A revise is a retest of your car after it has failed its MOT

When your car fails its MOT, you have the option to book a revise — a retest at the same testing station, usually within 10 working days of the original failure. You pay a reduced fee (typically £25 to £30, though this varies by test centre) rather than the full MOT price. The revise tests only the items that failed the first time, not the entire vehicle again.

A revise is not the same as a new MOT. You are not retesting everything; you are proving that the specific faults have been fixed. This matters because it means you do not have to pay for a full retest, and the test centre already has a record of what went wrong.

You must book your revise within 10 working days of the original failure date. After that window closes, you will need to book a full MOT instead. The 10-day window gives you time to have the faults repaired without losing the reduced-fee option.

Key Takeaways

  • A revise is a retest of only the failed items from your original MOT, not a full vehicle retest.
  • You must book the revise within 10 working days of the failure date, or you will need to pay for a full MOT instead.
  • The revise fee is lower than a full MOT — usually £25 to £30 — because the test centre is only checking specific faults.
  • If your car fails the revise, you can book another revise within 10 working days, but each one costs the reduced fee.
  • Your original MOT certificate remains void until you pass the revise; your car is not legally roadworthy until then.

How the revise process works step by step

After your MOT failure, the test centre will give you a MOT failure report that lists every fault found. This report is your guide for repairs. Take it to a mechanic or repair shop and have them fix the specific items listed — do not assume you know what needs fixing without the report.

Once repairs are complete, contact the same test centre and book your revise appointment. You will need to provide your registration number and the date of your original failure so they can pull up your test record. Bring your car and your failure report to the appointment.

During the revise, the tester will inspect only the items that failed before. They will not run the full MOT sequence again. If all the faults have been corrected, you will pass and receive a new MOT certificate valid for 12 months from the date of your original test — not from the revise date. If any of the original faults remain, or if new faults are found in the items being checked, you will fail again.

If you fail the revise, you can book another revise within 10 working days of that failure, paying the reduced fee again. However, if you do not book within the 10-day window, your next test will be a full MOT at full price.

What happens if you fail the revise

A failed revise means at least one of the original faults was not properly repaired, or a new fault appeared in one of the tested areas. The test centre will issue another failure report showing which items still need work. You then have two choices: book another revise within 10 working days, or wait and book a full MOT later.

Each revise costs the reduced fee, so multiple retests can add up. However, they are still cheaper than paying for a full MOT each time. The key is to make sure the repairs are done properly the first time — rushing a repair to meet the 10-day important date often leads to another failure.

If you decide not to revise and instead wait, your car remains unregistered and cannot be driven legally on the road. You will need to book a full MOT when you are ready, and it will test the entire vehicle again, not just the original faults.

Costs and timing for a revise

The revise fee is set by individual test centres, but the maximum is capped by the Driver and Vehicle Standards Agency (DVSA). As of current rates, a revise typically costs £25 to £30, compared to a full MOT which costs around £40 to £55 depending on vehicle type and location. Some test centres may charge less than the maximum.

The timing window is firm: 10 working days from the date of your original failure. Weekends and bank holidays do not count toward this total. If your failure date was a Friday, the 10 working days begin on Monday. You must have your revise appointment booked and completed within this window to use the reduced fee.

The actual retest usually takes 30 to 45 minutes, depending on how many items failed and how thorough the inspection needs to be. Book your appointment in advance rather than turning up on the day, as test centres often have limited slots available.

Why repairs sometimes fail the revise

The most common reason for a revise failure is incomplete repair work. A fault listed as "brake pad thickness below minimum" requires the pads to be replaced; a temporary fix or partial replacement will fail again. Similarly, a failed emissions test requires the underlying engine problem to be diagnosed and fixed, not just the sensor replaced.

Another reason is that the repair was done but not properly tested. For example, a faulty brake light may have been replaced, but the new bulb was not seated correctly or the wiring connection was not fully tightened. The tester will find this when ready.

New faults can also appear during a revise if the original repair work damaged something else. This is rare but can happen if a mechanic disturbs other components while fixing the failed item. If a new fault appears that was not on the original failure report, you will fail the revise, but you can dispute this with the test centre if you believe the fault was pre-existing.

Revise versus booking a new full MOT

The choice between a revise and a new full MOT depends on your situation. If you are within the 10-day window and confident the repairs are done correctly, a revise saves money and time. If you have missed the 10-day important date, you have no choice — you must book a full MOT.

If you are unsure whether the repairs are complete, or if you want a full vehicle inspection to catch other potential problems, you can choose to book a full MOT instead of a revise, even within the 10-day window. This costs more but gives you a complete picture of your car's condition. Some owners do this if they have had the car for a while and want peace of mind.

One important note: if you book a full MOT instead of a revise, and you do it before the 10-day window closes, your new MOT certificate will be dated from the new test date, not the original failure date. This means you will lose the time already counted toward your 12-month certificate.

How to avoid needing a revise in the first place

The best way to avoid a revise is to have your car serviced and inspected before the MOT. Many garages offer a pre-MOT check that identifies common failure points: brake pad wear, tyre tread depth, light bulbs, fluid levels, and emissions. Fixing these issues before the test costs less than paying for a failure and revise.

Keep records of your maintenance and repairs. If you have recently replaced brake pads or had work done on the exhaust, bring those records to the MOT. They help the tester understand the condition of your car and can prevent disputes if a fault is found.

Drive your car regularly and listen for warning signs: unusual noises, warning lights on the dashboard, soft brakes, or poor handling. These often indicate faults that will show up on the MOT. Addressing them early is cheaper than waiting for the test to fail.

Frequently Asked Questions

Can I drive my car while waiting for the revise appointment?

No. Once your MOT has failed, your car is not legally roadworthy and cannot be driven on public roads, even to the repair shop. You can only drive it to a pre-booked MOT or revise appointment, or to a garage for repairs. If you are caught driving a failed car, you can be fined.

What if the test centre loses my failure report?

The test centre keeps a digital record of your failure, so they can look it up using your registration number and the failure date. However, keep your own copy of the failure report as backup. If there is a dispute about what failed, your copy is proof of what the tester found.

Do I get a new MOT certificate if I pass the revise?

Yes, you receive a new MOT certificate valid for 12 months. However, the certificate is dated from your original MOT test date, not the revise date. This means your 12-month period runs from the first test, not the second.

Can I revise at a different test centre than the one that failed me?

No. A revise must be done at the same test centre where you failed. If you want to use a different centre, you must book a full MOT instead and pay the full fee. This rule exists so the test centre can verify the repairs against their original failure record.

What if I repair the car myself — will the revise still count?

Yes. The revise does not care who did the repairs, only whether the faults have been fixed. If you have the skills and tools to repair the faults listed on your failure report, you can do the work yourself and bring the car to the revise. The tester will only check whether the faults are gone.