathead screwdriver, a coin, or a plastic pry tool (sometimes called a spudger). Avoid a knife or anything sharp that can slip and cut your hand. Insert the tool gently into the seam and twist or pry slowly — the goal is to separate the two halves, not to force them apart. If the fob does not budge after light pressure, try a different spot along the seam. Most fobs have a weak point where the plastic is thinner and easier to open.
Once you feel the halves start to separate, work your way around the seam with gentle pressure. The plastic clips holding the two halves together will pop free one by one. If you hear a crack, stop and try a different angle — cracked plastic is permanent, but a stubborn fob will eventually open with patience.
Removing and replacing the battery
With the fob open, you will see the battery sitting in a small metal or plastic holder. Before you touch it, note which side faces up — the positive side (marked with a + sign) or the negative side (marked with a − sign or left blank). This matters because a battery inserted backward will not work.
Slide the old battery out of its holder. If it is stuck, use your fingernail or a plastic tool to gently pry one edge up. Do not use a metal tool that can scratch the contacts inside the fob. Once the old battery is out, look at the metal contacts where the battery sits. If they are green, black, or crusty, that corrosion can prevent a new battery from working even if the old one was dead. Wipe the contacts clean with a dry cloth or a pencil eraser.
Slide the new battery into the holder with the same side facing up as the old one. It should sit flat and snug. If it feels loose or rocks side to side, you may have the wrong battery size — double-check the part number on the battery against what your fob needs.
Closing the fob and testing it
Align the two halves of the fob so the seam lines up evenly. Press down firmly and listen for the plastic clips to snap back into place. You may hear or feel a series of small clicks as the clips engage. Press around the entire edge to make sure both halves are seated fully — a fob that is not closed all the way can let moisture in and damage the electronics.
Test the fob by pressing each button while standing near your vehicle. The lock and unlock buttons should work when ready. If nothing happens, open the fob again and check that the battery is inserted the right way — positive side up. If it is correct and the fob still does not work, the problem is usually corroded contacts or a broken button, not the battery.
When a new battery does not fix the problem
If you installed a fresh battery and the fob still does not work, the issue is almost always inside the fob, not the battery itself. The metal contacts where the battery sits can corrode over time, especially if moisture got inside. Clean them again with a pencil eraser or a small piece of fine sandpaper, then test the fob once more.
If cleaning the contacts does not help, one of the rubber buttons inside the fob may be worn out or the circuit board may be damaged. These parts are not worth replacing — a new fob costs $50 to $150 depending on your vehicle, and a used fob from a salvage yard or online seller costs $20 to $40. Many dealerships and locksmiths can program a used fob to your vehicle for $50 to $100.
Before you buy a replacement fob, try one more thing: press each button hard while the fob is open and you can see the rubber pad underneath. If the button does not make contact with the circuit board, the rubber pad is worn and the fob cannot be repaired at home. This is a sign to move on to a replacement.
Frequently Asked Questions
Can I use a different battery size if I cannot find the exact one?
No. A battery that is too thick will not fit in the compartment, and one that is too thin will sit loose and lose contact with the metal terminals. Loose contact means the fob will not work reliably or at all. Stick to the exact part number your fob needs.
What if I put the battery in backward?
The fob straightforward will not work. Open it again and flip the battery so the positive side (marked +) faces up, which is the standard orientation. If you are unsure which side was up in the old battery, check the metal contacts inside the fob — one is usually slightly raised or shaped differently to guide the battery in the correct direction.
How long does a key fob battery last?
Most key fob batteries last three to four years with normal use. Heavy use — pressing the buttons many times per day — can shorten that to two years. There is no way to predict exactly when a battery will die, so replacing it as soon as the fob stops working is the fastest fix.
Do I need to reprogram my fob after changing the battery?
No. Changing the battery does not erase the fob's programming. Once you install the new battery and close the fob, it should work when ready without any reprogramming steps.
Is it safe to throw away the old battery?
Coin-cell batteries can be recycled at most drugstores and supermarkets — many have a battery recycling bin near the checkout or customer service desk. You can also check Earth911.com or Call2Recycle.org to find a recycling location near you. Throwing batteries in the trash is legal in most places, but recycling is better for the environment.